|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Walnut, United States CONNECT WITH VIPMOTOZ.
Buy It Now
$8.00 Shipping Condition: New Location: Chino, United States Product size: crossbar length: 828mm Branch pipe length 257mm Product material: stainless steel Product net weight: 7.5kg Fixture adjustment angle: about ... more35°.
Buy It Now
$16.68 Shipping Condition: New Location: FAREHAM, United Kingdom Bank Sticks / Buzzer Bars (37). Short, Chunky 20cm Fixed Buzzer Bars. Buzzer Bars. Fishing Line (12). Baiting Needle Throwing Sticks (9). Rod Pods (7). ... more2 x 2 rod Fixed. Stainless Steel.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Includes Rubber Cap, Tube Liner and Gasket,Stainless Steel Gimbal pin. USES: BOATS & YACHTS Rod Rests and Holders. Flange : Angle = 90 Degree. Surface ... moreFinish:Polished. We will try our best to reduce the risk of the custom duties.
Buy It Now
Free Shipping Condition: New Location: Monsey, United States ADAPTABILITY: OJY Vertical Fishing Rod Holder uses Rubber band clamp technology instead of EVA foam, which has been criticized by users, so that it can ... moreadapt to 99% of fishing rods on the market. Whether it is a small creek rod or a large sea rod, this product can easily hold.
Buy It Now
Free Shipping Condition: New Location: Buffalo, United States This set holds up to five rods and is easy to install and use. It includes a 10-In. (25 cm) strap to secure the handle end of the rods, a 6-In. to 1 1/4-In. ... moreThis set can be used with all Attwood mounts, including the Combo Mount, Attwood standard side mounts, and other popular rod holder mounts.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States The fishing rod holder is marked by spike design, so it can be easily inserted into the ground to stabilize without rotating. 1 x Fishing Rod Holder (Others ... moreNot Included). The spikes are easily inserted into the ground to stabilize without rotating.
Buy It Now
Free Shipping Condition: New Location: United States Mooring Cleat & Bollard. table bracket. motor bracket. Outboard Motor Bracket. cup holder. USES: BOATS & YACHTS Rod Rests and Holders. Material: Stainless ... moreSteel. Surface Finish: Polished.
Buy It Now
$3.95 Shipping Condition: New Location: Asbury Park, United States Taco Econo Super Rod Holder, Bulk The stand-offs are molded-in. Stainless steel mounting hardware is included. Flared opening with notch for secure storage. ... more.
Buy It Now
Free Shipping Condition: New Location: Lathrop, United States Easy to use: Long spike is very easy to plug into the soil stable and not spin. Rust Corrosion Resistance: made of high quality stainless steel that is ... moreStrong and abrasive resistance. UNIVERSAL FIT: 1.38" width, enough to adapting to general most rods like spinning, casting and spincast rod.
Buy It Now
Free Shipping Condition: New Location: Omaha, United States Multipurpose, use around the house in the office, kitchen, and garage.
Buy It Now
$3.99 Shipping Condition: New Location: Lawrenceville, United States Holds up to 4 rods per unit while slow trolling for crappie. Four rod holder Full adjustability for rod angle.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States High Top Folding Bistro Table Cafe Round Outdoor Patio Cocktail Party Porch Side. Car Portable Detailing Steam Cleaner Vehicle Auto Dirt Removal Cleaning ... moreMachine. Heavy Duty Adjustable Outdoor Camping Rotisserie Grill Pig Lamb BBQ Roast Kit.
Buy It Now
Free Shipping Condition: New Location: Wilmington, United States This item fits on any mounting hole on the YETI LoadOut Bucket and is specifically designed for Coaster-style can holders and Yeti Rambler style tumblers. ... moreIt does NOT fit large foam coozies. This item fits the YETI LoadOut Bucket ONLY.
Buy It Now
Free Shipping Condition: New Location: Flagstaff, United States Designed for versatility, these fishing pole holders for boats and kayaks are suitable for various fishing styles, including drift fishing, pan fishing, ... moreand crappie fishing. Whether you're on a kayak or a boat, this rod holder enhances your angling experience.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product size: crossbar length: 828mm Branch pipe length 257mm Product material: stainless steel Product net weight: 7.5kg Fixture adjustment angle: about ... more35°.
Buy It Now
Free Shipping Condition: New Location: China 1 Piece Fishing Rod Pole Holder. UNIVERSAL FIT: Accommodates, casting and rod handles. COMPONENTS: The rod support is composed of two separate pieces ... morethat are screwed together in sturdy unit: the white tubular pole holder and the.
Buy It Now
Free Shipping Condition: New Location: United States Rubber Insert to protect your fishing rod from any wear against the aluminium surface. Gimbal pin rod stopper, Solid construction - no moving parts. 3 ... moreracks rod holder. Material : Aluminum, Super light but Heavy Duty.
Buy It Now
Free Shipping Condition: New Location: Wisconsin Dells, United States ROD HOLDER TRACKER BOAT VERSATRACK SYSTEM Made in USA by WOODLANDER OUTDOORS This listing is for: 4x VERSATRACK ROD HOLDER BRACKET WITH INSTALLED CANNON ... moreROD HOLDER(four pack) ORIGINAL- TESTED& APPROVED BY 100's OF HAPPY CUSTOMERS IN PRODUCTION SINCE 2011! OVER 1700 SOLD! DESCRIPTION: Ø Brackets are made from Aircraft grade aluminum(NO PLASTIC– NO WOOD) 1/8" thick 2 x 7 3/4" plate& 1" x 1 1/2" x 1/8" supports- riveted on the plate. Finished with ceramic paint- strong and durable. Ø Preinstalled CANNON ROD HOLDER(360 ° adjustable– horizontally and vertically Ø Easy to install/ reposition/ remove. Ø Proven and tested on all types of fishing- even deep trolling for salmon- or large lake trophy musky fishing. Ø Will not damage paint on your boat Ø EXTREMLY STURDY DESIGN- Your fishing rod may fail- but your holder will not. INCLUDED: 4x bracket· 8x carriage bolts· 8x plastic washers· 8x prong knobs· 4x Installed Cannon Rod Holder Please note that this listing is for bracket with installed cannon rod holder. I’m aslo selling plain brackets with no accessory installed. Please see other my other listings for this option. SIMPLE& EASY INSTALATION: Easy installation: slide bolts to your boat gunnel system- slide bracket on the bolts. Tie the knobs- that's all I’m selling versatrack brackets& also brackets with CANNON Holders preinstalled. Please see my other listings. Below is price chart for your quantity saving options. CHECK MY OTHER LISTINGS FOR MORE OPTIONS: BRACKET WITH OUT HOLDER BRACKET WITH CANNON ROD HOLDER Count Price Price/ each Count Price Price/ each 1 $18.99 $18.99 1 $48.99 $48.99 2 $36.99 $18.49 2 $95.98 $47.99 3 $53.99 $17.99 3 $140.97 $46.99 4 $69.99 $17.49 4 $183.96 $45.99 6 $103.99 $17.33 6 $268.99 $44.83 FREE SHIPPING ON ALL ROD HOLDER LISTINGS LIFETIME WARRANTY RETURNS/ WARRANTY: 30 days money back guarantee LIFETIME WARRANTY: Even if Ebay’s“30 day return guarantee” expire- feel free to contact me fo
Buy It Now
Free Shipping Condition: New Location: Jacksonville, United States C.E. Smith Flush Mount ROD HOLDER 15 Degree Tilt 53681CA ~ WORLDWIDE SHIPPING! FLUSH MOUNT Stainless Steel Rod Holders With 1/2" Threaded Drain These ... morelarger 80C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance. Or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 15° LENGTH: 10-1/2" I.D. 1-7/8" We accept PAYPAL and ALL MAJOR CREDIT CARDS. If you have any trouble at all with payment. Email us and we can help. Please pay for your items within two days to assure your item will be shipped in a timely manner. MOST items go out within one business day! However some items must be special ordered or they are buy to order and will take 2-3 days before shipping. Most of our items are shipped using a flat rate. Which is the same amount regardless of where you live. We ship using your Paypal or Credit Card address, so make sure it is correct. We do ship internationally. Orders may be delayed for up to 7 days, as some of our suppliers do not ship internationally. We ship all international shipments USPS priority or first class. If a package is too large to ship USPS, we will notify you. PLEASE CHECK AVAILABILITY BEFORE BUYING. Occasionally we will have an item that we cannot get to you right away. This is because our supplier ran out of the item before we could remove the listing. We make every effort to keep our listings current. But now and then one slips by us. When this happens, you will be contacted immediately. IF WE DO NOT HAVE THE ITEM YOU ORDERED FOR SOME REASON, PLEASE DO NOT GIVE NEGATIVE FEEDBACK. RETURNS: 100% MONEY BACK GUARANTEE! AFTER RECEIVING YOUR ITEM, IF YOU ARE NOT HAPPY, RETURN IT WITHIN 14 DAYS, AND W
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States There is an adjustable knob on the outside of the umbrella stand. Are you looking for a professional, yet affordable fishing umbrella stand mount support?. ... moreAre you in search of a sturdy, trustworthy tool that can do multiple jobs at once?.
Buy It Now
Free Shipping Condition: New Location: Foxboro, United States Features: ---Designed to be installed on a flat surface such as the deck or on a vertical surface ---Locking feature requires the release of plunger to ... moreremove the rod holder ---Four hole mounting pattern: 3.18" x 1.3" ---Compatible with RAM post and spline rod holders and RAM wedge mount ball adapters ---Constructed of high strength composite ---Genuine RAM Mount: Part # RAM-114BMPU ---Manufacturer's Lifetime Warranty ---Made in the USA.
Buy It Now
Free Shipping Condition: New Location: Austin, United States Viking VKS-VFR001 Fishing Rod Rack. Its light weight lets you move it with ease. Durable powder coat finish will last for years full 2 year. Adjustable ... moreto accommodate most rod sizes no water-collection design allows rods to be rinsed off in the rack.
Buy It Now
$6.16 Shipping Condition: New Location: Encinitas, United States Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed ... moreEnd of set. Vinyl insert protects the Rod Butt.
Buy It Now
Free Shipping Condition: New Location: Moreno Valley, United States NovelBee Aluminum Alloy Boat Propeller for Yamaha 9.9-15 HP Outboard Motor. NovelBee 4 Rolls Thin Foam Tape,Seal Weather Stripping Tape for Doors and ... moreWindow. NovelBee Marine Access Hatch,10-5/8" X 14-3/4" Boat Deck Hatch Lid for Marine Ca.
Buy It Now
Free Shipping Condition: New Location: United States Suitable Size: this aluminum downrigger bracket of approx. Quality Material: the boat accessories are made of quality aluminum alloy, sturdy, rust resistant, ... moredurable, and corrosion resistant; This material is processed through CNC, which gives the downrigger bracket its robustness and substantial strength, making it long serving even in harsh weather conditions.
Buy It Now
Free Shipping Condition: New Location: Rocklin, United States Increase your odds with easier access to your rod and reel. Made from super tough glass-filled nylon, this extension is built to withstand the rigors ... moreof fishing in any conditions. Allows for faster access to your rod and reel.
Buy It Now
Free Shipping Condition: New Location: United States Standard 15 degree angle to vertical. Polished 304 stainless steel top plate. 304 stainless steel tubing. Stainless Steel Gimbal pins. Includes Rubber ... moreCap, Tube Liner and Gasket.
Buy It Now
Free Shipping Condition: New Location: Everett, United States Can Clamp on anywhere. Adjustable in angle.
Buy It Now
Free Shipping Condition: New Location: Tarpon Springs, United States NEW CONSOLE OR WALL MOUNT FISHING ROD HOLDERS WITH INDEPENDENT AUTO-SECURE BUNGEE LOCK. PERFECT FIT FOR ANY CENTER CONSOLE FISHING BOAT. MOUNTING INSTRUCTIONS. ... moreRODS ARE SAFE & SECURED YET READY FOR USE.
Buy It Now
Free Shipping Condition: New Location: Denver, United States Easy to use: Long spike is very easy to plug into the soil stable and not spin. Rust Corrosion Resistance: made of high quality stainless steel that is ... moreStrong and abrasive resistance. UNIVERSAL FIT: 1.38" width, enough to adapting to general most rods like spinning, casting and spincast rod.
Buy It Now
$8.05 Shipping Condition: New Location: Spring Valley, United States HERE IS A CUSTOM MADE INEXPENSIVE LIGHT WEIGHT FLOAT TUBE HOLDER TO MOUNT YOUR HUMMINBIRD FISHIN' BUDDY FISH FINDER ON YOUR FLOAT TUBE OR PONTOON.HAS ... moreA DOUBLE STRAP ON TOP TO HOLD YOU FISH FINDER STABLE.MADE TO WORK WITH ALL FISHIN' BUDDY FISH FINDERS.EXCEPT MAX DL WITH 5" FOOT.
Buy It Now
Free Shipping Condition: New Location: Corona, United States Fishing Pole Base Mount Designed from Precision CNC. Rubber Plastic Dip Coated Claw Handle to Secure a good Grip for the Fishing Pole Rod. Clamp Base ... more: 1.75". Zinc Plated Steel Rod. The Rubber Claw will Not Scratch or Leave Marks on your Rod.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Package length: 35.306 cm Package width: 13.462 cm Package height: 8.382 cm Product Type: FISHING EQUIPMENT
Buy It Now
Free Shipping Condition: New Location: Seattle, United States SquareTrade © AP6.0 Up for your consideration FOLBE ADVANTAGE ROD HOLDER 8 1/2" ADJUSTABLE EXTENSION POST! Description: FOLBE ADVANTAGE ROD ... moreHOLDER 8 1/2" ADJUSTABLE EXTENSION POST! The Double End Extension Post adds 8 ½” to the standard post. This post gives adjustment at both ends. Utilizing both vertical and horizontal adjustment. Two different angles on the teeth give a finer angle adjustment on the rod holder. Made of the best marine grade materials for strength and reliability. Our post resists twisting and bending. It is rated to 50 lbs of tip pressure to the end of the extension(on a straight downward pull) Sideways pulling greatly decreases the amount of pressure that can be applied in a safe manner, but this post is still very solid. This kit includes the extension post. Knob and bolt set, as well as the short post. This kit is designed for upgrading older rod holders to ensure you get the newest and best materials. Increases height 8 ½” over stock gear. The most adjustable extension post available. Super tough materials won't bend or twist. Excellent for when height and adjustment ability is needed. Made in USA, BE SURE TO CHECK OUT ALL OF OUR SPORTING GOODS LISTED HERE ON EBAY We are always willing to combine shipping to save you money Auction Includes: THIS is a sale for One(1)FOLBE ADVANTAGE ROD HOLDER 8 1/2" ADJUSTABLE EXTENSION POST only(as described& pictured) Condition: The FOLBE ADVANTAGE ROD HOLDER 8 1/2" ADJUSTABLE EXTENSION POST is new. all pictured) Shipping on this item is: USPS Priority shipping is $9.00 Tracking is Included! We will gladly combine shipments to save you money Bid with COMPLETE confidence as our feedback rating is excellent with over 20.000 feedbacks! Reference number: Do not bid unless you have 6 or more positive feedbacks unless you have written requesting permission. To the Lucky Winner: Please contact me within 48 hours and let me know how you will be paying. We accept Paypal. AND LOCAL PICK-UP. IF YOU USE PAYPAL, WE ONLY SHIP
Buy It Now
Free Shipping Condition: New Location: Flagstaff, United States Template By Froo! Fishing Pole Organizer Overhead Ceiling Rod Holder Space Saver Storage Rack NEW Organize your rod collection. Protect them from damage, ... moreand increase accessibility. Organize 12 rods overhead with this simple, sturdy rack. Protect rods by keeping them out of the way. Easily find and access rods when you need them. For Indoor/ Outdoor Use- Not affected by sun or salt. Mount under Boat Bimini Top, in pickup truck topper, garage, basement, boat house, camp or cabin. Strong steel construction encased in polyeurothene? similar to dishwasher racks, keeps your rods pristine. Rack’Em? racks are unaffected by salt, cleaning solvents, oils or greases. Holds all sizes and styles of rods- from kids’ rods to off-shore rods. Rack'Em racks install in 10 minutes or less! Rack is screwed into the wall with the included mounting screws. TOOLS NEEDED FOR INSTALLATION: Phillips screwdriver(screws included) DIMENSIONS? 28.25"L x 4"H Width adjustable to fit your rods! Store. Organize& Protect Fishing Rods For Indoor/ Outdoor Use- Not affected by sun or salt Mount under Boat Bimini Top. In pickup truck topper, garage, basement, boat house, camp or cabin Strong steel construction encased in polyurethane? similar to dishwasher racks. Keeps your rods pristine DIMENSIONS: 28.25-Inch Length x 4-Inch Height Width adjustable to fit your rods! Mounting screws included About Us We're a genuine seller offering quality items at lower prices. Every item is carefully packaged using the latest technology to ensure safe shipment to you. Currently all of our products are being shipped FREE to your location. Enjoy your visit! Please note that it may take a day longer to respond to buyers in different time zones. Payment We accept payment by: Paypal. Shipping Details 1) We provide FREE SHIPPING within the Continental United States! 2) We ship to the lower 48 states only. NO shipping to Alaska. Hawaii, Puerto Rico, PO Box, APO/FPO. 3) FAST'N FREE is an eBay estimated transit time. Actual transit time is 4-14 busi
Buy It Now
Free Shipping Condition: New Location: Buffalo, United States 【Full Automatic Spring Fishing Rod Holder】 Our weyleity fishing bracket can sensitively detect fish biting the bait. So you just need to set up the fishing ... morerod, lie on the chair, relax your hands, and enjoy nature quietly.
Buy It Now
Free Shipping Condition: New Location: United States Feature: Spiral. Use scene: fishing. Other features: strong support, easy to use, and diverse use sites. The real color of the item may be slightly different ... morefrom the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping Condition: New Location: China Stainless stopper pin built into the base of the rod holder to located the rod butt into position. 1 x Fishing Pole Stand. Rubber insert to protect your ... morefishing rod from any wear against the stainless surface.
Buy It Now
$8.00 Shipping Condition: New Location: Chino, United States Product size: crossbar length: 828mm Branch pipe length 257mm Product material: stainless steel Product net weight: 7.5kg Fixture adjustment angle: about ... more35°.
Buy It Now
Free Shipping Condition: New Location: Erie, United States Holds up to 4 Rods. includes stainless steel mounting hardware.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States New as shown in pics
Buy It Now
Free Shipping Condition: New Location: United States ●Designed to hold the rod tip horizontally for straight-down fishing, the rod's V-shaped front allows for right or left hook sets, while the extended ... morecradle is contoured to provide hand clearance for quick grabs.
Buy It Now
Free Shipping Condition: New Location: Wetumpka, United States Silver Trac. Note: Not all request can be fulfilled.
Buy It Now
Free Shipping Condition: New Location: Foxboro, United States Features: ---RAM-TUBE 2008 fishing rod holder with single open socket ---Socket fits a variety of 1.5" RAM rubber ball bases(sold separately) ---Self-draining ... more/ quick access tube for the butt of most any fishing rod ---Inner tube length: 10" (from bottom to top of lip) ---Inner diameter: 1.9" ---Patented RAM rubber ball and socket feature, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle ---Constructed of extremely durable composite ---Works well with anything from Kayaks to Tournament boats ---Genuine RAM Mount: Part # RAP-119NBU ---Manufacturer's Lifetime Warranty ---Made in the USA.
Buy It Now
Free Shipping Condition: New Location: Ann Arbor, United States These are Top quality and the clips used on 99% of all fishing Rod racks. These clips have a hole inset on the bottom so the screw will not make contact ... morewith your fishing poles. The clip will spread open due to its flexibility and close back up when you place your poles inside them. These are also great for using in your garage or basement for out of the way storage. These are the perfect solution to do a DIY project. Please feel free to ask any questions you may have. Thanks.
Buy It Now
Free Shipping Condition: New Location: Erie, United States The 163 Top Plate Has Been Designed To Accept Large Fish Finders. The Bigger Ball Design Gives You A Much Greater Clamping Force For Larger Accessories ... moreWhile Still Having A Smooth Full Range Of Motion.
Buy It Now
Free Shipping Condition: New Location: Port Saint Lucie, United States FITS MOST 4K TO 10K SERIES REELS. Introducing our revolutionary universal Fishing Spinning Reel Holder Wall Mount, the ultimate solution for organizing ... moreand displaying your prized fishing reels! This one-of-a-kind wall mount is designed to securely hold your fishing reels while showcasing them in a stylish and functional manner.
Buy It Now
Free Shipping Condition: New Location: Foxboro, United States Features: ---High strength composite fishing rod holder and 6" spline post ---Supports any spinning reel or bait caster style rods ---Rod holder can rotate ... more360 degrees ---Adjusts forward and back for your best angle ---Latch locks your rod into the holder ---Vertical Bulkhead Spline Post Base with 4 pre-drilled holes ---Locks the rod holders spline post in place ---Genuine RAM Mount: Part # RAM-114-BU ---Manufacturer's lifetime warranty ---Made in the USA.
Buy It Now
Free Shipping Condition: New Location: Sun City Center, United States Untitled Document CLICK HERE For More Information About FREE SHIPPING or Receive Up to 75% Discount on Shipping Search: Click an Image to Enlarge Manufacturer ... more= Scotty Part Number = 241L-BK Condition = New in Box UPC = 062017402413 Angle = NONE Construction = NONE Diameter(Inches) = NONE Finish = NONE Length(Inches) = NONE Mounting Style = NONE 241 Combination Side or Deck Mount Can be mounted on top or side of gunnel. For all Scotty post mount rod holders. Dimensions: 4" x 2" x 2" Bolting Dimensions: 1 5/16" x 3 3/16" Shipping Policy- Item usually ships within 1-3 business days. We do offer a combine shipping discount on a case by case basis. If your other items are from same manufacturer. we do offer a combine shipping discount. Please contact us with the items you want to combine. For International Order. Please allow additional 5 days for processing. If you are outside of the United States. It is your responsibility to know your import tax laws and it will be your responsibility to pay those taxes. Cnwoutfiiter Is Not Responsible for International Customs Fees. Payment Options- Payment must be receive d with 3 days after the auction closed. Unpaid auction will be reported to ebay after 5 days from the date of purchase. We accept Paypal and all major credir card(Visa. MasterCard. Discover, and American Express) We ship based on date of payment cleared. We reserve the right to cancel transactions based on any of the following: Billing and shipping address mismatch*Payment flagged*No confirmed or verified PayPal address*New registered or zero feedback buyer with purchased amount US $200& above Customers Service If you have any question. Please contact us through ebay. If you have any problem with your order. Please contact us and we'll resolve your issue. We aim for five star service and we want you to be happy with our service. If the item(s) is damaged in transit. An exchange will be made or refund issued. We also offer a money-back guarantee on products returned within 10 days
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Install the flange mount into the 3/4" boat gangway with 2 countersunk screws, pull the strap over the rod and hook it into the deck mounted loop, then ... moreyou can attach the rod, easy to operate. Rod Holder For Boat is compact and easy to carry.
Buy It Now
Free Shipping Condition: New Location: Lathrop, United States [Easy installation] No special skills are required to install the fishing rod holder, just screw it into place, which is convenient for your fishing rod ... moreand fishing rod. It can be installed on concrete walls, tiles or wood.
Buy It Now
Free Shipping Condition: New Location: Clinton, United States Fishing rod holder's thickness is 1.5mm, much thicker than other fishing rod storage holder. Finished with black powder-coated, which provides maximum ... moreprotection, and prevents corrosion and scratch.
Buy It Now
Free Shipping Condition: New Location: Kodiak, United States The ceiling rod rack is ideal for getting rods out of the way, while utilizing space that simply can't be used for much else! High quality pine wood finish ... moreprovides a durable and long-lasting storage rack.
Buy It Now
Free Shipping Condition: New Location: Kearney, United States Just hook it onto an existing mooring cleat. More rods equal more fish! Occasionally, you need a strong, secure fishing rod holder. Well, this is the ... moresolution you've been waiting for! This Fishing Rod Holder is all about simplicity.
Buy It Now
Free Shipping Condition: New Location: Brooklyn, United States EASY TO INSTALL AND WIDELY USE - PLUSINNO fishing rod holders have 5 mounting holes to ensure can be securely mounted on the wall. PLUSINNO Fishing Rod ... moreStorage Rack will organize most of your fishing gear in minimum space and nice to satisfy your needs of storage and display in daily life.
Buy It Now
$9.00 Shipping Condition: New Location: Sheboygan, United States Product Description TrackStar Downrigger Bracket Combo includes: One(1) 45 Degree Angle Bracket with: Four(4) Stainless Steel 10-32 machine screws Four(4) ... moreStainless Steel flat washers Four(4) Stainless Steel lock washers One(1) TrackStar Bracket with: Two(2) Stainless Steel 1/4-20 bolts Two(2) Stainless Steel no slip washers Two(2) Three Prong Hand Knobs with Stainless Steel inserts Two(2) Support Braces with: Two(2) Stainless Steel 1/4-20 bolts Two(2) Stainless Steel 1" fender washers Two(2) Stainless Steel 1/4-20 nuts s The Mr. Potato Head of Gunnel Track Accessories! The 45° Downrigger bracket is tapped and threaded to accept Cannon's new Universal Mounting Base and aluminum mounting tracks. Along with downrigger mounts and aluminum track systems. The Downrigger Bracket with TrackStar combo allows an angler to easily customize their boat with cutting boards, gas grills, lighting systems, hunting blinds, tool trays.you name it. The 45° Downrigger Bracket comes with eight 1/4"20 tapped holes to help ease integration chores. And the 1/2" thick construction provides plenty of backbone to handle any applicable load. Both the TrackStar and Downrigger Brackets are constructed of fully machined, corrosion resistant, marine grade, Type II anodized 6061T6 aluminum. Furthermore. The kit includes two support braces to help minimize gunnel flex which is sometimes seen when applying heavier loads to the boat's gunnel track system. Finally. For oversized downrigger or swivel bases, our available bolts directly to the bracket surface to extend the mounting footprint! Please Note: due to the angle of the Downrigger bracket. This specific TrackStar gunnel track application is made exclusively for boats with 45° gunnels. TrackStar gunnel track brackets are compatible with all 1/4″ gunnel tracks from all boat manufacturers i.e. Tracker Boat's Versatrack. Lund Boat's Sport Trak, Crestliner Boat's Lock Track, Polar Kraft, Lowe, Triton, War Eagle, G3, etc. if your boat has a standard
Buy It Now
Free Shipping Condition: New Location: United States Suitable for most fishing rods including spinning, baitcasting, fly rods, ice rods, saltwater fishing rod and more! Can accommodate pretty big rods. It's ... morea great gift for the angler. PREMIUM FISHING ROD RACKS: The spacing of the wall mount fishing rod can be adjusted to fit your rod length.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Our holder is made of high-quality stainless steel and PVC material, which is sturdy and durable. Stainless Steel Rod Holder for Boat, Fishing Rod Holder, ... moreStainless Steel Rod Holder. Nylon Rope: It is used to tighten the rod holder or as a safety strap to prevent the rod from popping out or being pulled out of the rod holder.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Our holder is made of high-quality stainless steel and PVC material, which is sturdy and durable. Stainless Steel Rod Holder for Boat, Fishing Rod Holder, ... moreStainless Steel Rod Holder. Nylon Rope: It is used to tighten the rod holder or as a safety strap to prevent the rod from popping out or being pulled out of the rod holder.
|
|
|
|
2 Penn Fierce 3000 Spinning Reels
2 Penn 3000 FRC reels in excellent condition. FREE SHIPPING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147332ead93-0x10e-
|
|
|
fishing rod display rack holds 24 rods
pretty nice display rack holds 24 rods. rack is 34 inches tall and 13.5 inches at the base enjoy
|
|
|
4 Rod Holders: Tite-Lok Black Widow Spider Ultra Rigging System
4 Tite-Lok Rod Holders bought in March 2014 in excellent condition. Fourth holder never installed. Will hold a maximum of 4 poles per unit. Same rod holder at Bass Pro 144.99 plus tax per unit. You are bidding on 4 of the rod holders keep that in mind
|
|
|
VINTAGE FISHING POLE HOLDER 3 PLACE ROD/RACK REEL
You are bidding on a Plastic and Wooden 3 Place Rod/Reel Holder. Hardware looks to be stainless. Adjustable and usable as is but it would certainly benefit from a clean up and fresh stail. Actual cost shipping plus $1.50. Your purchase price but not shipping refunded if this item is returned. Thanks for looking and good luck bidding.
|
|
|
Boat Tower Stainless Steel with 8 Rod Holders
Stainless Steel boat tower with 8 stainless steel rod holders. There is also a small plate on top that a spotlight. Radar, or other equipment could be mounted. No damage or wear spots. Tubes are one piece and connection points are welded. Very strong and sturdy. All welds are solid. Approximate size is 6 feet tall and 8 feet wide. Four attachment points, each point accepts three screws or bolts. This could also be used on other vehicles for multiple different purposes. Delivery available within 100 miles of zip codes 23093(Louisa, VA) or 24401(Staunton, VA) Item is as is no warranty. Right reserved to sell in other forums. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1473864e96f-0x10f-
|
|
|
2 Tite Lok ajustable boat mount fishing Rod Holders Fishing
What your looking at is 2 Tite Lok ajustable Rod Holders Fishing. In good working condition. Some staining. Please ask any questions. Thanks for looking.
|
|
|
Berkley Horizontal Boat Rod Rack Fishing Pole Storage Wall, Truck, Boat - 6 Pole
Berkley Horizontal Boat Rod Rack Fishing Pole Storage Wall. Truck, Boat- 6 Pole Product Description Stores 6 rods neatly and securely Foam grip pads Like new. Removed from the packaging, never mounted/used.
|
|
|
(3) Three Lee Multi position Clamp on Rod Holders
There are some minor surface scratched. The sleeves inside come out and there is a bit of mold on them. They would probable bleach out. They are mulit position. Lee is top of the line and would look great on you boat. The diameter wit the sleeve is about 1 1/2" I have a set of Perko multi positioning as well. Just ask. No returns and no international shipping.
|
|
|
SAMPO LEATHER FISHING ROD HOLDER BIG GAME FISH FIGHTING HIP BELT
This is in great condition. There is some scuffs inside the butt holder from use. Belt is 50" in length
|
|
|
2-Vintage Red Metal Fishing Rod Holders-- Adjustable
2-Early Rod Holders-Adjustable Appx age 1970-1980s They could have been made in Japan? The leg you stick in the ground is 14.6" x 7" wide Will be taken apart for shipping No Returns accepted. Pay within 3 days. Shipping to continental USA only. Other locations please email me. No International buyers please.
|
|
|
Fishing Mini Downrigger,Fish On rod holders
Roberts(Atwood) mini portable downrigger with weight and line release clips. In original box. Works good and great for small boats.Canoes and pontoons. 2- Fish On Rod holders with mounting bracket. Both functional with top slider taken off and thrown away(very annoying) $100.00 new value.
|
|
|
Fishing Rod Lock, lot of 4 in boxes, by Lox-Ur-Rod Co., Minneapolis
Four boxes of these vintage rod locking hardware sets. One looks used. While the others seem new in the box. Boxes have some handwriting on them. Please view pictures, one of them is a scanned leaflet that's included with each one. Following blurb is the first part of the leaflet: Locks your rod and reel instantly in position for fishing-carrying-or storage. Two neoprene sleeves size the rod to fit the adapter. They hold it firmly yet flexibly, without changing the rod action. This positive security prevents damage or loss due to vibration, bouncing, fish, snag, or other hazards. The rod releases from its bracket instantly into your hand with less than 1/2 inch of movement, and in fish-fighting position. The smooth, streamlined brackets are attractive aluminum boat hardware, and mount anywhere on flat or curved surfaces. Jim Comeau
|
|
|
"Fish N Mate" Aluminum 6 Rod Holder
Used aluminum rod rack that holds 6 rods. Very good shape. No pitting or oxidation. Kept inside. Mounts with 4 bolts or screws, Will only ship to addresses in lower 48 USA. Good luck with your bidding.
|
|
|
Vintage cup holder for boat. Bar Bouy.
Nice old boat/cup holder. Make says Bar Buoy. Great for tiki bar or just as a collectible. Good Luck
|
|
|
VINTAGE,WODEN,HAND,CARVED,FIGURAL,FISH,FISHING,ROD,HOLDER,HANGING,PLAQUE,ART,
VINTAGE.WODEN,HAND,CARVED,FIGURAL,FISH,FISHING,ROD,HOLDER,HANGING,PLAQUE,ART, This wooden hand carved fish hanging wall fishing rod holder display wall art plaque that measures approx. 17 1/2" long Please inspect all photos above as this is the item you will be receiving and be sure to ask all questions before bidding. As with any previously or pre-owned item there may be signs of wear and use. Payment is due within 5 days of auctions close. Shipping quote is for lower 48 only all others including AK HI AND Puerto Rico must contact before bidding/paying for postage as items with wrong postage paid will not ship. Thanks for looking/bidding
|
|
|
Smitty's Long Range Series Fish Fighting Belt
Model is Smitty's"Long Range Series" Fighting Belt. It was used just once lightly. Smittys is one of the top names in fish fighting belts and harnesses. You wont find this at a lower price online or anywhere else! No Tax!
|
|
|
Down East Sportcraft Fishing Rod Holder Single Clamp, Excellent Condition
Down East Sportcraft Fishing Rod Holder Single Clamp. Excellent Condition Down East Sportcraft(Lewiston. Maine) rod holder. Clamp has two clamping holes. Holder appears unused. Scroll Down for Photos Thanks for viewing my auction! I describe my items honestly and as completely as my knowledge of the item allows. I do not omit anything that I notice about any item. The photos in this listing are of the actual item you will receive- I do not use substitute photos. This is an auction and all sales are final. If you are dissatisfied with your purchase. Leaving me poor feedback without contacting me will not resolve the problem but if you contact me before leaving feedback, we will work it out to your satisfaction. Please feel free to ask any questions before you bid, I will respond soon as I can. I use USPS for shipping which I do every business ... moreday. All items shipped to the USA will have delivery confirmation and you will receive an email with the tracking number when I ship. Always glad to combine shipping when practical. Items with free shipping cannot be combined with any other items. Items which sell for over $50 will have insurance added at my expense. I obtain most of my items at thrift stores, yard sales and auctions and I use both new and recycled stuff of all kinds for packing and cannot say what any of my items or packing materials may have been exposed to before I get them. 6.75% Sales Tax is collected for shipments to Ohio addresses. My country exclusion list is based on recommendations from Auctiva, not any personal bias. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14747bc2e47-0x10a-
|
|
|
Vintage Flambeau Adventurer Brown Plastic Telescoping Fishing Rod Holder 38-72"
~~~Vintage Flambeau Adventurer Brown Plastic Telescoping Fishing Rod Holder 38-72"~~~ Shows scuffs and scratches from prior use and being plastic but overall a decent rod carrier! Measures 3" wide x 38-72" long- telescoping! See photos for condition and quality1 Tough durable unbendable plastic carrier! Thanks for looking!
|
|
|
will ship MATCHING PAIR OF FISHING ROD/POLE HOLDERS
I WILL SHIP! I WILL SHIP! I AM AT MICHIGAN 49326 FOR PICK UP HERE IS A VERY NICE. LIGHTLY USED FISHING POLE/ROD HOLDER PAIR. EACH ARE IN NICE CONDITION AND READY TO USE. THIS CAN BE YOURS AS IT WILL SELL TO THE HIGHEST BIDDER WITH NO RESERVE. I DO NOT HAVE A SET PRICE FOR SHIPPING BECAUSE I DO NOT WANT TO CHARGE A BUYER IN OHIO AS A BUYER IN CALIFORNIA. I CAN GIVE ESTIMATES ON SHIPPING IF YOU GIVE ME YOUR ZIP CODE. PLEASE DO NOT PAY FOR ITEM UNTIL YOU RECEIVE AN INVOICE WITH THE SHIPPING INCLUDED.
|
|
|
Vintage Leather Fishing Rod Holder-george Lawrence Co.
We are offering this vintage leather fishing rod holder made by the George Lawrence Company of Portland. Oregon. Considering its age it is in beautiful condition. There is some wear and the leather is cracking slightly in a few places especially around the buckle holes and at one of the straps due to age and wear. It is fully intact and completely functional. Reason to buy: This one is for the dedicated fisherman who thought he had everything until seeing this classic beauty.
|
|
|
Stainless Steel Rod Holder Wall Mounts -Set Of 2
Stainless Steel Wall Mount Rod Holders. Set of 2- used- 4 1/2 inches $20 for set;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14747bc2ef0-0x111-
|
|
|
Wheeleez tuff tires 26 for kayak carts foam filled never flat 3/4 in bore
This auction is for a pair of WHEELEEZ lightly used great condition
|
|
|
Lot Of 3 Preowned Driftmaster Fishing Rod Holders with Mounts
Used these 3 Driftmaster Rod Holders on a pontoon boat. They can be mounted to rails. As I did, or mounted to a flat surface. 2 are 11 inches tall and 1 is 8 inches tall with an upward tilt. All have 3/8" shanks and are in good condition- ready for catching fish! Thanks for your bids, and feel free to e-mail me with any questions.
|
|
|
USED MOUNT ROD HOLDER (ITEM 2947)
USED STEEL MOUNT ROD HOLDER OVERALL LENGTH 9" X O.D. 2" DOES NOT COME WITH ANY MOUNTING HARDWARE OTHER THAN THE SIDE MOUNTS SHOWN
|
|
|
USED FLUSH MOUNT ROD HOLDER (ITEM 2945)
USED STAINLESS STEEL FLUSH MOUNT ROD HOLDERS OVERALL LENGTH 11 1/4" X O.D. 2" HAS 3 MOUNTING SCREW HOLES
|
|
|
S-14 Down East Salty Rail Mounted Fishing Rod Holder
S-14 Down East Salty Rail Mounted Fishing Rod Holder
|
|
|
Good Luck Horseshoe Fishing Rod Holder - Lucky Fish Rod Rack - Key Rack
This is a very interesting piece. it says"Lucky Rod Rack" and features a trout like fish over a lucky horseshoe with three hooks. Despite the claim of a rod rack. This rack would be much more suited to hold keys as it is only 7" long. It is cast of some type of metal and is in nice shape. Just an interesting item for the fisherman.
|
|
|
Vintage Red Metal Adjustable Fishing Pole Rod Holder Boat Clamp Hands Free
vintage fishing rod holder good condition
|
|
|
Four Boat Fishing Rod Holders - Recess Mount - Vintage
This set was from a 1969 Thunderbird Tri-hull. The tubes are 2" wide and mounting depth is approximately 12 inches. These are heavy duty and have withstood time and the elements. I think these were originally chrome on top. But have aged to a nice patina(at least I think so) Tops can be refinished or left as-is. All have the stop pin at the bottom of the tube. These appear to have a 30 degree offset to mounting plane and will include the original screws from removal.
|
|
|
VINTAGE FISHING ROD REST BAMBOO WITH BRASS SPIKE AND TOP
VINTAGE FISHING ROD REST BAMBOO WITH BRASS SPIKE AND TOP REMOVABLE SCREW REST 36" LONG
|
|
|
Vintage Red Metal Adjustable Fishing Pole Rod Holder Hands Free Clamps to Deck
Red Fishing Pole Holder Clamps onto Deck or Boat it Keeps you Hands Free! I've used it maybe twice has just been sitting around See all pictures for details Great original condition. All vintage items are pre-owned and pre-loved therefore showing signs of use and age unless described as Mint condition. Thank you for considering our items! This item was purchased from an Estate Sale. Auction or personal purchase. I do my best to describe items accurately and honestly and to point out any possible damage or flaws. Any mistake in the description is unintentional and not intended to be misleading. I am not an expert of most things that I sell. Please contact me immediately for returns or problems BEFORE you leave feedback. I want to ensure that you're happy! Pre-approved items must be returned within 14 days of the item's receipt. ... moreThe item must be returned in the same condition as when shipped. Smoke free home! PAYMENTS: PayPal Payments Only. If the sale is NOT a Buy It Now with immediate payment required. Payment is to be received within 4 days after close of the sale. Shipping: We will gladly combine shipping on multiple items in order to give you a better shipping rate. When you are done shopping. And- BEFORE YOU PAY e-mail us for a combined invoice. If you pay first. We can no longer refund excess shipping charges. Will ship to the continental United States only! For orders shipping to Hawaii or Alaska. Please contact me to find out the extra shipping cost.
|
|
|
RARE ANTIQUE LAZY FISHING ROD HOLDER CLAMP ON ADJUSTABLE INDIANA USA MADE 1930's
Up for bids is an ultra rare fishing rod holder! It belonged to my great great uncle. And he used it on many of his Northern California fishing trips on the Klamath River. It was manufactured by the Kelgie Manufacturing Company of Fairmount Indiana. It was patented on May 27th 1930. And was invented by Mr. Glen Gift. Pulling up on the holder allows you to slide into the holder rods of differing thickness. The C clamp on the side adjusts so you can clamp it to the side of a boat. Also allowing for differing thickness. A wing nut allows the pole to be tilted at different angles. A very interesting and unique invention. The complete piece is about 9 inches long from the bottom of the C clamp to the end of the holder piece. The holder holds rods that are about 1 inch in diameter. The holder itself is 3 1/2 inches long. The clamp opens to about ... more2 inches. A great piece to use. Or display a vintage fishing rod. Enjoy!
|
|
|
SCOTTY Fishing Rod Holder w/ Mount Kayak Boat Black EUC Baitcaster Rod Pole
SCOTTY Fishing Rod Holder w/ Mount Kayak Boat Black EUC Baitcaster Rod Pole PayPal only. Continental US customers only– 48 States Only. All sales final and as is. No returns accepted. All payments are due within 2 days of end of auction. If an item remains unpaid for 3 days beyond the end of auction. With no communication from the buyer, an unpaid items case will be initiated automatically. Contact me if you have any questions on the listed item. Thank You! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1474d228b19-0x113-
|
|
|
Vintage rod holder for small boat 50's or 60's circa
Nice old rod holder from a small boat. Looks to be 50-60's era. Great wall hanger or nice to put a vintage rod in. Great shape. Light wear. Sorry, but shipping is $8.00 due to it's weight. Good Luck.
|
|
|
2 Tite-Lok Clamp on Rod Holders Plus Clamp on Batt. Nav. Light - NICE!!
2 Tite-Lok clamp on metal rod holders and a battery operated bow navigation light in excellent condition. Rod holders have adjustable clamps to attach to the gunwale of the boat- a wooden spacer is attached to each holder for quick and easy mounting. Holder is fully adjustable and has a rubberized coating to protect the rod. These holders are specifically designed for smaller aluminum fishing boats and are built to last. Tha bow navigation light is also a clamp type and faces in the same direction as the clamp(see photo) It is not adjustable. Green/red lens. Bulb works. Light takes 2 D-size batteries(not included) These holders are great for hands free trolling and still fishing. bidding starts at $30. Packaging and shipping is $12 in the lower 48, payment within 3 days of auction end. Guaranteed as described. Please check my feedback and ... morebid with confidence- Thanks!
|
|
|
Elite V Fishing Rod Holders by Hitekstuff
Purchased these last year for crappie fishing but don't have time to fish. This auction is for two hitekstuff"four rod" holders with mounting plates. Hi-Tek Rod Holders are all aluminum construction and allow for rod tip adjustment both vertically and horizontally. This allows you to position your rod tip exactly where you need it to be. With the use of a wrench. Loosen one bolt to adjust each individual holder to the exact position you need and then tighten the bolt and get ready for the fishing action. Individual holders slide anywhere along the t-bar and they can be spaced to meet your own personal preference. The t-bar will rotate 360 degrees on top of the riser post but can be tightened so that it will not turn. The mounting plate is mounted in the floor of the boat and has female dovetail cut into it. The riser post has ... morea male dovetail allowing it to slide in the mounting plate. Tighten one bolt and it is ready for fishing. Loosen the one bolt and it is ready to remove.It is that simple! You will absolutley love this set up. New. These cost $88 EACH PLUS SHIPPING. Go to the manufactuer's website to learn more.
|
|
|
Two Chrome fishing rod holders, Stainless, Recessed,Free Shipping. Flushmount
two decent chrome recessed fishing rod holders. removed from boat to make room for downrigger mounts. free shipping. new ones cost 79.00 to 109.00 each plus tax and shipping
|
|
|
Set of 2 Perko Clamp on Rod Holders
These are used and in good condition. I will shine them up before they ship Chrome plated zinc alloy with polished stainless steel tube. Hard black plastic liner. Clamp-on feature eliminates drilling rail and simplifies relocation. Mounts on vertical or horizontal rails. 7/8" to 1" diameter and 3/4" diameter by reducing mounting bolt length. Size 9" L x 1-5/8" ID x 2" OD Material Chrome Zinc/Stainless No returns and no international shipping. FREE SHIP.
|
|
|
2 Fish-On Adjustable Fishing Rod Holder Great Condition With Base
Up for auction is a pair of Fish On rod holders with bases. They are in great shape and work perfectly. One of the bases I think is a Roberts brand. But the Fish On hold fits into it perfect. Good Luck!
|
|
|
Tote Um Pole Fishing Rod Carrier
Tote-Um Pole Fishing Rod Carrier- Used. Approx. 37" L. Ends measure about 7" x 7" Terms and Conditions of Sale Payment Payment shall be made within seven days of the close of the auction. We accept all major credit cards through PayPal. If you can not complete the payment within seven days. Please send an email detailing your expected payment date. Shipping The buyer is responsible for the shipping and handling costs of all purchases. Local pick-up always welcome. Local pick-up requires the addition of 5.5% Wisconsin Sales Tax. International buyers. Please include a telephone number for shipping contact. Return Policy We strive to describe the condition of all items in our listings. If an error has been made. An email must be sent within fourteen days of receipt of the item describing the error. No item may be returned without ... moreprior written authorization. Return shipping charges are the responsibility of the party returning the item. Warranty Except as expressly set forth in the item description. Seller makes NO EXPRESS OR IMPLIED warranties of any kind whatsoever about this merchandise. Seller is not responsible for consequential. Incidental or punitive damages of any kind whatsoever. Seller's liability is limited to the amount paid by the Buyer including shipping/handling charges. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
sea sucker boat pole holder
Sea sucker boat fishing pole holder.this is a suction cup mount so there's no drilling anywhere.add a pole holder anywhere on your boat.this item is used in perfect working condition.paypal only.shipping $ 8.00 to USA only.buyer must pay within 24 hours of buying this item or I will realist it.please do not buy if your not going to pay.
|
|
|
Vintage Red Fishing Rod or Pole Holder Metal Stake River Bank
This is a nice fishing pole holder/stake
|
|
|
10 driftmaster1/2 duo rod holders
10 driftmaster 1/2 duo rod holders with bases
|
|
|
SOLAR STAINLESS 3 ROD ADJUSTABLE FRONT/BACK BUZZER BARS+GOAL POSTS-POZI-LOC/BUZZ
SOLAR STAINLESS BUZZER BARS FOR 3 RODS Front& rear- 10-16" 9-15" Pozi-loc posts for perfect rest/alarm alignment. Knurled& slotted adjustment thumbscrews. Includes 3 goalpost adaptors IN GOOD USED CONDITION Please study the photos to see exactly what you are bidding on and check out my for more Solar and Nash stainless. As postage combined where possible. NO BUY IT NOW- I REQUIRE PAYMENT/COLLECTION WITHIN 5 DAYS. Payment by Paypal. Bank transfer, cheque or cash if collecting in person. Collection welcome from GU23 Surrey( 5min from Jcn10 M25/A3) INTERNATIONAL BIDDERS- PAYMENT BY PAYPAL ONLY
|
|
|
2 FISHING ROD HOLDERS PRE-OWNED BLACK
WOW! 2 PRE-OWNED RODS HOLDERS. THEY WORK WELL. A MUST FOR FISHERMAN CAN MOUNT ON A BOAT OR A DOCK. THANKS FOR YOUR SUPPORT. AND BID NOW.
|
|
|
BERKLEY BOAT ROD HOLDER FLUSH MOUNT SET OF 3
out of estate were in basement- mounts are all new took out of packages myself not sue if holders ever used included is 1 sidemount mount thx for looking
|
|
|
(2) Attwood Heavy Duty Adjustable Rod Holder with only (1) Mount
New ergonomic design and easy to find rapid release latch mechanism Large. Easy-grip lock-nut offers easy adjustment 180-degree vertical adjustment range for a variety of rod tip height settings Can be used with casting rods and spinning rods
|
|
|
2 STAINLESS STEEL 30 DEGREE FISHING ROD HOLDERS SURFACE/DECK MOUNT WITH INSERTS
I could not find a brand name or country of origin on these but they are heavy duty and very nice. There is very minor indication that they have been used. The inside diameter of the plastic insert is 1.5" The tubes are 2" outside. These require 8" of clearance below the deck surface. Minimum surface mount area required is 3 1/4" x 4 1/8" and they are 1/4" thick on the deck surface. They hold a rod at 30 degrees angle. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1475dba87bf-0x117-
|
|
|
two (2)DOWN EAST long line trolling fishing pole holders mountable all metal
here are 2 Down East sports craft long line rod holsters they are vintage and awesome fully adjustable and all metal been dependable for us for years and for many more years to come any questions feel free to ask me thank you!
|
|
|
Field & Stream Fishing Rod Reel Pole Wooden Horizontal Wall Storage Rack Holder
Complete the functional style of your trophy room by hanging the Field& Stream 6-Rod Horizontal Wall Rack next to your biggest catch. This rod rack easily mounts to wood walls or walls with 16" center studs. Great for any lodge wall. It holds up to 6 fishing rods with reels and is a space saver at only 3" wide and 24" tall. Features: Holds up to 6 fishing rods with reels Dimensions: 3" x 24" Felt-lined cutouts prevent scratching of rods Includes 4 mounting screws Easily mounts to wood walls or walls with 16" center studs Model: FEH00127 Item is previously used and in good condition. But may have marks from normal use. See photos for details. Last photo is a stock photo to show how it is hung and displayed. Comes from a smoke-free and pet-free home. Item will include a tracking number when shipped. All sales ... morefinal. Thanks for looking and happy bidding!
|
|
|
Down-Easter D-10 DeLuxe Fishing Rod Holder Single Clamp Mod USA
Down-Easter D-10 DeLuxe Fishing Rod Holder. Single Clamp, Mod USA Made in Lewiston. Maine. It is in a very good pre-owned condition. With original box and instructions. California residents to pay sales ta x. Our items come f rom a"Smoke Free Home" P lease as k questions. We will do our best to answer them and descri be our items accurately. Please let u s know if there is a problem. We want you to be happy. A joyful heart is good medicine. Proverbs 17:22
|
|
|
(4)Rupp Gunnel Mount Rod Holders
Four used gunnel mounted rod holders manufactured by Rupp. These are heavy duty. Quality rod holders. A little rough in appearance but functionaly perfect. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Stainless Steal Railmount Rod Holders ( 2)
Pair of spring loaded rail mount rod holders in very good condition(like new) name brand is Dou Bro. You get both the rod holders in the pics(boat not included)
|
|
|
4 scotty power lock black rod pole holders boats fishing trolling tackle acc.
4 scotty power lock rod holders theres no mounting bases cabelas bases will fit shipping US $13.00
|
|
|
Shimano Sahara FE Series Spinning Reels
Item is used. But still in a very good condition Top-drawer performance at a modest price, Lightweight but strong construction, Graphite frame/rotor/sideplate, Four-bearing system, Shimano Sahara FE Series Spinning Reels debut a distinctive look while delivering enhanced. Top-drawer performance at a modest price point. Lightweight but impressively strong, Sahara FE Series Reels sport a graphite frame, rotor, and sideplate for a weight savings you'll feel in an instant. Sahara FE Series Spinning Reels feature a smooth, four-bearing system that's more than a match for that larger-than-life trophy you may encounter. Return Policy We offer a 14 day return policy. However. All items purchased must be returned in the same condition as they were received. Buyer pays shipping supreme. Supremewidgets. Supremeauctiononlinesoftware.widgets.EbayGalleryZ.swf. ... moreSupremewidgets. Supremeauctiononlinesoftware.widgets.GalleryBasic.swf. Supremewidgets. Supremeauctiononlinesoftware.widgets.FeedbackWidgetBasic.swf.
|
|
|
Homemade White PVC Pipe Fishing Rod Holder Storage w/Cap Lid~Heavy Duty~59"
Welcome to the Wonderful World of G r o o v y w a t c h a m a c a l l i t! Homemade White PVC Pipe Fishing Rod Holder Storage w/Cap Lid~Heavy Duty~59" Storage for your fishing rod. It has been used and has some scuff/scratch/black marks on it. Please see pictures. 59" long 6" diameter We ALWAYS Combine Shipping Charges To Save Our Customers $$$* Please let us know if you would like specific pictures or more information. Thank you for looking and bidding. We handle. Pack, and ship with care, speed, and FREE delivery confirmation. To reduce your shipping costs. We gladly combine shipping charges when you win multiple auctions. Please visit our Ebay Store Please sign up for our FREE E-newsletter ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14765cfc8bb-0x116-
|
|
|
Fishing Rod Rests (Pair of) - Excellent Condition! Bargain!
Fishing Rod Rests(Pair of) Excellent Condition! Bargain! Both fit on a universal threaded post/ pole Large one is 19cm across. Small one 14cm
|
|
|
CANNON UNI-TROLL 6 DOWNRIGGER S & K PRODUCTS
YOU ARE BIDDING ON A CANNON BRAND UNI-TROLL 6 DOWNRIGGER FROM AN ESTATE IN LYNCHBURG VIRGINIA. THE UNIT SEEMS TO BE WORKING PROPERLY HOWEVER THERE IS A CRACK IN THE CENTER OF THE CABLE REEL WHICH IS SHOWN IN ONE OF THE PICTURES. PLEASE SEE ALL THE PICTURES AND EMAIL WITH ANY QUESTIONS BEFORE BIDDING. WE ONLY SHIP TO THE LOWER 48 UNITED STATES. THANK YOU FOR LOOKING NAD GOOD LUCK.
|
|
|
FISHING ROD HOLDER 1 1/4" DOUBLE CLAMPS - DOWN EAST SPORTSCRAFT ?
FISHING ROD HOLDER 1 1/4" DOUBLE CLAMPS- DOWN EAST SPORTSCRAFT? UP FOR AUCTION IS A FISHING ROD HOLDER 1 1/4" DOUBLE CLAMPS. IT LOOKS IDENTICLE TO A DOWN EAST SPORTSCRAFT ROD HOLDER BUT I DO NOT SEE ANY MARKINGS. IT IS IN VERY GOOD CONDITION.
|
|
|
lot of 3 Down East Salty S-10 Fishing Rod Holders
You are buying one lot containing 2 down east salty rod holders in box. 1 down east salty mount assembly and 1 heavy duty rod holder that has no markings but I believe it is a salty. these really are great items to have on your fishing boat! thanks for looking and feel free to ask questions.
|
|
|
Vintage George Lawrence Leather Fishing Rod Holder Big Game Fishing Belt W/Knife
Normal 0 false false false EN-US X-NONE X-NONE This is a vintage George Lawrence Leather Fishing Rod Holder made in Portland. Oregon, and knife with sheath. I am not sure if the sheath was made for this fishing rod holder or not but I could see no way to remove it from the strap as the buckle is bigger than the loop on the sheath. Considering its age it is in great shape. There is some cracking in the belt so it could use some tlc and some needs-foot oil. I do not image that this is anything but a fantastic show piece. The knife blade has surface rust. But could probably be cleaned up and usable. The knife is well made but had no manufacturer mark. Check out my other items. I pulled a beautiful German made needle-nose pliers with sheath off of this belt as well as a small multi-tool. Thanks!
|
|
|
VINTAGE MINSER TACKLE CO. FISHING POLE ROD HOLDER - 2 POSITION
VINTAGE MINSER TACKLE CO. ROD HOLDER A METAL ROD HOLDER WITH 2-POSITIONS IN GOOD VINTAGE CONDITION WITH BOTH THUMB SCREWS IT IS MISSING ONE RUBBER PART MEASURES ABOUT 12" WIDE X 15" HIGH WITH BOTTOM THUMB SCREW FULLY CLOSED MADE IN SEATTLE. WASHINGTON THANKS FOR LOOKING.
|
|
|
3 Adjustable Fishing Rod Holders w/ Bases
Offered here are three(3) 9 ½” long adjustable rod holders. Each has a 4-screw base. The up/down angle is adjusted by loosening the white knob. The direction is adjusted by lifting from the base. Turning and re-inserting. These units are veterans with scuffs and scratches as shown but remain entirely functional. Please note that the lock rings for the end tips are missing(many people. Me included, never use them anyway) Any questions? Please ask before bidding. Combined shipping is available for most items. All items are shipped the same or next business day. If practical. The shipping tab will show shipping options. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Fenwick Fishing Rod Case & Cloth Sleeve ~ Aluminum ~ Case Only
Inside the sleeve are 3 pieces of a rod. Maybe Fenwick, but one has a broken tip. It is not a complete rod and I am putting no value on it. The case is in very good condition as is the sleeve. The case measures 25" in height and is 2 3/4" in diameter. Thank you for looking.
|
|
|
BERKLY HORIZONTAL ROD RACKS LOT OF TWO PAIR EACH HOLDS SIX RODS
Two Bekley horizontal rod racks. Each rack holds six rods. They were used very briefly. There is no signifigant wear to the foam portion. The plastic frames have a few very light scuffs. Buyer will need to provide the mounting screws(8)
|
|
|
Vintage Fishing Pole Rod Butt Holder.,- Leather - Waist - Belt ,pole rest
opens to 42 inch waist. i bought this used in flea market about 30 years ago.looked like antique then. 6 inches wide weights just over 2 lb.
|
|
|
Surf Fishing Rod Holder 24X"48"
Custom made Surf Fishing Rod Holder. Holds up to 4 poles in transit. 2 angle mounts for rigging and setup. Bucket holder on left side. Aluminum construction. Requires mounting receiver style tubes in frame or each side of vehicle. Can be installed by a single person, light weight. 48" wide, 24" deep. Holds coolers, chairs, tackle, shovels or what ever else needs to be transported. Note: vehicle not included! I've have did this rig mounted on my Jeep, Durango, Bravada and F150, it's a universal fitment.
|
|
|
* Vintage Fenwick Brown Hard Side / Flip Top Fishing Rod Pole Case
Vintage Fenwick Brown Hard Side/ Flip Top Fishing Rod Pole Case Approx. 36 1/2 inch in length. Thank you. No returns. Payments accepted within 48 hours through Paypal. Ships only in the continental U.S. Alaska& Hawaii excluded) No international.
|
|
|
Triple Mount Multi-Set Fishing Rod Holders, for Boat
Triple Cabelas Mount Rod Holder 2 Are Quick Draw and 1 Is a Lock in Rod Mounting Bracket Mount Two Ways Lightly Used
|
|
|
GENUINE TEMPRESS FISH-ON POLE/ROD HOLDER FISHING
GENUINE TEMPRESS FISH-ON POLE/ROD HOLDER FISHING- see photos- in good used condition but does show wear from use. No mounting plate included.
|
|
|
Down East Sportscraft Fishing Rod Holder Lewiston Maine for Canoes & Boats
Here is a Down East Sportscraft Fishing Rod Holder Lewiston Maine Double Clamp Rod holder works great on canoes& boats. Clamps open to 1.5" Great Conduction-Over All: 9" x 4" Returns accepted. Pay within 3 days. Shipping to continental USA only. Other locations please email me. International buyers please email me for shipping cost before bidding.
|
|
|
1990 sea ox blue water pro fishing boat
1990 sea ox blue water pro fishing boat bot had twin engines now only one and has been sitting for a few yrs now this is a buy as is deal and will not ship but will provide numbers of haulers
|
|
|
2 Perko Clamp On Stainless Steel/ Zinc Plated Rod Holders
2 Used(stainless steel tube/ chrome zinc plated clamps) Perko clamp on rod holders. Holders can be adjusted horizontally or vertically and fit 3/4" to 1" rails.
|
|
|
PAIR OF SOLAR STAINLESS 3 ROD ADJUSTABLE BUZZER BARS+GOAL POST ADAPTERS x2 /BUZZ
SOLAR STAINLESS BUZZER BARS FOR 3 RODS Matching pair. Adjustable 9.5-16 inches + 2 x optional goal post adapters Quality stainless steel construction with knurled& slotted thumbscrews. IN GOOD USED CONDITION Please study the photos to see exactly what you are bidding on and check out my for more Solar and Nash stainless. As postage combined where possible. NO BUY IT NOW- I REQUIRE PAYMENT/COLLECTION WITHIN 5 DAYS. Payment by Paypal. Bank transfer, cheque or cash if collecting in person. Collection welcome from GU23 Surrey( 5min from Jcn10 M25/A3) INTERNATIONAL BIDDERS- PAYMENT BY PAYPAL ONLY
|
|
|
Roberts by Attwood heavy duty adjustable fishing rod holder for boats
You are bidding on a Roberts by Attwood heavy duty adjustable fishing rod holder for boats. This rod holder is used but in good condition. I think it may be missing a piece that locks the rods into place. But it will still hold the rods with out it. It came on a boat that I bought. But I do not use it, so I want it to go to someone who will put it to good use.
|
|
|
vtg adjustable aluminum Rod Holder swivel style for the pier deck dock VG+
vtg adjustable aluminum Rod Holder swivel style for the pier deck dock VG+ Definitely a quality accessory. This one is vintage and in great condition. Never bent or abused, nice and clean. I am just making it through the winters purchases of fishing. Hiking, camping, hunting gear. Most of it is vintage/old but it runs all the way to new, and its in many different categories. And there is a bit more in the pipeline, too. USA Bidders- Immediate payment. Please. And that assures that your package will be promptly on its way. This is a huge help and we greatly appreciate your cooperation. We use USPS(note the significant 2014 rate increases) and FedEx(for heavier objects) We always do a genuinely better-than-necessary job packing( one less concern) and with top-quality packing materials. After payment is received WE ALWAYS SHIP'NEXT DAY' ... moreanother non-concern) International Bidders- NEW shipping alternatives- Review THOROUGHLY! For SMALL or LIGHTWEIGHT items that will physically fit into a USPS"International Flat Rate Legal Size Envelope" 9"x15" heavy paper envelope with maximum weight limit of 4 pounds; items are professionally and carefully wrapped and/or boxed first and then placed inside the envelope) we offer"Flat Rate Shipping" for $26.50(to Canada $22.50) Again. Only small or lightweight objects qualify for this rate. For LARGER or HEAVIER items that do not qualify for the first alternative WE ONLY OFFER pre-approved USPS International Priority Mail Rate"Calculated Shipping" using your location and actual packaged weight) by contacting us before bidding for an accurate quote(and allowing us to add you to our pre-approved bidder list) OR- eBay's"Global Shipping Program" Feel free to ask us any questions. Please WAIT FOR AN INVOICE! It will have the correct option choosen. Please Note: Import duties. Taxes and charges are not included in the item or shipping charges. These charges are the buyer's responsibility. Check with your country's customs
|
|
|
2 Tite-Lok Adjustable Fishing Rod Holders (trolling downrigger pole lock)
These two(2) aluminum Tite-Lok rod holders are used but clean and in good working condition. They have some light scuffs and scars as shown but remain fully functional. They are 13 ½” tall and 1 5/8” diameter. They are adjustable to any direction or angle. Any questions? Please ask before bidding. Combined shipping is available for most items. All items are shipped the same or next business day. If practical. The shipping tab will show shipping options. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Butterwick's E-Z-Fish Wooden Fishing Rod Pole Holder
Fishing rod holder. Looks to be in very good shape, but has a couple of tape marks and light scratches on back side. It is about 15 inches long when it lays flat, could probably be tucked in to most tackle boxes. Thanks for looking! U.S. buyers only Check out my& be sure to add me to your!
|
|
|
Shimano Fishing rod strap holder
You are bidding on 4 Shimano fishing rod strap folders. All are in like new condition. Great for organizing your fishing rods. Will not be disappointed. Fish on.
|
|
|
4 Perko Rod Holders, Stainless Steel Rail Mount
4 Used. BUT LIKE NEW, Perko Stainless Steel, Highly Polished, Rail mount Rod Holders. Purchased 2 years ago, installed on a boat but NEVER had a Fishing Rod inserted into them. These Rod Holder sell for over $70 retail each. Buy-it-Now and I'll include FREE Shipping
|
|
|
27' VIP WALK AROUND fishing boat
Great fishing boat with twin Yamaha 150's. Handles rough seas with ease and gives a very dry ride. Stand up head, stove, microwave, sink, v berth and aft cabin. This boat has a lot of room for a walk around. Normal wear for a boat of this age. Selling to upgrade to a bigger boat.
|
|
|
4 Roberts by Attwood Heavy Duty Fishing Rod Holders with Mounts
4 Heavy Duty Adjustable Roberts by Attwood Fishing Rod Holders With Rotating Rod Lock& 4 Attwood Side Mount Bases.
|
|
|
Roberts by Attwood Fishing Rod Rail Mount
Roberts by Attwood Rail Mount Rod Holder. Great For Boats with Limited Mounting Surfaces: No Holes to Drill. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14780b42888-0x112-
|
|
|
CHROME ROD HOLDER FOR FISHING DOWN RIGGER
CHROME ROD HOLDER FOR FISHING DOWN RIGGER inkfrog terapeak. I000000. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14780b42852-0x106-
|
|
|
Roberts by Attwood Fishing Rod Holder With Side Mount - White - Nice!
Lightly used- Michigan estate sale find. Roberts By Attwood adjustable fishing rod holder with side mount(mounting hardware not included. Very nice condition! Aside from a few very small marks on the white and a little dirt. It looks almost unused. Therefore. I try to describe items as best as I can for you. Some details may be more important to some of you. If I have not included specific details about this item that you need to make an informed decision before you buy, I encourage you to please ask me and I will do my best to provide the details you need. I am happy to combine shipping of items purchased within 3 days of the first item. If you want to combine shipping. Please and wait to receive an invoice from me before paying. If there is an auction item you are interested in that does not fit into the 3 day rule. Please contact me to ... morerequest an extension. Often combined shipping allows us to give you a discount. Check out my! I am a proud and current member of NFLCC.
|
|
|
Porta-Bote, Minn Kota Trolling Motor & Hummingbird Fish Finder
2013 10' Porta-Bote w/ Alpha Folding Transom. Minn Kota Endura C2 Trolling Motor& Marine Battery. Hummingbird Piranhamax 175 Fish Finder. Boat has 3 seats w/2 Swivel Chairs. Oars& Locks, Porta-Dolly. Boat folds flat to 4" sets up w/no tools in minutes. Boat's empty weight is 78 pounds& can carry 3 people/ 585 pounds. Original purchase cost of all items was $2565. Boat is in excellent condition with some minor scrapes on bottom. All items were purchased in 2013. We're full time RV'ers. Have downsized and now travel and volunteer at campgrounds
|
|
|
Perko Rod Holder Clamp On Clamping Fishing Rod Holder w/ Lip and Liner
Perko Rod Holder Clamp On Clamping Fishing Rod Holder with lip and Liner. Says Perko Cat. Nos: 1118-000-CHR Rod Holder and says 1215-000-STS Rod Holder. Adjustable for rails of 3/4" to 1" in diameter. Says adaptable for 3/4 inch tubing ONLY by changing the bolt length. Tube is 2" Outside Diameter. 9.25" Long. Constructed of chrome plated zinc bracket, with polished stainless steel tube, and hard black plastic liner/ lip. Please email with any questions Thanks and happy bidding Check out my!
|
|
|
Plano Phantom Rod Holder Model 4572
Plano Phantom rod holder model 4572. Rod holder has original labels which are slightly loose but still readable. Holder has no major damage just scuffs and scrapes from normal use. Holder measures 51 1/2" long and 4 3/8" diameter. PAY PAL IS THE ONLY ACCEPTED MEANS FOR PAYMENT. PAYMENT IS EXPECTED WITHIN 72 HOURS FROM CLOSE OF AUCTION. WILL COMBINE SHIPPING ON MULTIPLE PURCHASES. PLEASE. U.S. BIDDERS ONLY.
|
|
|
28 X 5 1/4 White Starboard Under Gunwale Fishing Rod Holder Rack
Originally from a 2004 Bluewater 2350. These will fit any boat with similar dimensions. They can be used horizontally or vertically. Made from starboard so they will last forever. I'm excellent condition. Email with any questions. Will hold 4 rods. This is for both open and closed pieces pictures. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-1478ab8def2-0x10e-
|
|
|
FISHING ROD, POLE, BUTT HOLDER, BIG GAME FISHING
THIS FISHING POLE BUTT HOLDER IS LIGHTLY USED WITH A NYLON ADJUSTABLE STRAP. THE STRAP IS EASILY REMOVED IF REPLACEMENT IS DESIRED. THE STRAP IS IN EXCELLANT CONDITION AND HAS A QUICK RELEASE FASTENER ATTACHED. THE OVERALL LENGTH OF THE STRAP IS 52" THE BUTT PLATE IS HIGH VISABILTY EXTRA HEAVY PLASTIC AND HAS A REMOVABLE BOLT THROUGH THE HOLDER. GREAT FOR BIG GAME FISHING IN FRESH OR SALT WATER. I STRIVE TO DELIVER 5 STAR CUSTOMER SERVICE FOR YOUR 5 STAR RATING. PLEASE BID AND THANK YOU FOR LOOKING.
|
|
|
Fighting Chair Fishing Saltwater Hemingway Wood Rod Reel Bait Pole Lure
Hemingway Style Fighting Chair.Check Photos For Damaged Areas
|
|
|
TWO ROYCE UNION VINTAGE BICYCLE PART FISHING POLE HOLDER BATTERY OPERATED AS IS
WELCOME TO MY AUCTION UP FOR BID IS TWO VINTAGE ROYCE-UNION BICYCLE PART FISHING POLE HOLDERS. AND ARE IN PRE-OWNED CONDITION. THESE HAVE NOT BEEN TESTED AND ARE SOLD AS-IS. YOU WILL GET EXACTLY WHAT YOU SEE IN THE PICTURES. I AM STARTING THE BID VERY LOW, AND THERE IS NO RESERVE PRICE. IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL ME IN MY EBAY MESSAGES AND I WILL BE HAPPY TO ASSIST YOU. THANK YOU AND GOOD LUCK. PLEASE CHECK MY OTHER ITEMS I HAVE GOING ON SALE NOW. JUST CLICK THE"LINK BELOW" AND IT WILL TAKE YOU THERE. THANK YOU. See other items.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1478fce0036-0x113-
|
|
|
Plano Protect A Rod Travel Case Model 4102
Plano Protect A Rod Travel Case Model 4102 This case is in good condition. It has some scratches. 63.5 in in length Non Collapsible/Rigid Collar Telescopic extends 60 to 120in in 6 in increments Lockable end cap Pads top and bottom Hand carrying strap Accepts up to 8.5 one piece rod End loading Anchors for shoulder strap Thanks for looking. Feel free to email with any questions.
|
|
|
Pair of Big Jon tilting rod holders; spring-loaded
Pair of Big Jon tilting rod holders. Only one unit is complete. The other is missing the two rods that form the"T" that the springs attach to. Please see the shipping page for costs to your area. Local pickup OK. PayPal is accepted for payment. Payment at time of local pickup OK. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
2-Vintage 1960-70s Swivel Rod Holder Mount Boat, Pier or Dock Unused Conduction
Here are 2- Vintage Fishing Rod Holder Both Look to be used but in good conduction with no bends or breaks. The blue one has the pad for mounting missing but can still be used. The Swivels Measures: 8.5" where rod sits. Returns accepted. Pay within 3 days. Shipping to Continental USA only. Other locations please email me. International buyers please email me for shipping cost before bidding.
|
|
|
Vintage Antique Brass FISHING ROD HOLDER Totem BARCO Manufacturing Co
You get everything in picture. Email with questions. Will combine shipping! Calculated shipping from 98027 in the US. Insurance is advised. I accept PAYPAL. If payment is not received within 7 days. The item will be relisted. Email if you have any questions. Thanks for your interest! Powered by Posted with the
|
|
|
Berkley 3 Rod Tube Fishing Rod Holders + Mounting Bracket Rail Flush White Boati
This is a Berkley 3 Rod Tube Fishing Rod Holder. It is in used condition. Comes with stainless steel mounting bracket. Can be mounted on rail or flush mounted Please study the pictures carefully for you to help determine the condition. I believe one of the keys to having a successful transaction is good communication. Please contact me if you have any questions. I try very hard to describe the item as completely and as accurately as I can. If you have questions please feel free to ask. If I don't mention a certain part of an item in the description. Don't assume that it is in perfect shape.ask me to be sure. I might not have known enough to provide the right details. A lot of the items I list had been purchase at auctions and estate sales and have been sitting in my garage for a long time and I never had a chance to use, so I may ... morenot have any first hand knowledge of the item. The photo is an accurate representation of the actual item or items in the auction. But please don’t wait till the last day(24 hours) to ask questions for I probably will not be able to return an answer to you in time. Payment must be received within 7 day of auction closing. Unless otherwise stated in the listing. All items sold as is, no warranty expressed or implied. The buyer is responsible for the knowledge and proper use of the item. Any refund will be handled on a case-by-case basis. Please contact me it you have any questions. I usually ship within 24 to 72 hours after receiving payment the exceptions being weekends. Holidays. If you would like additional photos. Just ask, I will send whatever you need. I included insurance on all purchases for your protection and mine. Please note. I am not responsible for the item after I place it in the care of the shipping carrier. I am also not responsible for the time the shipping carrier takes to ship the item. I could only give you the shipping time estimate the carrier gives me. I do combine shipping on multiple items won within 3 days of each other to save on shipping cost when prac
|
|
|
Down East Fishing Rod Holder Standard Series D-10
Downeast D-10 Fishing Rod Holder in great used condition. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14795ebf106-0x10d-
|
|
|
Plano Phantom Expandable Rod Holder Model 4572
Plano Phantom Expandable Rod Holder model 4572. Rod holder has original labels which are slightly loose but still readable. Holder has no major damage just scuffs and scrapes from normal use. Holder measures 51 1/2" long and 4 3/8" diameter when holder is extended it measures 571/2" PAY PAL IS THE ONLY ACCEPTED MEANS FOR PAYMENT. PAYMENT IS EXPECTED WITHIN 72 HOURS FROM CLOSE OF AUCTION. WILL COMBINE SHIPPING ON MULTIPLE PURCHASES. PLEASE. U.S. BIDDERS ONLY. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-147960c54da-0x10b-
|
|
|
Seasucker Boat Rod Holder Suction Cup
The polished aluminum on this single rod holder looks great. And it's got a 6” SeaSucker attached to give you a solid mount for your rod just about anywhere on the boat. Built-in support legs give it torque resistance to help it withstand the pressure of a fish strike. The legs have rubber caps to protect your boat's finish. Footprint: approx. 8 1/2” x 6” Rod holder has a 1 3/4” I.D. and a plastic insert. 10” deep and pinned at the bottom for slotted rod butts. Shipping will be $7.00 to lower 48 states, no international shipping, sorry. Good Luck
|
|
 |