|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: Used Location: Baldwin, United States Free shippingIn nice condition but does have some wear
Buy It Now
$18.00 Shipping Condition: New Location: Nisswa, United States 3 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes 1 LB, 2 LB, 3 LB weights. The mold uses #2 eyelet hooks for the 1 LB weight, and #3 eyelet hooks ... morefor the 2 and 3 LB weights. This mold is precision machined out of 6061 Aluminum, and will last for years!
Buy It Now
$8.70 Shipping Condition: Used Location: Lapeer, United States C. Palmer Mold in Good Used Condition. Dipsy-Doodle Swivel Sinker Mold# 301. Sinker Weights 1/8, 1/4, 3/8, 1/2, 3/4, 1, and 1-1/2 Oz. See photos for addition ... moreinformation. A good user or collectable. Please see photos for condition. Any questions please email. Payment to be received within 7 days of auction end. Most items shipped next day of cleared payment. Satisfaction guaranteed if not satisfied for any reason just return. Thank You.
Buy It Now
Free Shipping Condition: Used Location: Point Pleasant Beach, United States FOR YOUR CONSIDERATION IS A DO-IT CORPORATION MODEL EG-9-A 9 CAVITY EGG SINKER LEAD MOLD. IT MAKES 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1-1/2, 2 AND 3 OZ WEIGHTS. ... moreTHIS MOLD IS USED AND IN GOOD CONDITION, HOWEVER IT IS MISSING THE BRASS PULL ROD. DON'T LET THIS ONE GET AWAY!
$5.45 Shipping Condition: Used Location: Pottstown, United States Please note that I only ship to the lower 48 United States only. No International or AK or HI bidders please. Please check my other auctions this week. ... moreI have a lot more different types of molds posted. I will combine shipping on multiple wins. You are bidding on a Herters Inc Sinker Mold model# 4F2. Mold is in nice used condition with no breaks or cracks. All items sold"as is" Please look at pictures for best description and ask questions before bidding if needed. All items sold"AS-IS" S/H is $7.00. All items sold"AS IS" Please ask questions before bidding if needed. I do combine shipping whenever possible. Please check my other auctions for more great items. Payment is due within 4 days after the end of the auction-Paypal only. Thanks and good luck
Buy It Now
Free Shipping Condition: New Location: Church Hill, United States THIS SALE IS FOR A LOT OF 52 HANDMADE PURE LEAD BANK SINKERS FROM A DO IT MOLD.
Buy It Now
$11.60 Shipping Condition: Used Location: Sarasota, United States HERTERS INC. WASECA MINN. U.S.A. SINKER. JIG MOLDS, MODEL 2-J and 4A4, FISHING ITEMS Powered by The free listing tool. List your items fast and easy and ... moremanage your active items.
$5.95 Shipping Condition: Used Location: Mount Washington, United States This is a Hilts egg sinker mold in excellent condition. Looks like new to me, had some red stain or something on it, I got most of it off, sizes 1/8. ... more1/4, 1/2, 3/4& 1. Ask anything before you bid. Please c heck out my other auctions! I ship at the lowest rate I can. When possible I can use flat rate boxes for multiple items to keep shipping costs down, also I did not add insurance to the shipping cost, if you want it we can add it to your to bill. I will be glad to exchange feedback. Buyer posts first, if your happy post Positive feedback, if not contact me before so we can fix the problem. Pay me securely with any major credit card through PayPal! Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Baltimore, United States Made from durable 6061-T6 aluminum material and CNC machined to precision, this mold is ideal for anglers who want to make their own sinkers. The model ... moreRF-2-1. is designed to create two 1 oz. This mold is a must-have for any serious angler who wants to customize their own sinkers.
Buy It Now
$7.99 Shipping Condition: Used Location: Cleveland, United States Nice Vintage Bell Type Sinker Mold PALMER MFG. West Newton PA, 15089 Model 151.
$3.95 Shipping Condition: New Location: Saint Louis, United States Vintage new in package sinker mold.
Buy It Now
Free Shipping Condition: New Location: Kenai, United States Fishing 2- mold part DIY Carolina rig jig head lead sinker mold Material: aluminum. This fishing sinker mold is a must-have for any angler who wants to ... morecreate their own custom sinkers. Made from high-quality aluminum, this mold is durable and long-lasting.
$10.60 Shipping Condition: Used Location: Goshen, United States This Vintage C. Palmer Sinker Mold 102 allows you to create bank sinkers that are perfect for freshwater fishing. With the different sizes of weights ... moreit produces, you can easily use them for different types of fish. The sinkers are made from lead, which guarantees durability. Get your hands on this reliable sinker mold today!
Buy It Now
Free Shipping Condition: New Location: Rotonda West, United States Lot of 145. I Use pure or soft lead to mold these bendable sinkers. Reusable #4 split shot sinkers 1/8 ounce lot of 105. Condition is "New". I make all ... moretypes of sinkers. 1.5oz no snag sinkers. lot of 50.
Buy It Now
Free Shipping Condition: New Location: Ukraine Round Sinker Mold. 11 Sinker Weight Options. Sinker Shape: Round. Sinker Weights, g: 1 - 1.5 - 2 - 2.5 - 3 - 3.5 - 4 - 4.5 - 5 - 6 - 7 G. Sinker Weights, ... moreoz: 0.035 - 0.247 OZ. Jig Characteristics.
Buy It Now
$8.45 Shipping Condition: Used Location: Newalla, United States Cool old piece for a tacklebox for somebody who likes to make their own weights check it out very neat and would love to try it, but I don’t fish so hope ... moreyou like it and if you have any questions feel feel free to ask. Thanks for looking.
Buy It Now
Free Shipping Condition: New Location: Smithfield, United States Bank Sinker multi cavity molds. Up for your consideration a new aluminum lead casting mold as shown. Cnc machined from 6061-T6 aluminum alloy Phenolic ... morehandles mounted to stainless steel studs. Choose size and cavities.
Buy It Now
Free Shipping Condition: Used Location: Lauderdale, United States You are bidding on a New Old Stock PALMER MFG No.525 aluminum 1/4 oz WORM SLIP SINKER Mold. Please see the photos for condition. The handle still has ... morean intact Davis HArdware(Austin. Texas) price sticker on it. Payment is expected via PayPal within three days of the conclusion of the auction. I only ship to the USA and APO/FPO addresses. Please check my other auctions for more fishing. Militaria, law enforcement and fire department items.
Buy It Now
Free Shipping Condition: New other (see details) Location: Washington Boro, United States BANK SINKERS. all sinkers made from scrap lead with do-it molds. UP TO 20 OUNCES.
$12.90 Shipping Condition: Used Location: Lincoln University, United States 4 MOLDS FOR LEAD POURING. LARGE 10-16 MOLD.
Buy It Now
Free Shipping Condition: New Location: Church Hill, United States FOR YOUR CONSIDERATION IS A LOT OF 50 (4 OZ. ). BANK SINKER MADE BY A DO-IT-MOLD.
$6.23 Shipping Condition: Used Location: Pottstown, United States Used Do-it round head jig mold makes assorted sizes.
Buy It Now
$11.00 Shipping Condition: Used Location: San Antonio, United States VINTAGE PREOWNED CONDITION, HAS WEAR, MISSING BOTH PINS, DISCOUNTED PRICINGThis Reading Instruments Bank Sinker Mold produces 8 oz sinkers and is made ... moreof durable cast iron material. The mold is designed for easy and efficient use, allowing anglers to quickly create their own sinkers without hassle. The sinker mold is missing both pins, however, as seen in the photos provided. This sinker mold is perfect for any angler in need of reliable and customizable sinkers for their fishing needs. Its sturdy construction and easy-to-use design make it a great addition to any tackle box.
Buy It Now
Free Shipping Condition: New Location: Smithfield, United States 16oz = 1lb. Up for your consideration a new aluminum lead casting mold. Cnc machined from 6061-T6 aluminum alloy Phenolic handles mounted to stainless ... moresteel studs. 24oz = 1.5lb. 64oz = 4lb.
Buy It Now
$13.90 Shipping Condition: Used Location: Corona, United States
$8.81 Shipping Condition: Used Location: Oak Lawn, United States 4- do-it lead molds one is new never used.
Buy It Now
Free Shipping Condition: New Location: Church Hill, United States FOR SALE IS A 104 LOT OF 4 OZ. BANK SINKER MADE BY A DO-IT-MOLD.
$6.23 Shipping Condition: Used Location: Pottstown, United States NEW IN STOCK. DO-IT TUBE SKIRT JIG MOLD(TUBE-G) MAKES 1/8. 1/4, 3/8, 1/2, 3/4 OZ JIGS 1 CAVITY EACH. USES EAGLE CLAW JIG HOOKS#570. 575 SIZE 4/0. SAVE ... moreMONEY! HOLDER COLLAR FOR SKIRTS. MAKE YOUR OWN TUBE SKIRT JIGS. USE WITH YOUR FAVORITE TUBES. 1/8 oz. = 3.544 grams. 1/4 oz. = 7.087 grams, 3/8 oz. = 10.631 grams. 1/2 oz. = 14.175 grams. 3/4 oz. = 21.262 grams. DO-IT MOLDS ARE THE FINEST QUALITY AVAILABLE TODAY. International Buyers– Please Note shipping information below*THANKS FOR LOOKING. CHECK OUT OUR EBAY STORE FOR MORE. Be sure to add me to your! GO TO DO-IT MOLDS CATEGORY AND SORT BY HIGHEST PRICE FIRST FOR THE BEST ORDER OF SELECTION*DO-IT MOLDS* USA ONLY* FREE SHIPPING! PAYPAL ONLY. EMAIL THROUGH EBAY ONLY. CALL IF NECESSARY 973-945-8616. WILL SHIP AFTER PAYMENT CLEARS. RETURN UNUSED MOLDS FOR 100% REFUND OF PURCHASE PRICE. NO SHIPPING COSTS REFUNDED. NJ MUST ADD SALES TAX. INTERNATIONAL-PRIORITY ENVELOPE. NO TRACKING OR INSURANCE. PAY SHIPPING PER MOLD, SEE RATES ON SHIPMENT PAGE. CANADA AND MEXICO-SHIPPING RATES SLIGHTLY LESS. SEE RATES ON SHIPMENT PAGE. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: Used Location: Point Pleasant Beach, United States Vintage JIMCO Oval Jig Sinker Mold 3/8 oz. Fishing. This is a vintage Oval Jig Mold from Jimco of West Newton. PA. model#5554J. The mold makes 6 3/8" ... moresinkers for fishing. The device has some wear and a bit of corrosion on the outside but is in good condition in the original box. Items are from a pet free and smoke free home. Because this item is being sold with no reserve the high bidder will own it when the auction ends. Please email me if you have any questions. Thanks. Shipping: Items will be shipped within 3- 5 business days upon receipt of payment. All domestic and international packages will be shipped by the United States Postal Service with delivery confirmation. International packages will receive a customs declaration number. More vintage items are available. Shipping will be combined! Please see my other auctions. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Ukraine Weights mold to produce cheburashka style weights, from 7 to 15 grams. The weights are 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 grams.
Buy It Now
$9.99 Shipping Condition: New other (see details) Location: Lebanon, United States Great vintage mold!Looks to be unused No owner marksWgsf3-3I will combine shipping
$6.23 Shipping Condition: Used Location: Pottstown, United States Makes assorted sizes.
Buy It Now
Free Shipping Condition: New Location: Church Hill, United States FOR YOUR CONSIDERATION IS A LOT OF 50 ( 5 OZ.) HANDMADE LEAD BANK SINKERS FROM A DO IT MOLD. If it’s price and quality that is wanted; I guarantee you ... morewon’t be disappointed!
Buy It Now
Free Shipping Condition: New Location: Granger, United States 100 Qty 1/2 oz Lead Egg Sinkers, Slip Sinkers Weights FREE SHIPPING. Qty 100 Lead Egg SinkersHigh quality Lead pouredMade by DO-IT moldVeteran Owned Business ... moreYou are buying what’s in the picture and all sales final no returns accepted.If you are a bait shop or someone that what’s to start a sinker buying business please contact me.Good luck fishing and be safe
Buy It Now
$6.99 Shipping Condition: Used Location: Bridgeport, United States United Sports MFG No. 41 Lead Fishing Weight Sinker Molds 1/2oz - 2 1/2oz4 compartments ranging from 1/2 oz up to 2 1/2 oz
Buy It Now
Free Shipping Condition: New Location: Church Hill, United States FOR SALE IS A 54 LOT OF 4 OZ. BANK SINKER MADE BY A DO-IT-MOLD.
Buy It Now
$8.70 Shipping Condition: Used Location: Rockwell, United States Lot of two good used Do-It Lead Sinker molds. One is 16 oz Round Heads, thee other is 16th and 32nd oz. Please see pictures for details
$8.70 Shipping Condition: Used Location: Mechanicsburg, United States C. Palmer Mfg. Inc. 3/8 oz. 1/2 oz. 3/4 oz. and 1 oz. Bank Sinker Mold Model: 101 Used Aluminum A eight bank sinker mold. The weight of the sinkers are ... more3/8 oz. 1/2 oz. 3/4 oz. and 1 oz. The body of the mold is aluminum. The mold is used however remains in very good condition. This mold is manufactured by C. Palmer Mfg. Inc. West Newton, Pa. Please email me with any questions. I accept Paypal only and I usually ship within 24 hours of receipt of payment. If payment is not received within 7 days the item will be re-listed and negative feedback will be left. I do combine shipping costs on multiple items. I ship via the U.S.P.S. The cost of shipping includes USPS Delivery Confirmation for US addresses. Insurance is highly recommended. But is optional for the purchaser. Thanks for bidding and please look at my other items listed.
Buy It Now
$11.97 Shipping Condition: New other (see details) Location: Rochester, United States VTG C. Palmer MFG 808 Canon Ball & 451 &401 Sinker Molds Made In U.S.A. B59. Shipped with USPS Priority Mail.
Buy It Now
$14.50 Shipping Condition: New Location: Hereford, United States Do - It Corporation Molds - Many different models (one of each model). All are in their original packages. Price is per mold. Model ZR-4-24 Vibrating ... moreLure, JH-6-A - Horsehead Jig, RHB-7-A - Roundhead Jig, WS-10-A - Walking sinker, EG-8-A -Egg Mold, Worm - A - Worm Nose Jig, JM-7-A - Minnow Head Jig, PHB-5-A - Pony Head Jig, BASS-3-AY - Bass Jig 1/4 & 3/8 & 1/2, SHB-5-A - Shad Head Jig, JNR-6-A - Trout Jig, JYS-1058Y - Weedless Banana & Guard insert, ARK-3-AY - Arky Jig, JUS-5B-A - Worming Jig, TSH-4-A - Style H Tailspin, JH-4-A Horsehead Jig
Buy It Now
$8.65 Shipping Condition: Used Location: Cashmere, United States In very good condition. See pictures. Shipped only in the continental USA
Buy It Now
$11.60 Shipping Condition: New Location: Villa Rica, United States Enhance your freshwater fishing experience with the Do-It Cannon Ball Sinker Mold. PULL PIN PEG332 MODEL 1917 not included.
$6.23 Shipping Condition: Used Location: Pottstown, United States Used jig sinker mold assorted sizes.
Buy It Now
Free Shipping Condition: New Location: Smithfield, United States Choose size, 1 cavity total. Pictures may not depict size chosen. Cnc machined from 6061-T6 aluminum alloy Phenolic handles mounted to stainless steel ... morestuds.
$21.73 Shipping Condition: New Location: Oak Lawn, United States Vintage Split Shot Mold 500C Palmer MFG INC West newton PA 15089I will combine shipping.thanks for lookng
Buy It Now
$8.95 Shipping Condition: Used Location: Salina, United States This high-quality Palmer #500 Sinker Mold is a must-have for any avid fisherman. Made of durable aluminum materials, this mold makes 20 split shot sinkers ... moreat a time and is suitable for both freshwater and saltwater fishing. Crafted by a trusted brand in fishing equipment, this mold is perfect for creating sinkers to help you catch a variety of fish species. The silver color and 1-inch diameter ensure that these sinkers will blend in with your fishing gear. Whether you're a seasoned pro or just starting out, this Palmer #500 Sinker Mold is an excellent addition to your tackle craft collection.
Buy It Now
$10.40 Shipping Condition: Used Location: Otto, United States
Buy It Now
$9.50 Shipping Condition: Used Location: Bristol, United States Makes lead weights sizes 2oz 3oz 4oz 5oz 6oz weights.Nice as a collectible, or save money and make your own weights to fish. Fits in any tackle box.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States NEW-IN STOCK. DO-IT BANK SINKER MOLD(BK-4-L) MAKES 2. 3, 4, 5 OZ BANK SINKERS. 1 CAVITY EACH. 2 oz =56.699 grams. 3 oz. = 85.049 grams 4 oz. = 113.398 ... moregrams, 5 oz. = 141.748 grams DO-IT MOLDS ARE THE FINEST QUALITY AVAILABLE TODAY. International Buyers– Please Note shipping information below*THANKS FOR LOOKING. CHECK OUT OUR EBAY STORE FOR MORE. Be sure to add me to your! GO TO DO-IT MOLDS CATEGORY AND SORT BY HIGHEST PRICE FIRST FOR THE BEST ORDER OF SELECTION*DO-IT MOLDS* USA ONLY* FREE SHIPPING! PAYPAL ONLY. EMAIL THROUGH EBAY ONLY. CALL IF NECESSARY 973-945-8616. WILL SHIP AFTER PAYMENT CLEARS. RETURN UNUSED MOLDS FOR 100% REFUND OF PURCHASE PRICE. NO SHIPPING COSTS REFUNDED. NJ MUST ADD SALES TAX. INTERNATIONAL-PRIORITY ENVELOPE. NO TRACKING OR INSURANCE. PAY SHIPPING PER MOLD, SEE RATES BELOW. CANADA AND MEXICO-SHIPPING RATES SLIGHTLY LESS. SEE RATES BELOW. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. INTERNATIONAL- $14 SHIPPING PER MOLD. CANADA AND MEXICO- $10 SHIPPING PER MOLD. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Smithfield, United States Egg Slip Sinker multi cavity molds. 28 and 32oz 5" Tall blank. Choose Weight (first), Cavities and (pull pin size, if applicable). Up for your consideration ... morea new aluminum lead casting mold as shown. 1/8oz to 8oz 3" Tall blank.
Buy It Now
Free Shipping Condition: Used Location: Tacoma, United States Sportsman's Silverbell Vari-Mold lead sinker mold for fishing, duck decoy weights, makes 1/10 to 4 oz weights.
Buy It Now
Free Shipping Condition: New Location: North Richland Hills, United States "Slip" by your fish undetected. The line will slip through the Egg or Slip sinker, so the fish will not feel the weight of the sinker when it picks up ... morethe bait. The hook settles more quickly without the sinker's resistance.
3d 8h 26m 32s 0 bids
$19.99 Now
$12.45 Shipping Condition: Used Location: Newport, United States DO-IT egg sinker 3 cavity mold, model EG 3-2 made by DO-IT Corporation of Denver Iowa USA.
$6.23 Shipping Condition: Used Location: Pottstown, United States Up for auction is a vintage Palmer Mfg Sinker Mold. It is a Model 525 Worm Slip Sinker Mold. Please use the pictures to assess condition. Its clearly ... morea used item and shows some spots of corrosion. US Sales Only. Paypal Only. Thanks for looking
Free Shipping Condition: Used Location: San Juan Capistrano, United States Like new condition I don’t think it was ever used
$12.45 Shipping Condition: Used Location: Hamel, United States Lil dirty great shape Handles removed to fit in small priority mail flat rate box shipped next day make sure to check out my other mold Auctions Posted ... morewith
$5.45 Shipping Condition: Used Location: Pottstown, United States AS PICTURED. PALMER MFG LEAD SINKER MOLD NO 552. 5 WELL MINI JIG MOLD IN VERY GOOD USED CONDITION. I AM NOT SURE OF THE WEIGHT OF THE JIG HEAD WHEN PRODUCED. ... moreTHANKS. PLEASE NOTE I WILL SHIP INTERNATIONALLY TO CANADA. AUSTRALIA, JAPAN, THE UNITED KINGDOM, FRANCE, AUSTRIA, SWITZERLAND AND GERMANY ONLY. PLEASE NOTE THAT USPS 1ST CLASS INTERNATIONAL SHIPPING RATES RECENTLY DOUBLED! SO PLEASE EMAIL FOR SHIPPING RATE QUOTE BEFORE YOU BID THANKS. I GLADLY ACCEPT PAYPAL OR OTHER FORMS OF PAYMENT FOR THOSE WHO DO NOT HAVE A PAYPAL ACCOUNT. IF YOU ARE NOT SATISFIED WITH YOUR PURCHASE CONTACT ME AND I WILL DO MY BEST TO RESOLVE THE PROBLEM, THANKS VERY MUCH. I SHIP WITHIN 24 HOURS OF PAYMENT RECEIVED BARRING HOLIDAYS AND WEEKENDS OR INCLEMENT WEATHER. THANKS. INTERNATIONAL BIDDERS NOTE THAT ANY ITEM OR COMBINATION OF ITEMS WON THAT EXCEEDS 30 U.S. DOLLARS IN VALUE WILL BE MAILED BY REGISTERED MAIL. SORRY NO EXCEPTIONS TO THIS SHIPPING REGULATION. INTERNATIONAL BIDDERS PLEASE NOTE THAT THE SELLER IS NOT RESPONSIBLE FOR ANY DELAYS OR FOR CUSTOMS CHARGES ON ITEMS WON. IT IS THE RESPONBILITY OF THE BUYER TO BE AWARE OF ANY CUSTOMS CHARGES FOR ITEMS FOR THEIR OWN COUNTRY AND THAT THERE COULD BE DELAYS IN DELIVERY DUE TO CUSTOMS. THANKS. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147c1884ef3-0x115-
Buy It Now
Free Shipping Condition: New other (see details) Location: Gouverneur, United States Do-It Bank Sinker Mold model BK-8-A. 1101 One sinker mold with 8 cavities. One each of: 1/8, 1/4, 3/8, 1/2, 3/4, 7/8, 1& 1-1/2 oz. Bank on this sinker ... moreto lower your line to new depths. And you’ll pull’em in like chump change…in fresh or saltwater. Do-It Molds. The finest sinker molds available. Made of ultra hard, warp resistant aluminum alloy construction with machined faces and precission aligned hinges. Brand new! Thanks& happy fishing! PS.We always leave feedback& really appreciate yours! FREE shipping in the USA! Check out my!
Buy It Now
Free Shipping Condition: New Location: Granger, United States 25 (twenty five) 3 Oz PYRAMID SINKERS Lead Fishing Weights Free Shipping. High Quality LeadPoured with Do It moldBuy with confidence as we have sold over ... more250,000 items
Buy It Now
$9.56 Shipping Condition: Used Location: Winlock, United States MODEL BL-9-AB DO-IT BELL SINKER MOLD/MOULD 9 CAVITY 1/8- 1/4- 1/2- 3/8- 5/8- 3/4- 1- 1& 1/2- 2 OUNCES GOOD CONDITION PLEASE SEE PHOTOS& JUDGE ... moreFOR YOURSELF USES#1 BRASS EYES NOTE: Handles included but will be removed for shipping ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ END OF AUCTION: Winning bidders are notified within 24 hours of auctions end. An email confirmation response is expected within 2 days. payment: PayPal accepted. But only from buyers whose Paypal account is registered in the United States or Canada and who have a confirmed shipping address. NO EXCEPTIONS. PayPal payments should be made within 3 days of auction end. Postal payments should be postmarked within 3 days of auction end. and an email notifying me of that payment is in the mail would be greatly appreciated. Buy-it-now(if offered) will require immediate paypal payment. shipping: Sorry: No International Shipping unless prior arrangements have been made and cost adjustments applied. Please. Feel free to ask. Free shipping, if offered. Is to the continental U.S.A. only or where the cost is the same. I GLADLY COMBINE AUCTIONS TO SAVE YOU SHIPPING COSTS. If you win multiple items. Please wait for an invoice from me, not ebay, to receive discounted shipping. insurance: Optional on this item: $1.75 for coverage up to and including $50.00. $2.25 for coverage from $50.01 to $100.00. $2.75 for coverage from $100.01 to $200.00. MY guarantee: The only option eBay allows for returns is for sellers to give buyers at least 14 days to request a return. I think this is ridiculous as it shouldn't take more than 3 days. after receipt of an item. To request a return. Thus my listings automatically show that I don't accept returns. However. I do accept returns under the terms listed below. I stand behind my items and descriptions. If an item is not as listed. Return it postmarked within 3 days of receipt for a full refund including shipping. You must contact me via email first. Guarantee does not
|
|
|
|
Hilts custom sinker mold Silcone based molds made with a kit from Hilts not incl
The hilts mold being offered is in good shape. The handles had to be replaced because the had been removed and lost dur ing some moves that had been made.Th is mold requires a kit from hilts of silicon based material and is used to make duplicates of jigs or anything that will fit the opening. the previous owner used it to make special jigs and ground out a releif for the hooks. I used it to make some hopkins. you have to order the kit from hilts. I will ship med USPS box w/tracking number I do not ship int ernational thanx for looking I will combine shipping on items listed on e-bay
|
|
|
DO IT Molds & C. Palmer HOT POT-2 - Pyramid Sinker PM-5AB & Bank Sinker BK-4-L
Get started making your own sinkers and save money with this lot of sinker making kit. You get everything pictured. Only thing else you'll need is the lead. Check out our other listings for more great finds and be sure to add us to your favorites list. PLEASE NO BIDDING IF YOU DO NOT INTEND TO PAY. We only accept PayPal payment. Payment is expected within 3 business days. An unpaid item case is opened if payment has not been received after 7 days of auction end. We will be able to extend this if you communicate with us. We ship more than 90% of our items same day payment is made and would appreciate the same prompt courtesy with your payment. ~Shipping cost or Free shipping is for United States and Puerto Rico~ Any location outside U.S. continental 48 or Puerto Rico will require special shipping quote. Please email us before placing bids ... moreto get your shipping cost. All items will be shipped within one business day upon receipt of payment. Return Policy: Items may be returned for a full refund of item purchase price within 14 days ONLY. If the item you receive is not the same as the item pictured in the listing. Or there is some other SERIOUS issue we will issue a full refund. Our items are sold"as is" and it is up to you to ask questions about them before bidding or buying. If you do not we will not be held responsible. If there is an issue with your item. Or the item was damaged during shipping please let us know Immediately! Also please save all packing materials and boxes in case an insurance claim is filed or a return is necessary. Failure to do so may result in a denial of refund or insurance claim refund. Posted with
|
|
|
PYRAMID SINKER MOLD 1-2-3-4-5 oz C. PALMER MOLDS #351
Up for auction is a palmer sinker mold. Item is in excellent condition. Hinge in perfect. Makes 1-2-3-4-5oz pyramid sinkers. Please ask any questions before bidding. I do not ship overseas. DO NOT ASK.
|
|
|
HERTERS INC. WASECA MINN. U.S.A. SINKER, JIG MOLDS, MODEL 2-J and 4A4, FISHING
HERTERS INC. WASECA MINN. U.S.A. SINKER. JIG MOLDS, MODEL 2-J and 4A4, FISHING ITEMS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fishing Sinker Molds Reading, Hilts
Rare vintage Reading sinker molds. Include two hilts sinker molds and 20 lb Lee furnace. Good condition!
|
|
|
5 Assorted Sinker Molds, Do It/Hilts/CPalmer. Bass Casting/Jig/Splitshot/ NICE!
Do it Bass Casting 1/8-2oz(NEW) Do it Football Head(LIKE NEW) C Palmer Pinch On(Older mold still in good working order) Hilts Arky Jig 1/2oz(LIKE NEW) Hilts Split shot(2 sizes) LIKE NEW) Also small ladle with pour spout and small Do it Ladle.
|
|
|
Vintage lot of 13 sinker molds mostly C. Palmer with extras
You are bidding on a scrap yard treasure. There are 16 pieces total 13 aluminum sinker molds 1 c. Palmer trivet 1 pokey thing. And 1 cast iron ladle. Starting on the left from top to bottom in picture#1. 1. C. Palmer No 103 2. H- I 2 A 3. H- I 1 A 4. Palmer MFG 101 5. C. Palmer No 101 6. C. Palmer MFG(the hinge is broken) Middle column 7. Palmer MFG 12G 8. C. Palmer MFG. 104 9. C. Palmer MFG 104 10. MA 3 11. Do- It corporation egg mold(green handle) Last two on right 12. C. Palmer No 104 13. C. Palmer No 351 Please feel free to ask questions and take a look at my other scrap yard/yard sale/storage auction finds Payment: Please pay within 5 days from the end of the auction. Pay Pal only please Shipping: I will ship your items the following business day after your payment is received Thank you and Happy Bidding
|
|
|
HILTS MOLDS LM-SLAB SINKER MOLD LEAD CASTING 2, 1 1/2, 1, 1/2 Oz Lures
EXCELLENT CONDITION 60.00$ VALUE other ebay auction Posted with
|
|
|
SPLIT SHOT SINKER MOLD C.PALMER MOLDS #500 ASSORTED LEAD FISHING JIG FLY
Vintage Split Shot Mold 500C Palmer MFG INC West newton PA 15089I will combine shipping.thanks for lookng
|
|
|
3 Herters Vintage Fishing Sinker Molds 4G3 4A1 4F3 Waseca Minn. USA
Vintage 3 Herters Fishing Sinker Molds 4G3, 4A1& 4F3 Waseca. Minn. USA The 4A1& 4F3 seem to be in good condition The 4G3 won't open easily all the way. When I tried to force it one of the wood handle sides came off. I put it back on but it will need longer screws or bolts to make it sturdy. also one of the sinker slots has been damaged or ground out. $10.00 Shipping I also have a Herters Trading Blanket for sale on ebay. buy both& get combined shipping. Thanks: fuzzicle
|
|
|
3 VINTAGE LEAD SINKER MOLDS 2 ARE HORROCKS IBBOTSON TACKLE CO L@@K
FREE SHIPPING. No International shipping. I welcome all other forms of payment including Paypal. They are in very good condition.No cracks,chips,or repairs. No reserve.Vivid colors and fantastic display appeal will make this a welcome addition to any collection.Thanks for looking and good luck bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
4 Vintage Sinker Molds ~ UNITED, PALMER, ERIE JIG, HILTS
These are four vintage sinker molds. They are marked: Erie Jig. Assorted Sizes Model: JE-6-A, 584, Do-It Corporation, Denver, Iowa. Hilts Molds. Burbank, CA Palmer Mfg. West Newton. PA, Sinker Mold No 500 United Sports Mfg. 36
|
|
|
@ PYRAMID SINKER MOLD@ 2-3-4-5-6 oz C. PENN SPORT MOLDS #4 @LEAD FISHING DO-IT
WILL COMBINE SHIPPING. I HAVE SEVERAL LISTED AND WILL BE LISTING SEVERAL MORE.
|
|
|
DO-IT BANK SINKER MOLDS 3 IN ALL
You are bidding on 3 good used condition bank sinker molds 2 molds are do-it bank sinker model# bk-1-20 and bk-8-a and one c.palmer#101. The bk-1-20 is a 20oz and the bk-8-a is 1/8 to1 1/8 oz and the palmer is 1/8.1/4,3/8,1 oz Please. If you have any trouble with any item, please contact me before leaving negative feedback so I can make it right. Thanks in advance. POLICIES& RETURNS: Policies and returns vary from item to item so please read the description and check the return policy on the specific auction you are watching. Used part returns vary by item. Return shipping is buyers responsibility. I check and test all used parts to the best of our ability. If you receive an item that you deem unfit for use please contact me as soon as possible to resolve the situation. Due to the nature of electronic components these items are sold“as-is” ... moreunless otherwise stated in the description. SHIPPING& HANDLING: Shipping rates apply to lower 48 states. AK. HI, and PR residents may be subject to shipping surcharge. Send address for quote. Thank you for your understanding. My default shipping carrier for most items is UPSP through paypal and you will recieve a email with a tracking# Your shipping and handling charge is calculated from usps flat rate boxes or you can op for UPS shipping. UPS don't deliver to PO boxes. Most items ship same day or next day depending on the time of day of the purchase. However. Please allow up to 2 business days. Tracking numbers are supplied with UPS shipments to. We DO combine shipping. If you purchase multiple items just request an invoice and I will adjust the shipping as necessary. Damage Policy: Shipping Insurance through USPS will be offered at time of checkout and UPS will automatically have insurance calculated in the shipping cost. If you do not opt for the shipping insurance. Any shipping damage will not be covered. Contact me immediately if shipping damage is discovered so I can start a claim on the package. Thanks for your understanding. Payment accepted: I accept all fo
|
|
|
VINTAGE NO-SNAG FLAT SINKER MOLD 1/4 oz to oz C. PALMER MOLDS #201
This vintage no snag Palmer sinker mold. Model number 201, is in very good condition. It will make 4 sinkers from 1/4 oz. to 1 oz. Sorry. No Local Pickups Immediate payment due on Buy It Nows. Payment must be received within 5 days on REGULAR auctions. WE DO NOT SHIP TO Puerto Rico or Guam. Hawaii and Alaska will only be shipped Priority Mail. Please calculate Postage Prior to bidding. WE ONLY ACCEPT PAYPAL AS PAYMENT METHOD. Insurance is automatically included when you opt to have your item shipped using UPS Ground only. We describe our items to the best of our ability. But in the unlikely event that theirs a problem, please contact us and see details in our return policy below.
|
|
|
DO-IT FISHING LEAD SINKER MOLDS ASSORTMENT OF FIVE (5 LEAD MOLDS)
DO-IT FISHING LEAD SINKER MOLD ASSORTMENT(5 LEAD MOLDS) THIS SALE IS FOR AN ASSORTMENT OF 5 DO-IT SINKER MOLDS LIKE NEW! 1. DO-IT SHAD BLADE 1/4 AND 3/8 MODEL:ZS-4-S 2. DO-IT SWM JIG 1/8 1/4 3/8 MODEL: SWM-3-A 3. DO-IT ROUND SE JIG ASSORTED SIZES MODEL: RSE-6-A 4. DO-IT WORM RIG SINKER ASSORTED SIZES MODEL:WR-9-A 5. DO-IT MINNOW HEAD JIG ASSORTED SIZES MODEL: JM-7-A SLIGHTLY USED. IN EXCELLENT CONDITION THESE MOLDS ARE LIKE BRAND NEW INSIDE& OUT! SE HABLA ESPAÑOL CLICK ON THE PICTURES TO ENLARGE THEM IF YOU NEED MORE SPORTS EQUIPMENT PLEASE VISIT OUR OTHER STORES ON THE LINKS BELOW 1024x768 Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 1024x768 Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
|
|
|
Lot of 3 C. Palmer Sinker Molds Canon Ball 801, Rock Cod 903, & a Pyramid 352
Up for bid is a lot of 3 C. Palmer Sinker Molds in good condition. Includes a Cannon Ball sinker mold#801. A Rock Cod sinker mold#903, a Larger pyramid style sinker mold#352. All are marked West Newton PA. Please view pictures for a better description& feel free to ask questions. Thanks! See my other auctions at seller dmdax. THANKS! BUYER PAYS SHIPPING. FEEL FREE TO CALCULATE YOUR OWN SHIPPING WITH THE EBAY CALCULATOR. WINNING BIDDER MUST CONTACT ME WITH IN 48 HOURS WITH THEIR CITY. STATE, ZIP. IF USING PAYPAL, YOUR ITEM WILL BE SHIPPED TO THE ADDRESS LISTED ON YOUR PAYPAL ACCOUNT UNLESS IT IS AN UNCONFIRMED ADDRESS. SEVERAL INVOICES WILL BE SENT ONCE AUCTION HAS ENDED. PAYMENT IS DUE WITH IN 3 DAYS AFTER AUCTION ENDS. NO EXCUSES. EBAY WILL ISSUE A NONPAYING BIDDER ALERT AFTER 7TH DAY. INCOMPLETE TRANSACTIONS = NON-PAYING BIDDER MARK.
|
|
|
Lot Fishing Sinker Weight Mold Molds Palmer's Herter's Penn Sport Lil Mac
Lot of Fishing Sinker Weight Molds Included are the following: Penn Sport#12 Palmer 125 Li'l Mac 8-0z Cannon Ball Herter's Model 4A9 Herter's Model 4A1 Herter's 4A8(missing one wood handle) King Neptune 1NO'S( not sure what it is) One homemade mold. All are used but still useable. Please ask questions before bidding. Buyer to pay shipping cost.
|
|
|
2 Sinker Molds -Slip Sinker Mold 12 -United Mfg.Mold
Up for auction are 2 Sinker Molds. One is a Slip sinker Mold 12 and the other is a United MFG. Mold. Check my pictures for detail and condition. I REQUIRE IMMEDIATE PAYMENT AT THE CONCLUSION OF THE AUCTION. IF YOU HAVE ANY QUESTIONS PLEASE CONTACT ME.
|
|
|
2 LIL MAC Pencil lead sinker molds 1 pours 3/8 x 4 the other pours 1/4 x 4
2. LIL MACK PENCIL LEAD SINKER MOLDS. 1. LIL MAC#710 1/4 x 4 Pencil lead sinker mold has 1 part of the hinge is broken off. It still closes and lines up to pour. See the last 7 pictures for details) 1. LIL MAC#700 3/8 x 4 Pencil lead sinker mold in excellent condition. Thanks for looking and Good Luck! Check out my other items! More great Items you might like. I can combine Shipping on 3 or more mold auctions! On Jan-19-13 at 15:47:31 PST. Seller added the following information:
|
|
|
50 POUNDS OF LEAD INGOTS FOR FISHING SINKER MOLDS (LEAD INGOT) WHEEL WEIGTHS
This auction is for 50 lbs of USED wheel weights lead already cleaned(fluxed twice) NOT HEATED OVER 675F AND MELTED INTO CORN BARS. The hard work is done! This lead is excellent for making fishing sinkers.ASK ANY AND ALL QUESTIONS BEFORE BIDDDING NO REFUNDS! Ingots fit great in my lee melting pot! Bass pro shop wants $22.99 for 5 pound and this lead is cleaner! SHIP SAME DAY PAID OR NEXT DAY! THE PRICE OF LEAD IS GOING UP SO GET IT NOW! Answer to often asked question: how do I remove zinc? Lead melts at 621 F and zinc melts at 787 F. When temperature reached 675 F. Anything not melted is removed. Also look at wheel weights before I start,still miss afew but the temperature will tell me! IF YOU WANT LEAD INSURED IT WILL COST EXTRA $1.85 I WILL PAY FOR DELIVERY CONFIRMATION!
|
|
|
HERTERS MOLDS INC MODEL:4-A-2 LEAD 3/8th thru 1 oz sinker molds
Up for bid is a nice Herters Mold for lead sinkers. Be sure to check out my other listings as I do combine shipping! Thanks for looking!
|
|
|
FISHING SINKER MAKING MOLDS LOT OF 2 LEAD SINKER MOLDS- Spoon Lure DO IT Mold
Lot of 2 Do It Sinker Molds. Look to be Spoons or Lures? Refer to the pictures and bid accordingly. Will ship USPS priority. FAST!
|
|
|
VTG DIY FISHING SINKER MOLDS 1 PALMER 1 PENN SPORT AND 1 PALMER JIG HEAD MOLD
HELLO WELCOME. UP FOR BID IS A LOT OF THREE VINTAGE SINKER MOLDS.FOR BANK FISHER MAN.ONE IS A PENN SPORT NO MODEL NO. SIZES ARE FROM 3/8 TO 1 OZ. TWO ARE PALMER MFG. WEST NEWTON PA. ONE MOLD#101 FROM 1 OZ TO 3/8 OZ. THE OTHER MAY BE A JIG HEAD MOLD#561 SIZES 1/4OZ TO 1/2OZ. PLEASE VIEW PICTURES CAREFULLY BEFORE BIDDING.QUESTIONS JUST ASK. THANKS FOR YOUR TIME. HAVE A GOOD DAY
|
|
|
lot of 4 Aluminum and Cast Iron Sinker Molds Used
Here we have a lot of Aluminum and Cast Iron Sinker Molds In great shape. All handles intact and you can see a representative sinker in the pics Starting bid is less than 15 bucks each Take them all even if you dont need them Keep what you want and Ebay the rest!
|
|
|
HILTS MOLDS LMBU-M BULLET SLIP SINKER WORM WEIGHTS FISHING BASS TACKLE WALLEYE
WELCOME UP FOR BID IS A DO-IT YOURSELF SINKER MOLDS. THE MOLD IS A HILTS MOLDS MODEL LMBU-M. IT IS A 4 SINKER COMBO MOLD WHICH MAKES FISHING BULLET SLIP SINKER. THE BULLET WEIGHT FROM 1/8. 3/16. 1/4, AND 5/16 OUNCES. THE BULLET SINKER ARE USED IN TEXAS AND CAROLINA RIGGED PLASTIC WORMS. IN GREAT WORKING CONDITION NO CRACKS OR CHIPS IN THE MOLD. HAS GOOD HANDLES AND SMOOTH HINGES. PERFECT FOR ANY FISHERMAN TACKLE BOX. ANY QUESTIONS FEEL FREE TO ASK THANKS.
|
|
|
3 VINTAGE FISHING LEAD SINKER MOLDS - PALMER 101, 102 AND PENN #8
VINTAGE SINKER MOLDS Description WELCOME TO RETRO RESALES.FINDING TREASURES IS OUR BUSINESS.ALWAYS ADDING NEW ITEMS SO KEEP WATCH. HERE UP FOR AUCTION ARE 3 VINTAGE SINKER MOLDS THAT WERE FOUND AT AN OLD ESTATE.LOOK TO BE IN NICE USED CONDITION. SEE PHOTOS)SEE ALL PHOTOS BEFORE BIDDING AND PLEASE ASK QUESTIONS. I WANT MY CUSTOMERS HAPPY WITH THEIR PURCHASES AND WILL DO EVERYTHING I CAN TO PROVIDE A 5 STAR SERVICE.LET ME KNOW IF THERE IS A PROBLEM WITH YOUR PURCHASE BEFORE LEAVING BAD FEEDBACK. BECAUSE I WILL FIX IT.GUARANTEED. USA SHIPPING ONLY ON ALL KNIVES AND GUN PARTS.MUST BE 18 OR OLDER TO PURCHASE KNIVES. INTERNATIONAL BIDDERS ARE RESPONSIBLE FOR THEIR COUNTRY'S IMPORT RESTRICTIONS. I WILL NOT FALSIFY CUSTOM FORMS. ALL VINTAGE ELECTRICAL ITEMS MAY NEED NEW WIRING OR REPAIRS WHICH I DO NOT DO. THIS IS THE BUYERS RESPONSIBILTY TO ... moreCHECK ITEMS FOR SAFETY BEFORE USE. GOOD LUCK!
|
|
|
Lot of 7 Lead Fishing Sinker Molds Herter's Universal C. Palmer
These are my Grandpa's fishing weight molds.included are: C. Palmer No. 301 C. Palmer No. 351 with one broken handle Herter's Inc. 4A3 Herter's Inc. 4A8 Universal 26-P? that has 14B on it.makes 1 2 3 4 ball size? that has no markings.makes 1 2 3 4 pyramid weights Let me know if you have any questions. Thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fv%7F.rpn36%3E-13c7549b05e-0x106-
|
|
|
SET 2 SINKER LEAD MOLDS: PENN SPORT NO 16 & C. PALMER NO. 401 EXCNT CND
YOUR BIDDING ON A SET OF(2) USA MADE LEAD SINKER/ WEIGHT MOLDS: PENN SPORT NO 16& C. PALMER NO. 401 WEST NEWTOWN. PA BOTH IN EXCELLENT CONDITION NO INTERNATIONALLY SHIPPING ON THIS ITEM
|
|
|
BANK SINKER MOLD ~ 2-3-4-5-6 oz. UNIVERSAL MOLDS #26-B ~FISHING LEAD LUREs
Fishing is not an area of expertise for me. So check out the pictures as they are your best description. This item is a Universal Mold 26-B to make 2 oz. 3 oz. 4oz, 5oz. and 6 oz. lead sinkers. it would benefit from a clean-up. All vintage items are final sales. So feel free to ask questions.
|
|
|
2 DO-IT MOLDS EGG SINKER MOLDS 2 SIZES 2 OZ &3 OZ MODEL EG-3-2 AND EG-3-3
2 DO-IT MOLDS EGG SINKER MOLDS 2 SIZES 2 OZ&3 OZ MODEL EG-3-2 AND EG-3-3 THIS IS 2 EGG SINKER MOLDS IN TWO SIZES. IT MAKES 2 DIFFERENT SIZES. THIS DO-IT MOLD IS MODEL EG-3-2 AND A EG-3-3 THEY COME ONLY 1 PUSH WIRE.WORKS ON EATHER MOLD THEY LOOK GREAT AND THEY ARE IN GREAT SHAPE I THANJ THEY WERE USED VERY LITTLE THESE MOLDS ARE FROM A CLOSED TACKLE STORE ++++++++IT COMES WITH FREE SHIPPING++++++
|
|
|
Two Vintage Sinker Molds Herters 4A3 and a 7 Sinker Mold
Up for this“BUY IT NOW” Auction is An old Herter's sinker mold#4A3 In real good condition. 5 molds in it-1 oz thru 5 oz. No cracks or repairs. The wood handles are good with just a little paint loss. Also included is another vintage sinker mold with 7 molds in it. I am guessing they are from ¼ oz up to about 3 oz. Please read and agree to ALL of the following before you bid: Buyer to pay $5.15 shipping to the lower 48 states only. Paypal only for Payment. The wood handles on the Herters mold will be removed so that these will fit in a small flat rate priority box to make shipping less expensive. Please only bid if you are able to re- assemble them! All of my items are sold As-Is unless otherwise stated- I am describing them to the best of my knowledge and ability. If You have ANY questions about the item that You are about to bid ... moreon, Please ask them in ADVANCE of the end of the auction. Refunds ONLY given if I grossly misrepresent an item. Shipping and insurance costs on the returned items WILL BE YOUR RESPONSIBILITY. Thanks for your bid!
|
|
|
Do-It Molds #1124 NO-SNAG SINKER MOLD - Model: NS-3-A - Assorted Sizes
Do-It Round Flat SINKER MOLD Assorted Sizes Model: NS- 3-A Overall Very Good Condition. The handle shows some wear(scuffs, a small chip) but the interior looks great/ very clean Please View the Pictures for the Best Description. Questions Welcome, Close-ups Available. I Will Combine Shipping Check out my!
|
|
|
LOT OF 7 VINTAGE FISHING SINKER MOLDS AND LEAD PALMER, PENN, SNAG O HOOK
You are bidding on A VINTAGE LOT OF 7 MOLDS AND SOME LEAD. HERE ARE THE NAMES ON THE MOLDS. SNAG O HOOK. P ENN SPORT. PALMER, C. PALMER. THERE ARE A COUPLE WITH NO NAMES. THERE IS 18 POUNDS 13 OUNCES OF LEAD INCLU DED WITH THE MOLDS. THIS WOULD BE A GREAT LOT FOR SOMEONE LOOKING TO GET INTO MAKING THERE OWN SINKERS OR TO ADD TO YOUR OWN SET. Any questions. Please ask. Weight is 30 POUNDS. boxed. Please note International First rate shipping below I insure all items that the post office offers insurance in that country. I do not set the cost of shipping. So please don't give me bad marks because the shipping was too high. I do combine purchases to save on shipping. So please wait for my invoice. I ship most items the day after payment is received-other than Sundays& holidays. The post office does not insure First Class International ... moreMail. The post office no longer insures items to Great Britian. Ireland and some other countries. Please check with USPS.com to see if the post office insures to your country. For other countries, if you want your item insured, you have to select USPS International Priority Mail. Most international items have an extra charge added at customs. I can not change an item to gift or lower the cost. Insurance only covers the cost of the item on the custom's form. If you want to chance First Class with no insurance, please let me know before paying so I can add it as a shipping option. My shipping address is 609 Norway Street. Grayling, MI 49738. Please use USPS.com to calculate your shipping costs. Please use the eBay message system to contact us. I do not check my email.
|
|
|
Do-It Molds #3175 Round Flat SINKER MOLD - Model: RF-4-LB - Assorted Sizes
Do-It Round Flat SINKER MOLD- 3175 Assorted Sizes Model: RF-4-LB Overall Very Good Condition. The handle shows some wear(scuffs, a small chip) but the interior looks great/ very clean Please View the Pictures for the Best Description. Questions Welcome, Close-ups Available. I Will Combine Shipping
|
|
|
BELL SINKER MOLD 1/8 thru1-1/2oz C PALMER MOLDS #301 LEAD CASTING BASS SINKERS
works fine
|
|
|
JUNK DRAWER LOT LEAD SINKER FISHING MOLDS C.PALMER MFG LI'L MAC MIDGET VINTAGE
BEFORE YOU BID PLEASE READ BELOW. YOU ARE BIDDING ON 5 FISHING MOLDS.2 READ C.PALMER MGF.THE BIGGEST IS 10 1/2 X 4 3/4 INCHES FOLDED UP.INSIDE ARE THE NUMBERS WERE THE SINKERS WOULD BE MADE.8.10,15,16.ON THE OUTSIDE READS SINKER MOLD NO 104.THE OTHER IS 9 3/4 X 2 1/2 FOLDED UP.THIS ONE DOES NOT OPEM FLAT LIKE THE OTHERS.LOOKS LIKE SOMEONE MAY HAVE REPLACED THE ORIGINAL PIN.SINKER NUMBERS ARE 1,1,3/4,3/4,1/2,1/2,AND MAYBE 1/4,1/4.I COULD BE WRONG BECAUSE SOME OF THE NUMBERS ARE HARD TO READ.THERE IS ONE MOLD THAT HAS ON THE FRONT H-1,18A,IT'S 7 1/2 X 3 INCHES CLOSED UP.THERE ARE 2 LI'L MAC MIDCET MADE IN WILSONVILLE,OREGON USA.ONE HAS A BLACK HANDLE.THE OTHER OFF WHITE AND LOOKS LIKE A DIFFERENT MATERIAL THAN THE BLACK.BLACK HANDLE MOLD HAS NUMBERS 24-1/32-1/16,570-6-4.OTHER HAS NUMBERS 05-5/16-3/8-2 PAT PEND.BOTH ARE 10 INCHES OPENED ... moreUP.DON'T KNOW MUCH ABOUT ITEMS LIKE THIS.THEY DO SHOW SOME WARE AND AGE. REMEMBER MOST OF MY ITEMS ARE OLD AND NOT NEW AND HAVE BEEN KICKED AROUND FROM HOME TO HOME.STORED IN MANY OF ODD PLACES AND HAVE COME FROM DIFFERENT PLACES.INTO MY HANDS FOR YOU TO WIN. I DO COMBINE SHIPPING IF I CAN.THIS BOX IS A FULL AS I CAN GET IT. I DON'T HAVE A LOT OF RULES LIKE SOME.I ALWAYS ASK THAT YOU PAY WITHIN A TIMELY MANNER. IF YOU ARE THE WINNING BIDDER AND ARE FIGHTING TO THE END WHEN THE BIDDING IS OVER.THE FAIR THING TO DO IS PAY AFTER THE BID IS OVER.UNLESS THERE ARE OTHER REASONS.MAYBE YOUR BIDDING ON MORE AUCTIONS. 1ST TIME EBAYER'S PLEASE MAKE SURE YOU HAVE PAYPAL. I CAN ONLY MAKE TRIPS TO THE POST OFFICE A COUPLE TIMES A WEEK AND WITH THE OTHERS AUCTIONS IT TAKES TIME TO PACK EVERYTHING UP. I WILL ALWAYS TRY TO ANSWER ALL QUESTIONS THE BEST AS I CAN.SORRY I CAN'T WRITE EVERY EBAYER AFTER YOU WIN AND SAY THANKS BECAUSE I DON'T HAVE A LOT OF TIME.SO IF YOUR THE WINNING BIDDER THANK YOU VERY MUCH. AS YOU SEE BELOW I ONLY SHIP TO THE UNITED STATES.THE REASON IS IS BECAUSE IT COST TO MUCH TO TRACK OUT OF THE USA AND I HAVE BEEN BURNT TO MANY TIMES. WILL ONLY SHIP TO
|
|
|
Do-it Molds River Sinker mold
Do-it sinker mold. River Sinker, three cavity. three sizes 2, 3, 4 oz. uses No. 2 brass wire eyes. Mold has been conditioned with a release agent so the sinker don't stick.
|
|
|
HILT'S MOLDS BANK SINKER MODEL LMBS -12-2 12 OZ SINKER MOLD
USED HILT'S MOLDS BANK SINKER MODEL LMBS-12-2 12 OZ SINKER MOLD IN VERY GOOD CONDITION.
|
|
|
Lot of 6 Palmer Penn Sport H-1 Gang Sinker Molds 1oz - 16oz
Lot of 6 Palmer Penn Sport H-1 Gang Sinker Molds 1oz- 16oz AT THE END. This auction is for a lot of 6 Palmer. Penn Sport, H-1gang sinker molds. There are 3 Palmers, 1 Penn Sport and 2 marked H-1.One Palmer is a flat diamond bank that makes 8,10,12,14 oz. sinkers,the small Palmer makes regular 1,2,3,4,5 oz sinkers,and the medium Palmer makes regular 2,3,4,5oz(this one the hinge is broken,you can still used this with a c clamp or visegrips)The Penn Sport makes 3,4,5,6,8oz sinkers.The last 2 are marked H-1,the small one makes 1,2,3,4,5oz sinkers and the large one makes 8,10,12,16oz sinkers.Please check my other auctions for more great items. Enjoy! Paypal is accepted and preferred. Payment is expected within 48 hours of purchase. Items are shipped USPS. Unless weight or size exceed shipping requirements. Fed Ex is used for larger items. Delivery ... moreconfirmation is required. Add To Favorites My Auctions Feedback Template and Photo By Olde*Blue*Barn*Primitives Copyright © 2008. 2009
|
|
|
C. Palmer mfg. & Do-It Industries Sinker Molds EG-9-M2 , 151 , 201
C. Palmer mfg. Do-It Industries Sinker Mold Medium Egg 3/8& 3/4Oz EG-9-M2. Palmer#201 Flat Snagless 1/4-1Oz. Palmer#151 Auction starts at.99 cents so bid to win. Thank You. No International Shipping
|
|
|
~Vintage Palmer #452 Slip Egg shape Sinker Mold! 1/2 oz. & 1 oz. Molds! L@@K!~
Vintage Palmer#452 Slip Egg shape Sinker Mold! 1/2& 1 oz. Molds Offered in this auction is a Vintage C. Palmer Slip Egg Shaped Fishing Sinker Mold# 452 in great condition! It is marked 1/2& 1 oz. and measures 8" long by 2 1/4" wide and is marked on the back C. PALMER MFG. INC. WEST NEWTON, PA. 15089. No reserve and a very low starting price so bid to win and make your own fishing sinkers! I have Two other Palmer's Sinker Molds and a Palmer Hot Pot listed at this time so please check them out. If you're interested in more than one, I'll be glad to pack them together so save on shipping cost. Please don’t ask how much it would be for this and that since everything is already packed up so I can give an accurate shipping cost for each. I will ship the most economical way! Please look at all the pictures as they are ... morepart of the description. EVERY PACKAGE SHIPPED VIA POST OFFICE(in the USA) WILL have DELIVERY CONFIRMATION– it is included in shipping cost. BEFORE YOU EMAIL ME AND COMPLAIN ABOUT THE SHIPPING COSTS. CHECK AND SEE IF THERE ARE OTHER OPTIONS FOR SHIPPING– I TRY TO ALWAYS GIVE A CHOICE. I HAVE A 2 DOLLAR HANDLING FEE AND THE REST IS SHIPPING COST CALCULATED BY EBAY. I LIVE IN FLORIDA AND SHIPPING COST IS CALCULATED USING YOUR ZIP CODE, WEIGHT AND DIMENSIONS OF THE PACKAGE. If the shipping cost is too high, then I would suggest that you look for a similar item from a seller that lives closer to your area. Quotes shown in eBay for heavier packages are via UPS and are NOT correct– I’ll email you an invoice with the correct cost at the end of the auction. Good Luck and Happy Bidding! And please check out the other wonderful"Treasures" I have listed on eBay by clicking on View seller's other items! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
~Vintage Palmer #453 Slip Egg shape Sinker Mold! 1/8 & 5/16 oz. Molds! L@@K!~
Vintage Palmer#453 Slip Egg shape Sinker Mold! 1/6& 5/16 oz. Molds Offered in this auction is a Vintage C. Palmer Slip Egg Shaped Fishing Sinker Mold# 453 in great condition! It is marked 1/6& 5/16 oz and measures 8" long by almost 2" wide and is marked on the back C. PALMER MFG. INC. WEST NEWTON, PA. 15089. No reserve and a very low starting price so bid to win and make your own fishing sinkers! I have Two other Palmer's Sinker Molds and a Palmer Hot Pot listed at this time so please check them out. If you're interested in more than one, I'll be glad to pack them together so save on shipping cost. Please don’t ask how much it would be for this and that since everything is already packed up so I can give an accurate shipping cost for each. I will ship the most economical way! Please look at all the pictures as ... morethey are part of the description. EVERY PACKAGE SHIPPED VIA POST OFFICE(in the USA) WILL have DELIVERY CONFIRMATION– it is included in shipping cost. BEFORE YOU EMAIL ME AND COMPLAIN ABOUT THE SHIPPING COSTS. CHECK AND SEE IF THERE ARE OTHER OPTIONS FOR SHIPPING– I TRY TO ALWAYS GIVE A CHOICE. I HAVE A 2 DOLLAR HANDLING FEE AND THE REST IS SHIPPING COST CALCULATED BY EBAY. I LIVE IN FLORIDA AND SHIPPING COST IS CALCULATED USING YOUR ZIP CODE, WEIGHT AND DIMENSIONS OF THE PACKAGE. If the shipping cost is too high, then I would suggest that you look for a similar item from a seller that lives closer to your area. Quotes shown in eBay for heavier packages are via UPS and are NOT correct– I’ll email you an invoice with the correct cost at the end of the auction. Good Luck and Happy Bidding! And please check out the other wonderful"Treasures" I have listed on eBay by clicking on View seller's other items! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Hilts, United Sports MFG, and C.Palmer Sinker and jig molds
Various jig and sinker molds. made by Hilts. United sports MFG, and C.Palmer. The Hilts mold is a tube jig sizes 1/16 and 1/32, 6 cavity 3 for each size. There is some lead in a couple cavities that has to be melted out and the plastic covering the handles is missing. One of the split shot molds is missing the plate. 6 molds in total. Cleaned them up as best as possible. Sold as is.
|
|
|
2 C Palmer Sinker Molds No.500 Split Shot & No.201 Flat Sinker Molds
You are looking at 2 C Palmer Sinker Molds a No.500 Split Shot& No.201 Flat Sinker Molds.Look to be in pretty good condition condition. I took 4 pictures to try and show condition and what you get.PAYMENT must be received within 3 days.If you have a problem with the item after you receive it please email before you leave feedback.I would like to get a 5 star rating.We offer 100% buyer satisfaction.If you recieve your item and for some reason you are unhappy simply email me and let me know that you will be sending it back for a full refund minus return shipping.Refund will be issused after item is returned.Email me with any questions.Thanks for looking
|
|
|
Two Fishing Sinker Lead Molds model 4A8 and 151 with Lead
Two Fishing Sinker Lead Molds model 4A8 and 151 includes 20 lbs of Lead both are used but still in good working condition
|
|
|
DO-IT FISHING LEAD SINKER MOLDS ASSORTMENT OF Four (4 LEAD MOLDS)
4 DO IT LEAD WEIGHTS THESE ARE USED 8/0 SNAG MODEL RM-1438 MODEL RM-20-34 MODEL10/0 SNAG
|
|
|
DO-IT SINKER MOLD BANK 7 SPLIT SHOT MOLDS & LEAD.
THIS IS 3 DO-IT MOLDS. 1) IS A BANK SINKER MOLD. MAKES 8 SIZES. 1/8 1/4 3/8 1/2 3/4 7/8 1 1 1/2. 2) IS A SPLIT SHOT MOLD MAKES 2 SIZES 1/16 AND 1/8. 3) IS A SPLIT SHOT MOLD MAKES 2 SIZES 3/8 AND 1/4. ALSO COMES WITH A MELTING POT AND LADDLE SPOON. AND THERE IS ABOUT 20 TO 30 LB OF LEAD. ALL WORKS AND IS IN REALLY GOOD SHAPE. THE TAPE THATS ON THE HANDLES OF THE MOLDS WAS JUST PUT THERE TO KEEP FROM BURNING FINGERS THERE IS NOTHING WRONG WITH ANY OF THE STUFF. THANKS FOR LOOKING. US BIDDERS ONLY.
|
|
|
Hilts Molds 8 oz. Bullet Head Sinker Mold #BSE-3
This auction is for a Hilts Molds#BSE-3 Bullet Head Sinker Mold. It is for an 8oz. sinker. It is in good shape with no damage to the mold. Hinges or handles. NO RESERVE! Buyer pays $6.95 shipping/handling in the continental US. NO INTERNATIONAL SHIPPING! PayPal is the preferred method of payment. THANKS FOR YOUR BIDS and GOOD LUCK!
|
|
|
3 Fishing Weight Sinker Molds Cast Iron Palmer
This auction is for 2 cast iron fishing weight sinker molds. The set includes 1 Banks mold with a 8. 10, 15, 19 oz mold. 1 Palmer mold with a 1. 2, 4, 6, oz mold 1 Palmer round mold. I can't read the numbers in that mold. but it make 6 round molds. This item comes from a Non-Smoking household. All items ship within 48 hours of receiving payment. I accept paypal only. This item will ship parcel select or priority buyers choice. I also will combine shipping. All items ship with confirmation. Thanks for looking and happy bidding 7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fum.rp73%28df%3B35%3E7-13d05c22609-0xf7-
|
|
|
2- Sinker Molds 1-C.Palmer #452 & Lil Mac Midget
C.Palmer#452 sinker mold that makes 1oz. and 1/2oz. sinkers. The Lil midget makes 1-3/4oz. and 2- 3/8oz. sinkers. Note that the midget does not have handles. I used long 1/4in. bolts for handles. I have made more sinkers than I will ever use so someone else might want to make some also. Check my other listings for I am selling my melting pot and other molds also. Thanks for looking Accept PayPal only Ship U.S.A. only
|
|
|
1lbL SINKER MOLD LEAD DEEP SEA FISHING DO-IT JIG ALUMINUM MOLDS
BIDDING ON ONE ALUMINUM MOLD FOR MAKING 1# LEAD SINKERS IN GOOD WORKING CONDITION SHIPPING IN US ONLY
|
|
|
Hilts Mold 2/0 & 3/0 snag hook molds sinker mold fishing hooks
BIDDING ON ONE HILTS 3/0 TREBLE HOOK SNAG HOOK MOLD AND ONE HILTS 2/0 TREBLE HOOK SNAG HOOK MOLD BOTH IN GOOD WORKING CONDITION AM INCLUDING 5 3/0 TREBLE HOOKS WIT AUCTION SHIPPING IN US ONLY
|
|
|
Hilts Molds LMBULLET Lead Slip Sinker Mold Texas Carolina Worm Rigging Burbank
this listing includes 1 ea. 100% functional Hilts Molds LMBULLET Model Lead Slip Sinker Mold for use in molding molten lead and this type of sinker is generally associated with sinkers used for making Texas and Carolina Worm Rigging rigs. the mold is 2" X 1-1/2" X 2-1/2" in cloded position with added dimension of the handle length tou will have a mold 15-1/2" long when unfolded out. push pins included as shown
|
|
|
VINTAGE LOT OF 3 SINKER MOLDS ONE C. PALMER MFG CO, TWO UNMARKED
3 Vintage Fishing Sinker Molds#1(top) C. Palmer Mfg Co. Inc West Newton PA 15089 Flat Bank 226 Sinker Mold- 3. 4, 5* In very good condition#2(middle) Unmarked- some light pitting on outside of plate tear drop shape sinker- marked on inside of sinker 1. 2, 3, 4, 5#3(bottom) Unmarked on outside- medium depth pitting on the outside of 1 plate. Hinge opening is stiff marked on inside 362- 1.1, 3/0, 1, 3/0, 3/0, 2/0 If you have any questions please ask. If you need more photos please contact me.
|
|
|
8 Pound Finned Downrigger Weight Mold, Sinker Mold HILTS MOLDS 8# FISHING
ALUMINUM 8# FINNED DOWNRIGGER WITH EYELET SINKER MOLD GREAT WORKING CONDITION FOR MOLDING LEAD 12# SINKERS FOR DOWNRIGGING BUILT BY HILTS MOLDS BURBANK CALIFORNIA BSE-3 10 SCREW EYE SHIPPING IN US ONLY
|
|
|
10 Pound Finned Downrigger Weight Mold, Sinker Mold HILTS MOLDS 10# FISHING
ALUMINUM 10# FINNED DOWNRIGGER WITH EYELET SINKER MOLD GREAT WORKING CONDITION FOR MOLDING LEAD 12# SINKERS FOR DOWNRIGGING BUILT BY HILTS MOLDS BURBANK CALIFORNIA BSE-3 10 SCREW EYE SHIPPING IN US ONLY
|
|
|
Round Ball / Split Shot Lead Sinker Molds (2)
Lot of two sinker molds. The first mold is a C.Palmer Mfg. PM02 mold. The weight of sinkers this mold makes is unknown. But the size of ball will be exactly 7/16" diameter. The other mold is Lil Mac. Model 500. This makes 4 different shapes of split shot sinkers or round balls, which are sized 1/8" 3/16" 9/32" 11/32" Both molds are in excellent condition.
|
|
|
2 Ament Lead Sinker Fishing Molds Jig Head Tear Drop Sinker Excellent Condition
Excellent Lead Molts Jig Head& Tear Drop Sinker Only Used Once Do Not Miss Out On This Deal Look closely at the pictures. They are our best description. Thank you for taking time to look at our item up for auction. Please save us in your favorite seller list. We are constantly changing our inventory. We list items from all categories. So please stop back often. Thanks again from Back yard chicken coop sales Check out my!
|
|
|
12 Pound Finned Downrigger Weight Mold, Sinker MOLDS 12# FISHING trolling
ALUMINUM 12# FINNED DOWNRIGGER WITH EYELET SINKER MOLD GREAT WORKING CONDITION FOR MOLDING LEAD 12# SINKERS FOR DOWNRIGGING macined from aluminum on a cnc machine cpy of a ilts 12# finned downrigger weight fin comes out thicker about 1/2" total thickness 3 1/2" diamerter ball SHIPPING IN US ONLY
|
|
|
LOT 7 SINKER FISHING MOLDS UNTITED SPORTS,DO IT, PLUS
This is for a LOT of 7 SINKER FISHING MOLDS Qty. 4 UNTITED SPORTS one DO IT INDUSTRIES. One PENN SPORT, and one E.L. SWEET and in used very good condition. All hinges are good- there are NO cracks or repairs. You ger Penn Sport NO.3, E.L. Sweet& Sons no number,one DO-IT INDUSTRIES MODEL JR-8-48 JIG HEAD MOLD,and four UNITED SPORTS numbers 46,101,36,and 32. High bidder to pay shipping. U.S.A. Only!
|
|
|
ALUMINUM BANK SINKER MOLDS BKSM2- 5 MOLDS 3/4 TO 6 1/2
I have for sale a used aluminum Bank Sinker Molds BKSM2-5 molds from 3/4 to size 6 1/2. mold compartment 4" long.shows some surface residue on the aluminum. I am not an expert. Just selling.International buyers please be aware of your customs fees and regulations.I will not be responsible.Came from local Estate.IN FOUND CONDITION.SOLD AS IS.Will combine shipping when possible.Great for any collector. Any questions. Please email me. Thank you for looking.
|
|
|
ALUMINUM EGG SINKER MOLDS ESM 30- 8 MOLDS 1/2 TO 6
I have for sale a used aluminum Egg Sinker Molds ESM 30-8 molds from 1/2 to size 6. mold compartment 4 1/2" long.shows some surface residue on the aluminum. I am not an expert. Just selling.International buyers please be aware of your customs fees and regulations.I will not be responsible.Came from local Estate.IN FOUND CONDITION.SOLD AS IS.Will combine shipping when possible.Great for any collector. Any questions. Please email me. Thank you for looking.
|
|
|
5 lead molds 2 sinker and 3 jig molds do-it molds tackle craft fishing tackle
5 lead molds 2 sinker 3 jig molds there do-it bass casting mold do-it round head jig 1/32-1/2 herters-4F4 jig mold lil-mac walking sinker 1-1/2 oz hilt jig mold 1/4-1/2 oz shipping US $ 12.75
|
|
|
HILTS MOLDS 8 Ounce Weight Mold, Sinker Mold HILTS MOLDS 8# FISHING
This is a Hilts Mold for a single 8 ounce mold. It is used but in good condition. Model# LMCB-8. If you have any other questions please ask. And thank you for looking.
|
|
|
C. PALMER MODEL 104 AND MODEL 451 VINTAGE FISHING SINKER MOLDS
A pair of C. Palmer. West Newton, PA. sinker molds. The first is a model 104 mold and makes sinkers in sizes from 8, 10, 12, and 16 ounces. The second model is a number 451. This model makes egg shaped sinkers in sizes from 1/2, 3/4, 1, 2, 3, 5, and 8 ounce sizes. Both molds are in good working condition. HAPPY BIDDING! Thank you for looking at PPMAA.com and we hope you enjoy what you will find to be a ever growing selection of interesting items. Pearlman’s Precious Metals. Arts& Antiquities(PPMAA) is the estate buying division of Pearlman's Jewelers. You may know us at www.pearlmansjewelers.com. Pearlman's also has an which concentrates solely on fine estate jewelry. PPMAA concentrates on every other category of items we buy. You will. Over time, see a diverse collection of auction and store items from coins, sports, books, and ... moreyou name it for we buy a tremendous amount of just about anything interesting and historical. We carry from the common to very rare and the inventory changes daily. We invite you to ask questions on anything you see or don't. We are also buyers so if you have something interesting let us know and we would be happy to discuss. PPMAA is everything Pearlman's has been for the last 81 years, and we hope you enjoy our offerings. Bill Pearlman Please notify us with your intention of winning multiple auctions. We will combine shipping for multiple auction wins for up to five business days. Buyer will pay the greatest shipping charge in a combined group. With an adjustment for some types of items(i.e. large, heavy, fragile, or irregularly-shaped pieces) and/or large quantities of similar items should any apply. Please wait to pay until you have received a revised invoice, sent on the business day following the close of the auction. While our listings say we'll only ship within the United States. We will ship to wherever you are, pending international shipping regulations. To receive a shipping estimate. Please send us a message with the item(s) you intend to win, and your
|
|
|
HILTS MOLDS, SINKER MOLD, LMHORSE16-4 32760-575 NO.4....VGC
Sinker mold made by Hilts Molds. Burbank, CA 81602. What I can read on inside says LMHORSE 16-4, 32760-575, NO.4. OIL HINGE, USE NO. 14 SWIVEL Very nice condition.
|
|
|
4 Vintage Jig and Sinker molds Lead Lures , Ament,palmer
1 ament ikdep.mo.1/8 ounce jig mold. 1 palmer west newton pa. number 500 3 0z.Bb,4,5 and 7 oz jig heads. 1 palmer west newton pa.number 401 sinker mold 7 diffrent sizes 1 round un marked bottom sinker 3 sizes with 4 size jig jelly fise head mold. These where used in my family for years and can be used for many more.great molds.
|
|
|
Fishing-Bell Type Sinker Mold. 7 Molds.C. Palmer Mfg. West Newton, Pa.
This is a bell type sinker mold with sizes 1/4. 5/8,1/2, 1/8,1,1 1/2 and 2 oz. mold. 8 inches when closed and 15 1.2 inches long when open. Inside is clean and the outside shows surface marks. On the outside it says C. Palmer Mfg. West Newton, Pa 15089. Number 151 on handle. PLEASE READ THE DESCRIPTION CAREFULLY. SHIPPING CHARGES ARE EXACTLY WHAT THE POST OFFICE CHARGES ME. NO HANDLING CHARGE. I only accept pay pal and ship only in the United States. 90 Cents added for delivery confirmation on 1st class and media mail. PAYMENT EXPECTED IN 3 DAYS. Items COMBINED whenever possible. I used to sell with my sister racerr2 and we had over 5000 Positive feedbacks. She has given up on selling and I'm selling under the name Dancer6811. Shipping to Alaska and Hawaii might be slightly higher. Media mail shipping might take slightly longer. I try ... moreto describe my items the best I can. Both the good and the bad, but if you have a question, please email me and I will try to answer the best I can. Thank you.
|
|
|
CAST IRON TRI SINKER MOLDS --PYRAMID STYLE-NO NAME OR MARKINGS
I have for sale a used cast iron tri pyramid sinker mold- no markings or maker- mold compartment 3" long.shows some surface rust I am not an expert. Just selling.International buyers please be aware of your customs fees and regulations.I will not be responsible.Came from local Estate.IN FOUND CONDITION.SOLD AS IS.Will combine shipping when possible.Great for any collector. Any questions. Please email me. Thank you for looking.
|
|
|
DO-IT Pinch On sinker molds X2 PO-7-A and PO-4-L
here is a lot of 2 do-it sinker molds for making your own pinch on sinkers. these are a good used condition with normal signs of use. Get two for the price of one. for more details please look at the pictures and ask any questions. Thanks. all items are sold as is. Posted with
|
|
|
3 Lead Sinker Molds Palmer Slip Egg Shape Triangle
This lot of 3 lead sinker molds are in good used condiition. Firsty is maked 451- slip egg shpare- 1/2.3/4,1,2,3.5, 6, and 8 ounce, Second is also marked Palmer- it is marked 352, makes 5,6 and 8 ounce triangle weights, The third is unmarked- markes 6,8,10 ounces. Please see my other items as I will combine to save you on shipping. We are a smoke free home but we do have pets. MY SOAP BOX- Please do not leave negative feedback until you contact me. If you email me please give me a few days to get back to you. I am not at my computer every day. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Used Palmer 101 bank sinker molds 3/8 1/2 3/4 1 oz.
This used Palmer 101 bank sinker mold is in awesome shape. The mold has 8 cavaties 2 each 3/8 1/2 3/4 and 1 oz. The soot on the mold helps the finished sinker release from the mold. Posted with the
|
|
|
Hilts 8-10-12 ounce banana or mooching sinker molds no spin molds
Nice used Hilts 8-10-12 ounce mooching sinker molds banana sinker mold Thanks for looking I will ship to Canada as well Canadian Buyer pay actual shipping I am listing about 40 molds over the next couple of days. From Hilts, Palmer and Lil Mac You can combine auctions to save on shipping Probably can get 5 or more molds in a single Medium flat rate box.
|
|
|
12 VINTAGE LEAD SINKER MOLDS & CAST IRON LEAD POT LADLE
12 VINTAGE LEAD MOLDS. JIG, BANK, BAIT CASTER, EGG, SPLIT SHOT, PINCH ON, LEAD POT LADLE. GREAT CONDITION. PAYMENT WITHIN 3 DAYS OF SALE. SHIPS TO LOWER 48 STATES ONLY. PAY PAL ONLY. BE SURE TO CHECK OUT MY OTHER LISTINGS. THANKS LCBSHOPPER.
|
|
|
3 Li'l Mac Cannon Ball Fishing Sinker Molds 12 oz 16 oz 40 oz 64 oz
Will ship to USA only. Paypal only please. This auction is for 3 Li'l Mac Cannon Ball sinker molds. They are model A1192- 12oz. 16oz. Model A1140- 40oz. and model A1164- 64oz. They take H-0001 handles which are missing. They each have a spring clip to hold them shut. Except for the missing handles they are in very good condition, the insides look almost like new. Please see pictures and email any questions. Thank you for looking.
|
|
|
DO-IT Egg slip Sinker Molds - See pics NR Cabela's - 3 mold lot jig wobble
DO-IT Egg slip Sinker Molds- See pics NR Cabela's- 3 mold lot What you see is what you will get! Let me be clear* I'm not a fisher man I don't know much about these: 1 with no handle looks like a fish inside 1 Do it says 1/2 egg slip sinker mold EB-9-a brand new I think. 1 Cabels wobble jig assorted sized model cwj- 4 LOWER 48 shipping only! any questions just ask No reserve and low starting bid!
|
|
|
vintage Palmer sinker molds 451 ( egg shape) CLEAN CONDITION - use or collect
offered for sale is a vintage Palmer sinker mold. The model number is 451( egg shape) The mold is marked Palmer 451 and is an egg shape sinker mold. You can make 8 different egg sinkers of various weghts at a time The mold was used but remains solid and clean. This has not been used in a long time and would make a nice addition to a collection or personal use. I think the mold is cast aluminum but not 100% positive on that. Pic's show exactly what you are getting 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13dde908926-0x104-
|
|
|
TWO DO-IT LEAD MOLD BANK SINKER BK-4-L 4 CAVITY & BK-8-A 8 CAVITY 2 MOLDS
WELCOME TO BIRDTOWN ANTIQUES WE ARE A REAL LIVE BUSINESS WITH A REAL STORE WE SELL ANTIQUES. VINTAGE, COLLECTABLES, UNUSUAL, USED, USABLE AND SOME NEW ITEMS. WE LIST SOME ITEMS THAT WE HAVE IN OUR STORE. IF THE ITEM GETS A BID. IT IS COMMITTED TO SELL ON EBAY. IF THE ITEM DOESN’T HAVE A BID AND SOMEONE WALKS INTO MY STORE AND WANTS THAT ITEM. ITS THEIRS. I PAY TAXES ON THE ITEMS I SELL. THEREFORE I COLLECT TAXES ON THE ITEMS I SELL. EBAY BUYERS PAY TAX ONLY IF THEY’RE A NEW YORK RESIDENT. IF YOU’D LIKE TO SEE MY TAX ID NUMBER. I WILL GLADLY GIVE IT TO YOU. TWO DO-IT LEAD MOLD BANK SINKER BK-4-L& BK-8-A SEE BELOW Description SELLING BANK SINKER BK-4-L SIZE: OZ. 2. 3, 4, 5 BK-8-A SIZE: 1/8. ¼, 3/8, ½, ¾, 7/8, 1, 1 ½. BOTH USED BUT GOOD WORKING. Any questions, ask. Payment Please do not make payment until an invoice has ... morebeen sent by me. Applicable New York State Sales Tax will apply to all shipments sent to a New York State address. Please make payment within 2 days. Shipping Items shipped within 1 business day. THE PHOTOS ARE ALWAYS THE REAL DEAL. NEVER EBAY STOCK PHOTOS. Glad to combine shipping. Thank you
|
|
|
Vintage 12 Lot Lead Fishing Sinker Molds Palmer,Ament,Do-It,Hilts,Lil Mac Midget
ITEM DETAILS 3 Lil Mac Midgets. Wilsonville,Oregon 4 Ament.Independence,Mo 1 Hilts. Burbank,Ca. 2 C. Palmer.West Newton,Pa. 2 Do-It.Denver,Ia. All in good or better used condition. See pictures below. We sell all items"as is" and state the condition as accurately as possible but is our opinion and post pictures for your assessment of condition. Shipping quotes are for the contiguous 48 states.Hawaii. Alaska, and Puerto Rico please contact us for shipping quotes. U.S. shipping only. We ship Monday-Friday. Seems buyers are not checking their emails for shipping date and tracking numbers. We notify all buyers through their email addresses with shipping date and tracking numbers. PLEASE CHECK AFTER PAYING FOR AUCTIONS. We try our best to ship all items safely and securely.Please contact us if there is a mistake in our descriptions as ... morewe are not experts in all our items listed.We will also try to resolve any problems with any items so please contact us before leaving any negative feedback.Thank you for looking at our auctions and good luck bidding.Payment due by 3 days of end of auction after which items are no longer for sale and unpaid item dispute will be filed and item will be relisted. Buyers must notify seller of returning items. Returned items must be shipped within 14 days of receipt with tracking numbers and insurance if originally shipped with. Buyers are responsible for return shipping charges.
|
|
|
2 Homemade molds Flea Fly type Jig Sinker Molds Fishing Weights Mold lead
You are bidding on. 2 Homemade molds Flea Fly type Jig Sinker Molds Fishing Weights" Used. Looks ok. Untested. Came from my Uncles Estate. Appear to be possibly 1/32- 3/32? in size. Sold as is. Shipped via USPS. Please complete checkout within 5 days. SOLD AS-IS. ALL SALES ARE FINAL. Items ship within two business days after payment is received. Please allow at least 4 to 14 business days for your item to arrive. Thank you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of 7: Horrocks-Ibbotson Sinker Molds: Fishing Lead Weights: Herter's & Hilts
This lot consists of 7 old vintage fishing lead sinker molds. Which appear to be in nice used condition. Two of the molds are unmarked, one is marked Herter's Inc. model# 4G1) one is marked Hilts(model# CGZ-M) and three are marked Horrocks-Ibbotson(models: 2J with original box and two 1J) All have come from an avid fisherman's house. Please refer to the visuals for detailing. Shipping on this lot is $20, which includes insurance. Payment is expected within 5 days of auction close. Please feel free to ask any questions. Thank you for your time and have a great day, Laury. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3B4553g%3E-13df9a5a203-0x100-
|
|
|
3 EGG TRIANGLE SINKER BAIT MOLDS; 2 PALMER (No. 600 & 351) AND H-11A LEAD WEIGHT
3 EGG TRIANGLE SINKER BAIT MOLDS; 2 PALMER(No. 600& 351) AND H-11A LEAD WEIGHT MOULD INSIDE THE PALMER 600 DIE IT SAYS“2& 4” THE PALMER 351 DIE MAKES VARIOUS TRIANGLE SIZES 1-5. THE H-11A DIE MAKES VARIOUS EGG SIZES 1/8 TO 1. THERE IS A SMALL MELTING POT INCLUDED. BUT I NOTICED AFTER TAKING THE PICTURES THAT IT HAS A THIN SPOT WITH SOME CRACKS IN THE BOTTOM– VALUE IT ACCORDINGLY.
|
|
|
2 OLD lead sinker molds/ 1 marked C Palmer West Newton PA/ 1 unmarked
hey now 2 old molds 1 marked C PALMER WEST NEWTON PA No 351 capacity of 5 pyramid sinkers 1 unmarked capacity 5 rounded"teardrop" shape sinkers with wieght marks own it-go fishing f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e20197c41-0xfb-
|
|
|
(2) DO IT EGG SINKER PRODUCTION MOLDS
2JERKBAITS HANDMADE JIS. TACKLE, AND MORE THIS LISTING IS FOR(2) DO IT BRAND EGG SINKER PRODUCTION MOLDS(1) MOLD MAKES SIZES 1/8 OZ AND 1/4 OZ(7) OF EACH(1) MOLD MAKES SIZES 3/8 OZ(5) AND 3/4 OZ(4) THEY ALSO COME WITH(2) BRAND NEW PULL PINS. I NEVER USED THEM. I USED PIECES OF WIRE COAT HANGERS BECAUSE OF THE AMOUNT I WAS MAKING IT MADE IT FASTER. THE DISCOLORING ON THE ONE MOLD IS FOR THE OIL I PUT ON THE HINGES TO KEEP THEM FROM WARPING AND BREAKING. I GUESS I MUST HAVE PUT A LITTLE TOO MUCH ON THAT ONE BUT IT DOES NOT EFFECT IT IN ANY WAY. THESE ARE IN HARDLY EVEN USED CONDITION THESE IS SOME WEAR ON HANDLES BUT THAT IS IT THESE MOLDS WORK PERFECT IN EVERY WAY AS THEY SHOULD IF YOU WOULD BUY THEM NEW. THESE MOLDS ARE $45.15 EACH NEW FROM DO-IT SHIPPING IS FOR U.S SHIPPING THERE WILL BE ADDITIONAL SHIPPING FOR HI. AK, AND CANADA SHIPPING ... moreTHANKS FOR LOOKING AND HAPPY BIDDING! PLEASE CHECK OUT OUR OTHER LISTINGS WE WILL GLADLY COMBINE SHIPPING! PLEASE WAIT FOR UPDATED INVOICE BEFORE PAYING!
|
|
|
HILTS CANNONBALL SINKER MOLDS 16 OZ. AND 24 OZ. w/100 brass eyelets
2 Hilts Cannonball Molds– 16 oz. and 24 oz. with 100 brass#2 eyes in good condition. Slight chip at the end of handles.
|
|
|
4 old sinker & JIG molds from an estate Li'l MAC Brand NICE CONDITION
4 old sinker& JIG molds from an estate Li'l MAC Brand NICE CONDITION The high bidder will win 4 old sinker& JIG molds from an estate. Li'l MAC is the Brand Name on all the molds- NICE CONDITION. The molds are marked Li'l Mac 510 LG spit shot- this mold has rubber grips that look to be replacement grips Li'l Mac JM BE-2 2 oz bell sinker I think Li'l Mac midget.22-1/2 635 4/0 Li'l Mac midget24 1/8- 1/4 570- 1/0 These mold appear to have very little use and are clean and ready to use or collect Photos show exactly what you are gettting PayPal is the primary paying method that I accept. eBay allows me to accept other payment methods only under special circumstances that follow their guidelines. No PayPal? Email questions that you may have. No RESERVE ALL BUYERS: I will send the EBAY invoice to you very soon after ... moreeach auction closes-usually within an hour. PLEASE EMAIL a return message from the checkout email from EBAY so I know you have the information for your purchase. Payment methods available: Credit card payment using PayPal(their web address is www.paypal.com) Payment is expected within 2-3 days of auction close.
|
|
|
6 old sinker & JIG molds from an estate PALMER & Hilt VERY OLD MOLDS
6 old sinker& JIG molds from an estate PALMER& Hilt VERY OLD MOLDS There are 9 pictures The high bidder will win 6 old sinker& JIG molds from an estate. The brand names are PALMER& Hilt-these are VERY OLD MOLDS. The palmer molds are marked Model 2505 Ball Jig 1/16. 1/8, and 1/4 oz Precision sinker mold C. Palmer MFG INC 125 1/2. 3/4, 1 oz# 15089 NO 301 Sinker mold 175 sinker mold 175 with large wood handles(no other marks at all) Hilts LMBN 3 Jig Head mold- VERY VERY OLD Photos show exactly what you are gettting- I have never used any of these lead molds. These all came from an estate sale in my area and you are buying them as is and as found. PayPal is the primary paying method that I accept. eBay allows me to accept other payment methods only under special circumstances that follow their guidelines. No PayPal? Email questions ... morethat you may have. No RESERVE ALL BUYERS: I will send the EBAY invoice to you very soon after each auction closes-usually within an hour. PLEASE EMAIL a return message from the checkout email from EBAY so I know you have the information for your purchase. Payment methods available: Credit card payment using PayPal(their web address is www.paypal.com) Payment is expected within 2-3 days of auction close.
|
|
|
HILTS MOLDS SINKER MOLD VERY OLD SIMILAR TO BULLET MOLD SMALL SINKERS MAY BE 1/4
HILTS MOLDS SINKER MOLD VERY OLD SIMILAR TO BULLET MOLD SMALL SINKERS MAY BE 1/4. MADE A COUPLE OF RUNS WITH THIS WORKS GREAT. YOU HAVE TO HEAT THE MOLD ALSO.
|
|
|
C. Palmer MFG Round Head Jig Sinker Mold #561 Makes 3 Sizes (6 Molds Total)
Up for Auction C. Palmer MFG Round Head Jig Sinker Mold#561 Makes 3 Sizes(6 Molds Total) USA Made as pictured above. Mold in Excellent condition! Make Your Own Sinkers! Please refer to photos. 6 Cavity Mold- 1/4oz. 3/8, 1/2 2 of each size for a total of Six Sinkers. if you have any questions regarding this item please ask, Thank you for looking& good luck!
|
|
|
Lot of 3 Herter's Jig & Sinker Lead Molds Models 4A1, 4A2, & 4F2. Ex. Condition.
This is a lot of three Herter's Inc. lead molds. These molds are in excellent condition with no breaks or cracks. The handles are tight and the hinges move easily. Model 4A1 makes 7 different sizes of squeeze on weights. I would estimate the sizes range from 1/8 oz to 3/4 oz. Model 4A2 makes 8 difference size Bank Sinkers. I would estimate the sizes range from 1/4 oz to one ounce. Model 4F2 makes three 1/4 oz Bullet Jig Heads in one pour. Shipping weight will be 3 lb from zip code 33177. You can choose between a Priority Flat Rate Medium Box for $12.35. Anywhere in the 50 states, or if you are located close to Miami, FL you can save on shipping costs by choosing USPS Parcel Select. Contact me if you want me to compare USPS Parcel Select rates to the Flat Rate Box rate. For example, if you are located in South Florida, Parcel Select would ... morebe a little more than half the Priority Flat Rate Box rate)
|
|
|
5 SINKER MOLDS - 4 cannonball + 1 spin - one money & PRICED TO SELL
Got these from an estate sale and I am selling them all for one low price. As you can see from the pictures the previous owner installed either wood or plastic extensions to the molds and are suspect in that a few are coming loose. I would trash them and favor for the regular method but I don't make sinkers and maybe the longer handles are the way to go. From left to right are the following: Palmer 1 pound cannonball. Li'l Mac 32 oz cannonball, Spin 4 0z that looks new and still has the $ 15.99 price tag, Li'l Mac 8 oz cannonball and finally a L'il Mac 12 oz cannonball[ it has the plastic pipe handle] All for one low price. Please email for an y additional question s and or payment options. Thanks for the interest and good luck.
|
|
|
3 DO-IT MOLDS, SINKER AND JIGS, hardware included
3 do it molds Bass bullet jig Pencil sinker mold Wacky head jig Included is 400 eyes for pencil sinkers A few hooks for bass bullet Around 100+ hooks for wacky head size 2& 6 Many weed guards for bass jigs Pins for bullet jigs Cleaning out the shop and all these have very little pours across them. No international shipping I will combine shipping but wait for invoice Prompt payment is requested and will be rewarded with freebies.wink. Posted with
|
|
|
10 LI'L MAC Casting Sinker Molds with 1 Cast Iron Lead Melting Ladle
10 Assorted LI'L MAC Casting Sinker Molds with 1 Cast Iron Lead Melting Ladle These molds are in good condition. On eight of these molds there is an extra wooden handles mounted to them. There is a# 250- B.S. 14. 640- SPN- 5 oz. 620- Spin- 3 oz. 630- Spin- 4 oz. 700 Pencil 3/16, 1108- Cannon Ball 8, 1106 Cannon Ball 6, Midget Cannon Ball#5, Midget Surf# 2- 03-2 oz. Midget 05- 3/16- 1/4, and a cast iron melting ladle. There is some wear and tearand stains on the sinker molds and the ladle is rust but solid. See pictures. Thank you for looking! Powered by The free listing tool. List your items fast and easy and manage your active items. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e64761a00-0xfc-
|
|
 |