|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States The Connecting Tube used to join the Top section and Butt section of fishing rod.
Buy It Now
$9.45 Shipping Condition: New Location: Linden, United States The colors available are pictured. These foams are 1 1/4" OD 17" long with 3/8" ID and have a hardness of 60 degree. #96-102 are 1.5" OD with 5/8" ID. ... moreIf the butts are in the picture then you must use drop down to select the corresponding number and it will say (Butt).
$9.95 Shipping Condition: New Location: Linden, United States Aluminum Fighting Butts.
Buy It Now
$4.45 Shipping Condition: New Location: Linden, United States These sets are 13 total pieces and have 3 different size tip 4, 4.5 and 5 for 4-6wt fly rods. Stripper guide rings are Titanium Oxide material. You will ... morenot find any of these colored guides like these in this size set anywhere.
Buy It Now
$9.45 Shipping Condition: New Location: Linden, United States
$4.45 Shipping Condition: New Location: Linden, United States 50 Hook Keepers. for one low starting price.
$15.45 Shipping Condition: New Location: Linden, United States The rear is solid and 1.5" long, mid is 2" long and fore is 1.5" long and all have 3/8" ID.
Buy It Now
$8.95 Shipping Condition: New Location: Longwood, United States The CRB Core Hand Wrapper was specifically designed to help anglers build a foundation in rod building. SINGLE SPOOL THREAD CARRIAGE. ADJUSTABLE ROD STANDS.
$34.95 Shipping Condition: New Location: Linden, United States They were used with handles to extend the length. These will need to be cleaned up to shine and are very nice little light blanks.
Buy It Now
$9.45 Shipping Condition: New Location: Linden, United States This is for chuck only and not the stand in the picture. Fuji Chuck.
$34.95 Shipping Condition: New Location: Linden, United States They were used with handles to extend the length. These will need to be cleaned up to shine and are very nice little light blanks.
Buy It Now
$9.45 Shipping Condition: New Location: Linden, United States .50 Caliber rear grip.
$9.45 Shipping Condition: New Location: Linden, United States These will have inserts already glued in place.
Buy It Now
Free Shipping Condition: New Location: China We will help you to solve the problem. We will do as we promised for you.
Buy It Now
Free Shipping Condition: New Location: 朝阳区, China Strong and durable, suitable for both saltwater fishing and freshwater fishing. Help you save your cost and energy. 【Multiple Sizes Rod Repair kit】. Repair ... moreyour rod quickly and easily wherever you are with the Rod Tip Repair Kit.
Buy It Now
Free Shipping Condition: New Location: Nampa, United States Batson Enterprises Rod building hand wrapper This wrapper sure beats building"V" blocks or making a wrapper out a box. Wrapper has a sliding ... moreblock to direct the thread. A unique tension device. Has metal studs to be used with rubber bands to add tension to your blank for ease of wrapping. Great buy and we have plenty in stock. About Us: The most important person involved with a transaction is you and will always be you. We are a full service fly shop who has been helping folks have a better time on the water since 1994. We are very aware who makes our success possible and we do not take this for granted. We want to be there for the good times on the water and if the times are not so good we will be there with plenty of advice. Most reels we sell are with free fly line and backing. This is not some cheap line but the best and we professionally rig your reel so it fishes right. We offer a trade in program that helps you update your rods and reels that is difficult to match in the industry. If you need help planning your trip we can help you select the right flies with the right equipment. After the big purchase is made we do not leave you in the dark if that unforeseen accident happens. We will do all we can to solve those warranty issues. Our fly fishing classes are some of the best taught by anglers who love to fish and teach others to enjoy this quiet sport. The best part about the time spent with us is that it is free. I want you to spend money on new equipment not to learn the sport. SHIPPING TIMES AND POLICY: Most items we have in stock and can ship within three business days. Few times the item has to be ordered and we will let you know so your timetable is met. We ship worldwide and will charge exactly what it cost us to ship your item. If you have any concerns about shipping cost or times please contact me. OUR PRODUCTS and OUR STORE: We have moved into our new 5700 square foot facility two years ago and we carry the products I know you want from the best manufacturers in the business. We can cus
$10.95 Shipping Condition: New Location: Linden, United States
Buy It Now
$29.95 Shipping Condition: New Location: Linden, United States Rainshadow Blanks. All of the Special Carbon Blanks are discontinued.
$24.75 Shipping Condition: New Location: Linden, United States
Buy It Now
$9.45 Shipping Condition: New Location: Linden, United States Turbo sets consist of 14pcs sizes 25, 20, 16, 12, 10, 10 ,10 ,10 8 and tip sizes 10, 11, 12, and 14. OEM Guide sets.
$9.45 Shipping Condition: New Location: Linden, United States Fly Grip Set.
$10.95 Shipping Condition: New Location: Linden, United States
Buy It Now
$4.00 Shipping Condition: New Location: Lindenhurst, United States
$10.95 Shipping Condition: New Location: Linden, United States
$9.45 Shipping Condition: New Location: Linden, United States
$10.95 Shipping Condition: New Location: Linden, United States Plastic Containers.
$9.45 Shipping Condition: New Location: Linden, United States
Buy It Now
$9.45 Shipping Condition: New Location: Linden, United States They are NCP Size "A" and "D" 1-4oz spools. 1-4oz threads.
Buy It Now
Free Shipping Condition: New Location: China Portable Fishing Rod Building Winding Machine, Professional DIY Elctric-Drive Fishing Rod Tool Adjustable 0-50RPM USB Interface. Stand lift: Yes. Rotational ... morespeed: 0-50RPM.
Buy It Now
Free Shipping Condition: New Location: China Aluminum Ring and Carbon Tube Cap for Long Nut FUJI 16# Reel Seat ,price NOT include reel seat or nut. Carbon Tube color:Gold Thread Carbon Tube/Red Thread ... moreCarbon Tube/Blue Thread Carbon Tube/3K Carbon Tube/Silver Carbon Tube.
Buy It Now
Free Shipping Condition: New Location: Nampa, United States
Buy It Now
$2.99 Shipping Condition: New Location: China Text Text Text Text Text.
$12.95 Shipping Condition: New Location: Linden, United States
$34.95 Shipping Condition: New Location: Linden, United States These are 59-71" long with various butt and tip sizes. These will have scratches and marks on them. They are dirty and need good cleaning. These could ... morebe blems or seconds and may have slight bend or broken tip from being bundled up together for years.
$29.95 Shipping Condition: New Location: Linden, United States These are 61" long with butt size. 475 and looks like 7 tip. These will have scratches and marks on them. They are dirty and need good cleaning. These ... morecould be blems or seconds and may have slight bend or broken tip from being bundled up together for years.
$9.45 Shipping Condition: New Location: Linden, United States The grip is Camo Pattern foam and rear is 2.5" long with tenon and Burl Cork butt cap, mid is 2" long with a 1.5" fore grip and all have a 3/8" ID.
Buy It Now
$5.40 Shipping Condition: New Location: Osceola, United States This is a surplus Thread Tensioner. It works perfect for wrapping guides on fishing rods. This auction is for one Tensioner. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-148e316427f-0x113-
Buy It Now
$8.85 Shipping Condition: Used Location: Tuckerton, United States gudebrod rod wrapping thread. size D. 575 yard spools.
Buy It Now
Free Shipping Condition: New Location: China All sizes Set Fishing Rod Guide Tip Top Eye Rings Kit for Repairing. High quality stainless steel and ceramic material, corrosion-resistant, sturdy and ... moredurable. Boxes are not included.
Buy It Now
$6.00 Shipping Condition: New other (see details) Location: Corpus Christi, United States Item specifics are listed below. -Size D NCP Pro 1oz spools have 300yds per spool. -Size C NCP Pro 1oz spools have 450yds per spool. -Wood is for wooden ... morespools and they should have a minimum of 300yds of thread on each for NCP size D variations.
Buy It Now
$9.45 Shipping Condition: New Location: Linden, United States They are 2" long with a. 780" ID. colored fighting butts.
Buy It Now
$5.55 Shipping Condition: New Location: Waianae, United States Fuji Ultra Poly™ NOCP requires no Color Preserver to maintain its color. After extensive testing and close work with one of the world’s largest thread ... moremanufacturers, Fuji and Anglers Resource have developed a unique wrapping thread made of a specialized polyester that accepts finish beautifully and resists UV, aging and abrasion better than Nylon.
Buy It Now
Free Shipping Condition: New Location: Fort Worth, United States No fishing pole parts included in this kit for example fishing rod tip eyelets,this kit only contains supplies.
Buy It Now
$4.25 Shipping Condition: New Location: Pennville, United States Size 5.0 (2.0mm) recoil, tarnished, dark color. Size 5.5 (2.2mm) standard loop, gold color.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 8' Cork Tape for Grip making. 8 feet - enough for a approx 30" grip. peel and stick.
Buy It Now
$4.25 Shipping Condition: New other (see details) Location: Littleton, United States
Buy It Now
$4.15 Shipping Condition: New Location: Waterbury, United States This size clamp will hold even large saltwater guides down to the small fly rod sizes. Fishing Notions. For size reference the beads are approx. The bands ... moreare black, brown and blue in color and are randomly mixed.
Buy It Now
Free Shipping Condition: New Location: Rochelle Park, United States It enhances that "cork feel.". It toughens the cork to aid in the prevention of sloughing and chipping of the cork surface. Cork Seal is designed to seal ... morethe surface of cork rod handles. Cork Seal soaks into the cork and seals in depth.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 8' Cork Tape for Grip making. 8 feet - enough for a approx 30" grip. peel and stick.
Buy It Now
Free Shipping Condition: Used Location: Cass City, United States This listing is for 8 Fuji Speed Grip Rod Building Wrapping Vintage Pistol Trigger Grips Handles. Please refer to all photos for more details as they ... moreare the best part of the description. Photos are of the actual items that you will receive.
Buy It Now
$3.95 Shipping Condition: New Location: Longwood, United States CRB Micro Guide Tubing is the fastest and easiest way to hold micro guides in place. The tight fit and a slim design make wrapping up the guide foot a ... morebreeze.
Buy It Now
Free Shipping Condition: New Location: Rochelle Park, United States Model Color Length OD ID. JW-EFG7-BKCAM Black 7" 1.16" 0.5". JW-ERG15-BKCAM Black 15" 1.16" 0.5".
Buy It Now
$3.95 Shipping Condition: New Location: Longwood, United States ProWrap's new Tiger Thread provides a "fierce" new option for rod builders. This thread is a nylon twist available in 7 different color options.
Buy It Now
Free Shipping Condition: New Location: Nampa, United States Ten folding hook keepers. Ideal for fly rods but can be used for other types as well.
Buy It Now
Free Shipping Condition: New Location: Streamwood, United States The Ozark Trail Black Rod Tip Repair Kit has what you need for quick fishing rod repair so you can get back to fishing. Accidents happen and this repair ... morekit allows you to fix a broken rod tip at the waters edge and quickly get back to fishing.
Buy It Now
$6.00 Shipping Condition: New Location: Midway City, United States 1pc Custom Deck Hand Fishing Rod Turk Head For Rod Building. Condition is "New". Shipped with USPS Priority Mail.I can do any colors you want ( available ... moreon silver and white both which were out of stock everywhere) , place an order and please give me a message to tell me your colors. I WILL MESSAGE CUSTOMERS FOR THE COLORS AFTER CUSTOMERS PAID WHEN CUSTOMERS FORGOT TO TELL THE COLORS. IF CUSTOMERS DON’T RESPOND TO MY MESSAGES I WILL SEND THE BLACK COLOR TO CUSTOMERS AS RANDOM COLOR. The turk head is using for the rod that custom made deckhand style. We use it to cover the grips or handles end ( cord , cork , heat shrink... ) and match the color of thread of the custom rod.
Buy It Now
Free Shipping Condition: New Location: Bordentown, United States Suitable for Spinning Rod. High Quality Composite Cork not Cheap Foam Inside. Durable Graphite Reel Seat. Good Choice for Rod Building or Rod Repair.
Buy It Now
$9.45 Shipping Condition: New Location: Linden, United States
Buy It Now
Free Shipping Condition: New Location: 朝阳区, China Fit for saltwater fishing and freshwater fishing. 【 HIGH QUALITY MADE BY 9KM 】 Top Quality Stainless Steel and Ceramics Rod Guides. Wonderful tools for ... morefishing lovers.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Material: Stainless Steel & Ceramic Color: Black Quantity: 80Pcs Box Size: Approx. 13 x 6.7 x 2.3cm / 5.1 x 2.6 x 0.9in Note：To avoid damaging fishing ... morerod，the guide ring needs to be larger（+0.2 ~ 0.5mm） than the outer diameter of the fishing rod. Feature 80Pcs fishing rod guide in 10 different sizes. With stainless steel frame and wear-resistant ceramic ring, sturdy and durable. Smoothest rod guide will greatly reducing the chance of damage to your fishing line. Ideal for anyone who loves fishing DIY Package Included: 80pcs x Fishing Rod Guide Tips.
|
|
|
|
RodCrafters Journal Volume 13 Jan-Dec 1987 Rod Building Fishing Magazines
RodCrafters Journal January to December 1987 Add these great journals to your collection or start a new one! RodCrafters Journal Six issues include January-February 1987(Volume 13#1) March-April 1987(Volume 13#2) May-June 1987(Volume 13#3) July-August 1987(Volume 13#4) September-October 1987(Volume 13#5) and November-December 1987(Volume 13#6) Published Bi-monthly in Allentown. Pennsylvania U.S.A. Very good condition with no missing pages. Binding intact, no tears or holes, and with some minor yellowing on outside covers, a few dogged edges, and some tiny indentation marks on a few pages of one of the journals Backs of issues have glue residue where mailing label once was RodCrafters Journal is the oldest rodbuilding publication. Founded and published by the RodCrafters organization until they merged with the Custom Rod Builders Guild, who ... morenow publish the Journal on a quarterly basis Topics include Wrapping Tips and Tools. Weaving, Finishing Problems Traced, Rod Personalization, Water Based Problems, Inlay or Patterns, and so much more Measures 8 3/8" tall and 5 3/8" wide Free media mail shipping included with one business day handling time for faster shipping Payment is expected within three days after auction ends or immediately with a Buy It Now. Feel free to ask questions. Thank you for your interest! PLEASE NOTE: Items are described as accurately as possible so before you bid please read descriptions thoroughly and examine photos carefully To send item as a GIFT to another address. Log in to your PayPal account, click on Profile. And under“Quick Links” click Update Street Address. Click on Add Address. Enter gift recipient address, and click Save. When you make your PayPal payment. Click on Edit and select gift recipient address. If you would like a gift card included at no extra charge. When purchase is made add a note to Seller with exact message you would like written on the card. For Non-payment after 4 days from bidding end an Unpaid Item Case is opened automatically via eBay P
|
|
|
Vintage Flex Coat Step by Step Rod Building Guide, Fully Illustrated
Vintage Flex Coat Step by Step Rod Building Guide. Fully Illustrated
|
|
|
Rod Building Equipment Machine Dayton Motor 1/15 HP workstation fly tying
Whole setup to get you on your way to rod making. The equipment is in excellent condition and was well maintained. Dayton motor 2MO66. Good craftsmanship in making the wooden parts. Equipment is very heavy.
|
|
|
Fishing Rod Building Equipment - Rod Wrapper, Rod Chuck, & Drying Motors
FlyMasters of Indianapolis | | Fishing Rod Building Equipment CONDITION This item is classified as USED. I would further grade this equipment as being in EXCELLENT condition. All of the photos used in this ad were taken by FlyMasters personnel and are of the rodbuilding kit shown in this ad. DESCRIPTION This auction is for a lot of fishing rod building equipment. The equipment includes: Hand Rod Wrapper 2 Drying Motors w/Stands The Rod Chuck by Streamside Designs The rod wrapper includes 2 adjustable tension devices for proper thread feed. The notches are felt-line. One of the drying motors is rated at 16rpm. While the other is rated at 4rpm. They are clearly identified on the bases. Both motors work. The Streamside Rod Chuck is designed to easily. Accurately, and securely hold a whole rod, the butt section, tip section when used in conjunction ... morewith a motor and rod turning support stand. FlyMasters TradeUp Program Who We Are Our mission at FlyMasters of Indianapolis is to provide the finest service. The best equipment, and world-class experience for the sport of fishing. Now in our second year on eBay it has been our pleasure to bring our standards to hundreds of new customers on 6 continents and in 28 countries all over the world, as well as all 50 U.S. states and all Canadian provinces. We are beginning our 23rd year in the fishing business and appreciate the opportunities that we have had to serve our customers. Those opportunities. Both in-store and eBay, have advanced our mission to be the best fishing store in the world. We are a no boundaries fishing store. Though we enjoy the sport of fly fishing the most, we promote and give service to all tackle. We are committed to the growth of sport fishing whether it is fly, conventional, or the place that most of us started, a worm on a hook! Bid and buy with confidence and know that you are dealing with a group of fishing professionals. The same service. Equipment, and expertise that we have provided to the fishing community in Indianapolis is now being offered
|
|
|
ice fishing rod parts, rod building supplies
this auction is for 11"ice rod" parts. they are all in need of repair. Or to be taken appart and use to fix other fishing rods. they range in length from 13" 32" there are no complete"ready to use" rods in this lot. some may only need a tip top or regular guide on them to work. one price gets all. look at picture for more info and good luck bidding.
|
|
|
Advanced Custom Rod Building by Dale P. Clemens-1978-Fishing-RodCrafters Journal
Advanced Custom Rod Building by Dale P. Clemens(editor/publisher of RodCrafters Journal) Copyright 1978. Winchester Press. First Edition. 16th Printing. Book is in Acceptable condition with dust jacket. Jacket is worn and chipped but intact. The book has been well protected by the jacket and is still bright with embossed title on spine. The text block. While solid and tight, is beginning to separate from the spine. There are no loose pages(as stated, binding is tight) but there are a few places where the text block has been'broken' at the interior hinge, exposing the binding glue. Aside from some minor foxing(discoloration from age and acidity of the paper) the pages are clean and free from tears or marks. This is a good book with plenty of life left in it. See photos for details. I ship quickly. Often the same day. See my feedback. ... moreUnless I have misrepresented an item. Returns will be subject to a 10% restocking fee. Please understand this fee is necessary to recover the costs of processing non-Buyer Protection related returns.
|
|
|
VINTAGE HERTERS NO 29 FISHING ROD GUIDE WRAPPING TYING VISE BUILDING TOOL USA EX
FOR YOUR CONSIDERATION IS A VINTAGE HERTER'S NO. 29 FISHING ROD GUIDE WRAPPING VISE MADE IN THE USA. THIS VISE IS USED AND IN EXCELLENT CONDITION. DON'T LET THIS ONE GET AWAY!
|
|
|
Flex Coat Step by Step Rod Building Booklet MINT Condition
This auction is for a Flex Coat Step by Step Rod Building Booklet. It is in LIKE NEW/MINT Condition. Shipping is free and Payment is due within 48 hours of end of auction. Check out my other auctions. Please fee free to ask any questions. Thank you and good luck.
|
|
|
Orvis Building A Graphite Rod Manual from an Orvis Rod Making Kit
Orvis Building A Graphite Rod Manual from an Orvis Rod Making Kit The manual is in nice condition. It has some light creases and a little tanning to the pages from age. International users. Please request a shipping quote before bidding(please note I do not ship to certain countries) I do not accept returns. So please view pictures and descriptions. Feel free to contact me with any questions you may have. Shipping will be completed within 2 business days after receiving PayPal payment. Delivery confirmation will be included on all orders. Thank you for viewing and bidding on this item. Feel free to view my other random items I have listed. Thanks. Mike Normal 0 false false false EN-US X-NONE X-NONE k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f9c297248-0xfc-
|
|
|
Orvis Building A Glass Rod Manual from an Orvis Rod Making Kit
Orvis Building A Glass Rod Manual from an Orvis Rod Making Kit The manual is in nice condition. It has some light creases and a little tanning to the pages from age. International users. Please request a shipping quote before bidding(please note I do not ship to certain countries) I do not accept returns. So please view pictures and descriptions. Feel free to contact me with any questions you may have. Shipping will be completed within 2 business days after receiving PayPal payment. Delivery confirmation will be included on all orders. Thank you for viewing and bidding on this item. Feel free to view my other random items I have listed. Thanks. Mike Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
fishing rod building supplies tip guide parts
this auction is for alot of 20"guide tip" parts. they came from store return BROKEN rods. they range in length from 27" 37 1/2" long. they all have the tip top guide on them as well. will work great for crafts. To make custom pack, kayak, ice fishing rods out of, or to repair other fishing rods. just add you reel seat, and grips to make your own rod. one price gets all. look at picture for more info. thank you for looking and good luck bidding.
|
|
|
51 Issue Collection of RodCrafters Journal Full of Rod Building Tips
51 issues of RodCrafters Journal published and edited by Dale Clemens. Custom rod builder and author. Includes Volumes 9-17, 1983-1991, except for 3 issues. This collection is full of tips and useful information on fishing rod building, repairing and customizing. They are in good used condition with some wear from being read and referenced. Will be shipped in a Medium Flat Rate Box by Priority Mail. Paypal only please and. Sorry, no international shipments.
|
|
|
Penn Reel Manuals/Rod Building Manual
My uncle passed and left me his collection of fishing gear. I don't know a lot about fishing. But will give the best description I can. Ask questions if needed and I will do my best to answer them. I sold a lot of the collection last year and will finish this year. Check my other items. Needlesstosay. I purchased manuals to help. Here are three Penn reel manusla on instruction, parts and repair, as well as a step by step rod building manual. The Penn manuals look used, the Rod Building manual looks new.
|
|
|
FLEX COAT ROD BUILDING/WRAPPING KIT--EVERYTHING NEEDED TO BUILD RODS
For sale is a COMPLETE rod building kit with ALL equipment and materials needed to start building rods. I made 5 rods with the unit and am now moving on to my next hobby-reloading. Everything is in either like new condition or unopened. I priced each piece separately and there is over $330 worth of equipment and materials. The rod wrapper and drying motor alone cost $155. I have set a $100 reserve on the auction because even though I want someone to get a good deal-I do not want to give it away. In addition to all the tools and supplies. I am including a rosewood reel seat and nickel silver grip plus a tray to organize all the tools. Included are(see pics) Flex Coat rod wrapping tool-the three pieces on wood in the pic other than the dryer motor-Flex Coat 6 RPM drying motor-also used to apply thread sealer and epoxy-Rosewood grip and reel ... moreseat with nickel silver hardware-for lighter weight fly rods-guessing 2-4 wt-Book-Start To Finish Rod Building" Book-Handcrafting A Graphite Fly Rod" 25 Spools of rod building thread-since used a little-only counted 20 rolls in my estimated value-China marker-white-Stirring sticks-also use for applying trim wrap- Brushes. 3 Tweezers. Razor blade. 2 pr Scissors. 2 Pointed thread movers. Cork and rubber inserts for drying motor-use to hold just a section or two of the rod at a time. 2 Tamiya thin masking tapes-use to hold guides on rod til tied on and also to keep epoxy off of the guides while applying epoxy or thread preservative. Metal and plastic mixing cups. Color preservative and thread sealer. Flex coat rod wrapping finish. Flex Coat epoxy-2 sets. Super glue. Syringes-Tray to organize tools and materials. Note. No hot melt rod tip adhesive or guide adhesive is included. I found the thin masking tape much easier to use. I will also include some links on where to buy rods, materials,etc plus a few links on tying trim wraps. You may need a few toothpics-but figured you would have those- Ship only to the co
|
|
|
ROD BUILDING AND WRAP WOODEN UNIT
Here is a wooden rod building and wrapping unit. This unit is 24 inches long and it expands to 41 1/2 inches long. It is 12 inches tall. All the pieces slide, some of the felt is loose. A little clean up and this is ready to be used and put to work. This comes with a Fenwick Rod builders catalog 1984 and a fiberglass rod making book 1974. Lots of pictures and shows how to do the work. Great item for anyone that works on there own rods. On Mar-14-14 at 09:28:54 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
|
|
|
2 Fishing Rod Building Repair Wrapping Table Clamp Rollers. (B)
Fishing rod wrapping table clamp rollers good for 1 3/4" thick top or less.Thank you.
|
|
|
Do It Yourself Rod Building
Up for bid is this specialty book: Do It Yourself Rod Building” By Bill Stinson. Copyright: 1983, 80 pages. Printed in USA. ISBN# 0-936608-01-3. Cover price: $9.95. Use this book to build these rods: Fly Fishing Rods, Spinning Rods, Casting Rods and Boat Rods for big fish. There is a ding on back cover, lower right corner(see photos) Other than that this book is in very fine to excellent condition. This book packs a lot of information along with helpful photos. TERMS& CONDITIONS: I try to describe items carefully and to the best of my ability. I am not an expert on everything I sell. My knowledge may be limited on some items. Therefore. Your clarification is greatly appreciated. Please keep in mind other than a new item. You are bidding on a vintage and/or used item. Which means it probably does show some degree of weathering and/or the ... moreelements of age and environmental friction and sold“ AS IS” Only bid if you are satisfied with the photo(s) and description. Any questions or additional photos desired please notify me BEFORE BIDDING. I will do my best to accommodate. Payment appreciated within 2 days of auction close. Otherwise. I reserve the right to re-list item. I only accept Pay-Pal as payment. Buyer pays shipping& handling cost. I primarily use USPS. Any other shipping preferences please notify me BEFORE PAYMENT is made for possible invoice revision. International buyers. Please contact me with any questions concerning shipping cost and/or method. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1454e3bd114-0x113-
|
|
|
Vintage Rod Building Tips stainless (tags calstar seeker blank blanks truline ne
There is about 50 rod tips in this package. They look vintage and they have been around for awhile. So I marked them used but they are unused rod tips. They don't stick to a magnet so I'm assuming they are stainless steel. They look sturdy so if you can use them. Here's your chance to get them for a starting price of.10 ea.
|
|
|
3 Cut Off BASS PRO SHOP Cork Spinning Rod Handles for Parts/Building
3 Bass Pro Shop Cut off Spinning Rod Handles for Rod build or repair. Two Wally Marshall's and one Unknown. Being sold AS-IS. These handles are in great shape. I took the plastic wrapping off 2 of them when I received them, but decided that I didn't need them after all. Adult Owned- From a Smoke Free and Pet Free Home Thanks for looking Shipping Information: Shipping to lower 48 states only. Most shipments are sent out within 1-2 business days after payment is confirmed or cleared. All packages are shipped UPS or USPS. Transit time is dependent on the carrier service and cannot be guaranteed. Please make sure the“shipped to” address you enter during checkout is correct. Not responsible for typos or undeliverable addresses. Due to eBay seller protection policy we cannot change the shipping address once payment is made. Payment Information: ... morePaypal payments ONLY please. Payment with eCheck via Paypal will not be shipped until the check is clear. This process normally takes less than 5 days. Payment must be received within 7 days of sale to avoid an Unpaid Dispute Strike. I will leave positive feedback after you’ve paid.
|
|
|
fin-nor tycoon roller guide set vintage rare rod building trolling rod
Rollers show some signs of corrosion but are still very useable. Posted with
|
|
|
LOT of 5 Rod Crafters RodCrafters Journal Rod Building Fishing Magazines 1984
As shown. Hope they find a fan!
|
|
|
How to Wrap a Rod w/ Gudebrod Step by Step Custom Fishing Rod Building Book 1975
No marks. Tears or folds on the pages
|
|
|
FISHING ROD BUILDING Supplies, Huge lot
FISHING ROD BUILDING SUPPLIES Huge lot of different items here From a fishermans estate This item came from a michigan estate PLEASE READ ALL SALES TERMS BELOW THANKYOU FOR YOUR BID See My Other"GREAT" Auctions SHIPPING& PAYMENT High bidder prepays U.S. shipping& handling cost International rates vary and will be e-mailed to you when country is Known International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility and are collected by the buyers country Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior ... moreSo please do not ask me too Payments We Accept: FEEDBACK AND EBAY STAR SYSTEM Please communicate concerns before you leave feedback.I am always very willing to solve any problems you may have as long as it is possible. Shipping cost seems to be a problem with some bidders. Though you need to understand, I keep cost as low as is possible and that shipping is not free for me, so I have to charge you to ship the item. Because of the way eBay's feed-back page is designed. Many buyers are not aware that anything less than a 5-star DSR rating on a transaction lowers a seller's visibility on eBay and increases their eBay fees. Even though the feedback page clearly states that a"4" is for good service, it IS NOT GOOD for hard-working sellers! Sellers must maintain a 4.8 DSR in every category. So if you give someone less than a 4, then you gave them a failing grade,and it increases our selling fees ATTENTION: If you are bidding on more than one of my auctions. Please do not make payment until I send you a final invoice with combined shipping and final price. Do Not Pay for each auction separately, or paypal will charge me.30 cents for each payment you make + the ad
|
|
|
Rare Lew's Fugi Speed Fit Spinning Or Casting Handle Brush Rod Building
Rare lews fugi speed fit handle for casting or spinning rod. Tough to find this model, has light sun bleach. Great condition to fish with. Add $6 USA ship, international add $12
|
|
|
NOS Lot OF 5 Fuji Rubber Grip Rod Handles Rod Building/Repair
Hello I am new to eBay but not new to antiques and collectibles. I have been dealing with antiques and collectibles for nearly 30 yrs. I will be listing a multitude of different items. I have been doing estate liquidation for years and am now merging the internet into by estate sales. Most all the items will be fresh from estates so these will be items that have not been in circulation for many years. I will combine shipping on multiple item purchases upon request. I don't give options on items only facts so please look at the photo's as I consider them my description any damage to items will be listed in the condition field. I will be happy to answer any questions you may have about any of my items. Thank you for your time and considerations. Best Regards. Dan.
|
|
|
Large lot of St.Croix rod parts.Ice fishing or rod building
Up for bids is a lot of 23 St.Croix rod tips with lengths from 37 inches to 54 inches long.These can be used for rod building or the making of ice fishing rods.Or any other use you might have for them.The rod tips are all very sensitive as they are a high graphite content. There are Avid,Premier, Triumph,Mojo as well as other series.They have all been broken in some way or another.There is a lot of guides that are still very useful for repairing other rods.Shipping price to the lower 48 states only.
|
|
|
The New Advanced Custom Rod Building book*hardcover*Dale Clemens*1987
This listing is for: The New Advanced Custom Rod Building book Dale Clemens*1987*hardcover*348 pages"methods for building every kind of rod-from ultralight to surf and offshore trolling. This book is in fair condition. It has wear.Discoloration, and tears on dustjacket. Pages are in good condition. Smoke free and pet free home Buyer to pay Media Mail shipping 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-148bfc63599-0x10a-
|
|
|
HC DJ CUSTOM FISHING ROD BUILDING BOOK DALE P CLEMENS 1987 348 pages
HC DJ 348 pages with many photos and illustrations. Everything covered in custom rod building for all kinds of fishing.
|
|
|
FishiNg Rod Building Dryer Motor 120V 60Hz 3W, Excellent Working Condition
Here is a great little tool for getting that smooth clean coat of epoxy on your Rod Building project. A KA16-2 rod building finishing motor with 120V 60Hz 3W. Works great. Thanks for looking.
|
|
|
LOT OF ST. CROIX MOJO BASS RODS-FISHING RODS - ROD BUILDING
IF YOU WERE TO PURCHASE THESE NEW MSRP $400 Up for bid is a lot of St Croix Mojo Bass Spinning/Casting rods for parts or repair. These are warranty returned rods and the label was removed at the factory. Therefore, there is no warranty on these items. Check the pictures for rod specifics. These are great to use for parts. Each rod contains highly crafted guides. Blanks, and reel seats by St Croix. Features: Premium-quality SC II graphite. Super premium.100% linear S-glass on Mojo Bass Glass models. Technique-specificbass series designed and built for superior performance. Kigan Master Hand3D guides featuring slim. Strong aluminum-oxide rings with black frames. Fuji® ECS reelseat/black hood on casting models. Fuji® DPS reelseat/black hoods on spinning models. Split-grip/premium-grade cork handle. Two coats of FlexCoat slow-cure finish. ... moreMOJO BASS SPINNING RODS: MSRP FOR THESE RODS NEW? ITEMS COME FROM A SMOKE FREE& PET FREE HOME. ALL ITEMS ARE DESCRIBED TO THE BEST OF MY KNOWLEDGE. PLEASE SEE PICTURES FOR DETAILS. SHIPPING ITEMS SHIP WITHIN 3 BUSINESS DAYS. BUSINESS DAYSARE MONDAY-FRIDAY. PLEASE NOTE THAT ADDITIONAL SHIPPING CHARGES MAY APPLYFOR RESIDENTS OF CA. TX, CO, WA. THESE FEES ARE PAID BY THE BUYER. BUYERSFROM THESE STATES PLEASE CONTACT US FOR ACTUAL SHIPPING CHARGES BEFORE PURCHASE. QUESTIONS PLEASE CLARIFY ANY QUESTIONS BEFORE PURCHASE. THANKS FOR YOUR BUSINESS. FEEDBACK FEEDBACK IS VERY IMPORTANT TO US AND WE STRIVE FOR 100%SATISFACTION. IF A PROBLEM OCCURS PLEASE CONTACT US BEFORE LEAVING NEGATIVE FEEDBACK. WE WANT EVERY BUYER TO BE PLEASED WITH THEIR PURCHASE AND THE OVERALL TRANSACTION. Lot 18
|
|
|
Rod Building Rack, holder, wrapper adjustable
Adjustable Rod wrapper only used a few times for repairs. It has multiple slots for rod pieces and holds 2 spools of thread. I'm moving and can't take it to new place. We pack well. Ship fast and have 100% positive feedback.
|
|
|
Collection of Rodcrafters Journal 1983-1991 for Fishing Rod Building and Repair
51 issues of Rodcrafters Journal dated from Jan 1983 to Oct 1991. The only issues missing from this sequence are Jul-Aug 1985 and Sep-Oct 1990. They are all in good condition and full of tips and techniques for building and repairing all types of fishing rods. Shipped in a Medium Flat Rate box or by Media Mail- your choice.
|
|
|
5 RodMaker custom rod building magazine
Custom Rod building magazine.
|
|
|
5 Rodmakercustom Rod Building Magazine
Custom rod building magazines. This is for the 5 shown
|
|
|
6 Rodmaker Custom Fishing Rod Building Magazine
This is for the 6 magazine shown.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14a3fda05b2-0x104-
|
|
|
Large Lot of Assorted Fishing Rod Building Supplies R418
Large Lot of Assorted Fishing Rod Building Supplies This is from an estate that included a fishing shop that closed sometime in the 70's. This lot includes mostly new pieces. Ferrules, rod splints( and other items shown. Please see pictures for items included. Please see the pictures as they are included in the description showing condition and details. We Accept PayPal- This Package Will Be Shipped Upon Payment. And Yes. We Do Combine Shipping On Combined And Multiple Purchases. Please Let Us Know If You Are Bidding On Any Of Our Other Items And Need Us To Wait To Send You A Final Invoice. Communication Is KEY! Check out many other Great items available in our Auction's& Buy It Now's in our store. We Offer A 100% Satisfaction Guarantee With Every Item We Sell! Don't Forget To Add Us To Your Favorite's List! If You ... moreHave Any Questions Feel Free To Ask! Thank You for Looking. From TRADER MAGEE'S! Attention Buyers- In An Effort To Keep Your Items Safe. Secure and Arrive In A Timely Manner. The Cost Of Shipping Is Provided To You To Help You Make A Well Informed Decision To Base Your Bidding On. Our Auction Items Are Always Started At A Very Low Starting Bid To Give You The Best Deals. International Buyers– Please Note: We use eBay's Global Shipping Program Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Know That There Is A Restocking Fee Of 20% For Any Cancellation or Returns*Please visit our other ebay store goldnsilverforyou Thank You for Your Business
|
|
|
Lot of Various St. Croix Fishing Rods-ocean/surf Rod Building Repair
Low starting bid of 99.99 Lot of mixed St. Croix Surf/Ocean Rods.These are for parts or repair. The factory label has been altered to void warranty. These are warranty returned rods and the label was removed at the factory. Therefore, there is no warranty on these items. Check the pictures for rod specifics. This is for parts or repair. The rod contains highlycrafted guides. Blank, and reel seat by St Croix. ITEMS COME FROM A SMOKE FREE& PET FREE HOME. ALL ITEMS ARE DESCRIBED TO THE BEST OF MY KNOWLEDGE. PLEASE SEE PICTURES FOR DETAILS. SHIPPING ITEMS SHIP WITHIN 3 BUSINESS DAYS. BUSINESS DAYSARE MONDAY-FRIDAY. PLEASE NOTE THAT ADDITIONAL SHIPPING CHARGES MAY APPLYFOR RESIDENTS OF CA. TX, CO, WA. THESE FEES ARE PAID BY THE BUYER. BUYERSFROM THESE STATES PLEASE CONTACT US FOR ACTUAL SHIPPING CHARGES BEFORE PURCHASE. QUESTIONS PLEASE CLARIFY ... moreANY QUESTIONS BEFORE PURCHASE. THANKS FOR YOUR BUSINESS. FEEDBACK FEEDBACK IS VERY IMPORTANT TO US AND WE STRIVE FOR 100%SATISFACTION. IF A PROBLEM OCCURS PLEASE CONTACT US BEFORE LEAVING NEGATIVE FEEDBACK. WE WANT EVERY BUYER TO BE PLEASED WITH THEIR PURCHASE AND THE OVERALL TRANSACTION. Lot 27.
|
|
|
Lot of St. Croix Fishing MOJO Rods-ocean/surf Rod Building Repair
Low starting bid of 149.99 Lot of mixed St. Croix Surf/Ocean Rods. mainly Mojo Series Ocean/Surf rods. These are for parts or repair. The factory label has been altered to void warranty. These are warranty returned rods and the label was removed at the factory. Therefore, there is no warranty on these items. Check the pictures for rod specifics. This is for parts or repair. The rod contains highlycrafted guides. Blank, and reel seat by St Croix. ITEMS COME FROM A SMOKE FREE& PET FREE HOME. ALL ITEMS ARE DESCRIBED TO THE BEST OF MY KNOWLEDGE. PLEASE SEE PICTURES FOR DETAILS. SHIPPING ITEMS SHIP WITHIN 3 BUSINESS DAYS. BUSINESS DAYSARE MONDAY-FRIDAY. PLEASE NOTE THAT ADDITIONAL SHIPPING CHARGES MAY APPLYFOR RESIDENTS OF CA. TX, CO, WA. THESE FEES ARE PAID BY THE BUYER. BUYERSFROM THESE STATES PLEASE CONTACT US FOR ACTUAL SHIPPING CHARGES ... moreBEFORE PURCHASE. QUESTIONS PLEASE CLARIFY ANY QUESTIONS BEFORE PURCHASE. THANKS FOR YOUR BUSINESS. FEEDBACK FEEDBACK IS VERY IMPORTANT TO US AND WE STRIVE FOR 100%SATISFACTION. IF A PROBLEM OCCURS PLEASE CONTACT US BEFORE LEAVING NEGATIVE FEEDBACK. WE WANT EVERY BUYER TO BE PLEASED WITH THEIR PURCHASE AND THE OVERALL TRANSACTION. Lot 26.
|
|
|
Pool Cue Fishing Rod Wrapping Dryer Repair, Building - Roller Stand Rest (2)
This auction is for two(2) roller stands. Fully adjustable for elevation. Custom handcrafted from aluminum with steel posts and ball bearing rollers. The single roller can be turned backwards if desired. The paired rollers are staggered but on the same x plane. Rollers are a shade over 1 1/4" in diameter. The shorter post is 8.5" high. Posts screw into base. Seller reserves the right to disassemble for shipping. These are seller fabricated. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b716e55d6-0x109-
|
|
|
Lot of Various St. Croix Fishing Rods-ocean/surf Rod Building Repair MOJO
Low starting bid of 189.99 Lot of mixed St. Croix Surf/Ocean Rods. MOJO, etc.This lot could possjble make 5 complete rods after repairs. Some need ferrule and/or tip. Well over $1000 worth of rods. See puctures for details. These are for parts or repair. The factory label has been altered to void warranty. These are warranty returned rods and the label was removed at the factory. Therefore, there is no warranty on these items. Check the pictures for rod specifics. This is for parts or repair. The rod contains highlycrafted guides. Blank, and reel seat by St Croix. ITEMS COME FROM A SMOKE FREE& PET FREE HOME. ALL ITEMS ARE DESCRIBED TO THE BEST OF MY KNOWLEDGE. PLEASE SEE PICTURES FOR DETAILS. SHIPPING ITEMS SHIP WITHIN 3 BUSINESS DAYS. BUSINESS DAYSARE MONDAY-FRIDAY. PLEASE NOTE THAT ADDITIONAL SHIPPING CHARGES MAY APPLYFOR RESIDENTS ... moreOF CA. TX, CO, WA. THESE FEES ARE PAID BY THE BUYER. BUYERSFROM THESE STATES PLEASE CONTACT US FOR ACTUAL SHIPPING CHARGES BEFORE PURCHASE. QUESTIONS PLEASE CLARIFY ANY QUESTIONS BEFORE PURCHASE. THANKS FOR YOUR BUSINESS. FEEDBACK FEEDBACK IS VERY IMPORTANT TO US AND WE STRIVE FOR 100%SATISFACTION. IF A PROBLEM OCCURS PLEASE CONTACT US BEFORE LEAVING NEGATIVE FEEDBACK. WE WANT EVERY BUYER TO BE PLEASED WITH THEIR PURCHASE AND THE OVERALL TRANSACTION. Lot 30.
|
|
|
REFERENCE THE COMPLETE BOOK ROD BUILDING & TACKLE MAKING FISHING RODS
On auction: A really nice and super clean book. The Complete Book of Rod Building& Tackle Making. See Amazon Books for particulars. Thinning out the Herd. We gladly combine shipping costs. Refunds are issued if shipping costs are much less than charged. Hey There. if shipping to your doorstep costs more than charged. I'll eat it! NO International customers. CONUS bidders only! All items sold as is. No warrenty expressed or implied. Buyer assumes all responsibility for proper use of this item. No returns unless authorized. Delivery Confirmati0n is included in the shipping cost as a service of The Snoo Shoppe when mailed through USPS. Insurance is FREE for items that sell for OVER $50, otherwise the buyer will have to ask for insurance at their additional cost. The Snoo Shoppe will not be held accountable for items lost or damaged during ... moreshipping. Feedback will be given after feedback is received. If there is ANY problem with this item. The shipping of this item, or the conditions of the sale of this item, it will be the responsibility of the buyer to contact The Snoo Shoppe for resolution, or explanation, of any questions you may have before bidding on this item. We are persons like you. not a business. therefore, it is our desire that you are satisfied with your purchase. Bids will be tendered in acceptance of these terms; no exceptions without consent of the Snoo Shoppe. I will see to it that your item will be well packed so there will be no loose or damaged parts. We accept Pay-Pal. We will securely package your purchase to ensure that it arrives with SNOO! Thanx for stopping by THE SNOO SHOPPE! Posted with the
|
|
|
Rod Building - Rod Crafters Journal - (17 issues)
Rod Crafters Journals Issues Included: Volume 32. Number 2- April-June 2006 Volume 32. Number 3- Fall 2006 Volume 32. Number 4- Winter 2006 Volume 33. Number 1- Spring 2007 Volume 33. Number 2- Summer 2007 Volume 33. Number 3- Fall 2007 Volume 33. Number 4- Winter 2007 Volume 34. Number 1- Spring 2008 Volume 34. Number 2- Summer 2008 Volume 34. Number 3- Fall 2008 Volume 34. Number 4- Winter 2008 Volume 35. Number 1- Spring 2009 Volume 38. Number 4 Volume 39. Number 1 Volume 39. Number 2 Volume 39. Number 3 Volume 39. Number 4
|
|
|
LOT 1 Rod Maker Magazines #6 Rod Building Fishing TIPS
This exceptional magazine is from VOLUME 3. It is# 6. THE MAGAZINE IS CLEAN. BRIGHT, WITHOUT NAMES OR MARKINGS, AND WITHOUT CREASES OR TEARS. Cover are very good. Please ask any questions before bidding. Thanks for looking! Thanks for bidding! Payment is expected within 3 days using PayPal with a confirmed shipping address. I only use shipping addresses that are confirmed in PayPal. All items are shipped using USPS Media Mail. I make every effort to accurately describe and provide pictures of the items that I offer for sale. I strive for a 5-star rating. If you have any problem with this transaction. Please allow me the opportunity to correct it. Thanks.
|
|
|
LOT of 6 Rod Maker Magazines VOLUME 5 #s 1 2 3 4 5 & 6 Rod Building Fishing TIPS
These 6 exceptional magazines are from VOLUME 5. They include ISSUES#1. 2, 3, 4, 5, 6. FIVE of the magazines are VERY GOOD! THOSE MAGAZINES ARE CLEAN, BRIGHT, WITHOUT NAMES OR MARKINGS, AND WITHOUT CREASES OR TEARS. Covers are very good. Check the pictures. ISSUE#2 IS ONLY IN ACCEPTABLE CONDITION. It seems that perhaps a pet might have chewed on it. At first. I wasn't going to include it in the auction, but I couldn't throw it away. And it completes the set. It is still readable. It only has indents in part of it. Check out the last picture. Please ask any questions before bidding. Thanks for looking! Thanks for bidding! Payment is expected within 3 days using PayPal with a confirmed shipping address. I only use shipping addresses that are confirmed in PayPal. All items are shipped using USPS Media Mail. I make every effort to accurately ... moredescribe and provide pictures of the items that I offer for sale. I strive for a 5-star rating. If you have any problem with this transaction. Please allow me the opportunity to correct it. Thanks. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14bed25e744-0x11c-
|
|
|
LOT of 4 Rod Maker Magazines VOLUME 7 #s 2, 3, 4, & 5 Rod Building Fishing TIPS
These 4 exceptional magazines are from VOLUME 7. They include ISSUES#2. 3, 4, 5. THE MAGAZINES ARE CLEAN, BRIGHT, WITHOUT NAMES OR MARKINGS, AND WITHOUT CREASES OR TEARS. Covers are very good. Please ask any questions before bidding. Thanks for looking! Thanks for bidding! Payment is expected within 3 days using PayPal with a confirmed shipping address. I only use shipping addresses that are confirmed in PayPal. All items are shipped using USPS Media Mail. I make every effort to accurately describe and provide pictures of the items that I offer for sale. I strive for a 5-star rating. If you have any problem with this transaction. Please allow me the opportunity to correct it. Thanks.
|
|
 |