2 vintage "STEEL TELESCOPING CASTING RODS" for 1 price, Union Hardware & Bristol
These two old steel casting rods telescope open. The top"BRISTOL" rod opens to approx. 8 feet long and is in very good condition for it's age. The bottom"UNION HARDWARE" rod. With agate line guides, opens to approx. 8 1/2 feet long and is in fair condition, with some oxidation and paint loss(see pictures) US bidders only please.
|
|
Vintage Union Hardware Steel Telescoping Fishing Rod 8 1/2' Torrington, Conn.
Item: vintage steel telescoping fishing rod made by'Union Hardware Company' Torrington, Conn. made in Torrington. Conn. materials- plated brass reel seat& handle butt cap. Steel rod sections. Markings: Mfd. by Union Hardware Company. Torrington, Conn. on the reel seat area.photo) Weight- 8 oz. Dimensions- 8 1/2' length.42 3/4" when taken down. Condition: used. very clean rod. telescoping sections slide in/out. some paint loss. some cork loss. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
VINTAGE SUNNYBROOK STEEL ROD 4'6",UNION HARDWARE,LOOKS TO BE A OLE CASTING ROD
VINTAGE SUNNYBROOK STEEL ROD 4'6"UNION HARDWARE,LOOKS TO BE A OLE CASTING ROD, OUT OF MY COLLECTION OF OLE STEEL RODS, SHIPPING WILL BE IN POSTAL TUBE(large flat rated price)
|
|
Vintage Fly Rod UNION HARDWARE CO. all steel rod
Very nice rod. Works very nice glass eyes and made in CT. Union Hardware Co. 8' 6"
|
|
VINTAGE UNION HARDWARE STEEL FLY FISHING ROD 3 PARTS NEED WORK
Union Hardware Company of Torrington. Conn. They sold a lot of rods in the first half of the 1900s. They had several steel rod models in the 1910-1930 time frame. Marked: Union Hardware VIM. extruded steel rod. It is hollow. Extruded as one piece of molten steel and you will notice the taper in the rod as you run your finger along the length.you can feel where it steps down in size as you go toward the tip. The steel fly rods work pretty well. I am not sure if this rod is complete with the 3 pieces. The cover is very worn out ALL SALES ARE FINAL- SORRY NO RETURNS
|
|
Vintage Cast Fishing Steel Rods Lot Union Hardware Premax Bristol
Nice lot of Steel rods. Seem to be in used but good condition. Add these to your collection.
|
|
Vintage Union Hardware Sampson Steel Fishing Rod
Early 4 piece Sampson steel fishing rod. 5 foot length. Marked Union Hardware Torrington Conn. Cork handle and ruby glass eye. A nice addition to anyones collection.
|
|
Vintage - Union Hardware Steel Telescopic Rod 8'-6"
This rod is un-cleaned and unrestored. The sections telescope with effort. There are no bend or kinks in the rod. The first section had 80% of its original black paint. And the end section has, I would guess none, and is cloaked in a nice rust red dusty pantina. The middle section is somewhere in between. The cork handle is in good physical condition, not crumbly or loose. The middle eyes are tight and straight, and the end rod tip had a slight bend to one side. The ring to keep the reel on is split, and I don't know if it was constructed this way, or damaged. The rod collaped is 43" overall. I did some quick research. And it dated this rod from 1910 to the 1930's with me leaning towards the later. I believe this would make a great restoration project for the angler into vintage equipment. I am not a fly-fisherman but have acquired ... morea bunch of rods and reels at local auctions. I'll start the bids off low. And let the ebay community set the values. Please feel free to ask questions and I will answer every one, as best I can. It would be great to see this 80 to 100 year old stick kill a few more fish.
|
|
Antique Union Hardware 2 Piece Steel Bait Caster Rod 1900-1930 9 Feet
Antique 2 piece steel bait caster from 1900-1930 by Union Hardware. Excellent example of 9 foot rod with red agate guides. Brass guide thimble needs polishing. If you win multiple auctions add $1 to each additional item won for shipping cost. CHECK OUT MY OTHER AUCTIONS! Payment with PAYPAL ONLY must be made within 5 days from end of auction. If payment is later than 5 days. I reserve the right to re-list the item. PLEASE INCLUDE YOUR STREET ADDRESS as well as any P.O.Boxes because we ship both USPS and UPS. We will ship out your item same day(if mail can still be collected in our area usually before 4p.m. or next day after we collect your payment. Thank you! International Buyers Please Note The Following Information: International buyers(including Canada) please contact me before bidding so we agree on shipping fees. These vary due to weight ... moreof item and location. International buyers pay with PAYPAL ONLY. eBay may remove negative or neutral Feedback due to customs delays or customs fees. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Return Policy: You may return any item within 14 days of purchase. If the problems ours(the seller's) fault we pay for shipping both ways. If you simply do not like the product then you(the buyer) pay shipping both ways.
|
|
Vintage Union Hardware Steel Telescoping Fly Fishing Rod 102" Torrington Conn
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Up for bids is this vintage steel telescoping fly fishing rod made by Union Hardware Company. Torrington, Conn. The materials in this rod are plated brass reel seat& handle butt cap. With flexible steel rod sections. The ruby-colored eyelets may be Bakelite, but I’m not sure. Dimensions– 102” length when extended. And 42-1/2" when telescoped. This rod is as I found it. It needs cleaning. Oiling. It has all the signs that it is quite old and had a lot of use. At least two of the three ruby eyelets have split. The cork is intact, but fragile. The rod is straight, and telescopes, but could do with cleaning. There is paint loss, of course. The plating on the handle and butt cap is worn through in spots. When extended. It has surprisingly responsive action, considering ... moreit is a steel rod. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-140b7cfee25-0xf5-
|
|
VINTAGE STEEL FLY FISHING ROD POLE 9' BY UNION HARDWARE TELESCOPING COLLECTIBLE
THIS AUCTION IS FOR A VINTAGE 1 PIECE STEEL FLY FISHING ROD. ROD MEASURES 9' IN LENGTH- FOLDING TO 38 3/4" HANDLE/ REEL SEAT MADE OF CORK AND BRASS. MADE BY UNION HARDWARE TORRINGTON. CONN. TELESCOPING ROD- SLIDES TOGETHER SMOOTHLY. ROD IS IN GOOD CONDITION. ALL PARTS COULD USE A CLEANING. REFER TO PICTURES FOR MORE DETAILS. PLEASE ASK ANY QUESTIONS YOU MAY HAVE. DON'T FORGET TO CHECK OUT OUR OTHER AUCTIONS. COMBINED SHIPPING IS AVAILABLE.
|
|
Vintage Union Hardware Fly Fishing Rod w Sock - Steel - Gold Finish - Nice!
Vintage Union Hardware Fly Fishing Rod w Sock- Steel- Gold Finish- Nice! Up for bids is a Union Hardware Co. metal(steel) fly fishing rod. The rod measures 95 inches long(7 feet 11 inches) when assembled. The line guides all appear to be present and are in very good condition. The cork on the handle looks good. Included is a cloth(unmarked) rod sleeve but the handle section does stick out about 2 inches beyond the sleeve end. Note that the handle section is longer than the tip. The rod has a gold finish and is marked in raised lettering with the company name on the reel attachment area of the handle. The ferrule works well with a pop when the rod is disassembled. I will offer this rod to foreign bidders however please note that due to the length of the rod it could be fairly expensive to ship to some countries outside the United States. If ... moreyou are living in a country outside the United States or Canada please feel free to contact me for a shipping quote if you have a serious interest in purchasing the rod. Note that I am listing another fly fishing rod tonight(one by Union Hardware and another by Montague) Please see my seller's list if interested. I do accept PayPal and you may also pick up your item in person if desired. Payment is very much appreciated within 5 days of winning this item. I always try to ship within 1 business day of receiving your payment and often ship on the same day the payment is received if possible. I also will combine on shipping whenever possible. Should you win more then one item I will send you a combined shipping invoice shortly after the auctions have concluded.usually within one hour. INTERNATIONAL CUSTOMERS: I do recommend using USPS Priority Mail International for international shipping since tracking and some insurance is provided when Priority Mail International is selected. If USPS First Class Mail International is selected for shipping there is no tracking or insurance provided. I try my very best to describe items accurately. However should I miss something of im
|
|
Two Vintage Union Hardware Steel Casting Rods Both with Red Agate Eyes
UP FOR BIDS IN THIS AUCTION ARE TWO VINTAGE UNION HARDWARE STEEL RODS. BOTH HAVE RED AGATE EYES. A 4-1/2' SUNNYBROOK AND A 5-1/2' SAMSON. I STARTED SELLING MY COLLECTION LAST WINTER AND QUIT TO FISH IN THE SUMMER. I WILL BE FINISHING UP THIS WINTER. I WILL COMBINE SHIPPING WITH ANYTHING IN MY STORE AND IF THERE ARE ANY QUESTIONS PLEASE ASK.
|
|
VINTAGE STEEL FISHING ROD CORK GRIP UNION HARDWARE CO CONN BAKELITE END
5 FOOT STEEL FISHING ROD UNION HARDWARE CO. TORRINGTON CONN. HAS ORIGINAL EYELET'S SEE PICTURES AND CORK HANDLE WITH BAKELITE END,EYELETS TIGHT BUT SOME WINDING LOOSE, CORK HANDLE HAS COUPLE CHIP'S OUT OF IT. NEAT OLD STEEL ROD.
|
|
Vintage Samson 7'5" Steel Fishing Rod 3/1 Plus Detachable Handle Union Hardware
This is a classic steel rod from the Union Hardware Company of Torrington. Conn. U.S.A. The handle has a forward mount reel seat, useful for trolling or casting, possible to use as a fly rod. It appears that the butt section is 3" short and has been repaired, otherwise in very good condition. There is an agate stripper guide and an agate tip-top. This comes in its original bag. The label is washed out, unreadable.
|
|
10 VINTAGE ANTIQUE STEEL FISHING RODS CASTING POLE Heddon, Union Hardware, True
HI YOU ARE BIDDING ON 10 STEEL FISHING RODS. AS YOU CAN SEE THERE ARE SOME TRUE TEMPER ACTION ROD SPEED LOCK. HORROCKS IBBOTSON, RICHARDSON, SPORT KING AND OTHER MISC. MAKERS. 5 OF THESE POLES HAVE RED AGATE EYE GUIDES. THESE WOULD BE GREAT TO CLEAN UP AND USE OR DECORATE A ROOM OR LODGE WITH. WHAT YOU SEEE IS WHAT YOU GET. I AM SELLING ITEM AS IS BUT YOU WILL NOT BE DISAPPOINTED. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143953ee6b6-0x106-
|
|
Vintage Samson Steel Fly Fishing Rod Union Hardware Co. Torrington , Conn
As Shown has some rust. But all the eyes and everything seems to be complete. the carrying case is somewhat tattered. Happy Bidding!
|
|
Vintage Union Hardware Company Steel Pack Rod w/case - Bait Spin Fly Casting
Vintage Union Hardware Company Steel Pack Rod w/case. The center section is broke near its bottom(section is complete disattached and cracked) The case shows some wear as does the cork handle. Please see photos for further details.
|
|
Vintage Sunnybrook Steel Fishing Rod & Bag Union Hardware Company Torrington, CT
Marked on handle Sunnybrook Steel Rod Union Hdwe. Co. Torrington, Conn. Made of steel, about 3' long assembled. The one section is missing the tip.
|
|
Vintage fly fishing rod and reel/ Samson steel rod/ union hardware /early 1900's
You are bidding on a vintage early 1900's union hardware Samson steel fly fishing rod. It is in good condition for its age and you can fish with it. The reel works but it does not click anymore. It extends out over 7 foot measured from the front of the handle. The loops on each section are made of brass. The rod is surprisingly light with great action. The cork handle is in good condition with little wear.There is two small red paint spots on the first section of the rod which can be removed. Good luck
|
|
Vintage Samson Steel 4Pc. Steel Fly Rod made for Union Hardware Torrington Conn
I Ship in US Only. This is a Vintage Samson Steel 4Pc. Steel Fly Rod made for Union Hardware Co. Torrington Conn. The Rod is Tight and Straight. The Cork on Handle is Poor(LOOK AT PHOTO" Buyer to add $8.00 for Priority Shipping.
|
|
Vintage Samson Steel Fly Fishing Rod Union Hardware Co.& SUNNT BROOK ROD REEL
THANK YOU FOR LOOKING AT OUR ITEMS PLEASE KEEP AN EYE ON US WE TRY TO BRING GREAT ITEMS TO EBAY WE SHIP VERY FAST OUR GOAL IS TO PLEASE ALL OUR CUSTOMERS I F YOU HAVE ANY QUESTION PLEASE CONTACT US WE COMBINE SHIPMENTS WE HAVE TWO ANTIQUE STEEL RODS AND REEL 1ST IS A 9 FOOT STEEL FLY ROD SAMSON STEEL ROD HARDWARE CO. TORRINGTON CONN USA NICE VINTAGE STEEL ROD NEXT IS A 5 FOOT 2 PIECE 6 FOOT ROD AND REEL ROD IS MARKED SUNNY BROOK STEEL ROD UNION HARDWARE COMES WITH A VINTAGE REEL MARKED MADE IN THE USA GOOD WORKING CONDITION THESE ARE PART OF AN ESTATE It is my goal to be one of the best sellers on eBay and to earn all fives on the seller ratings from you. If there is a problem or anything preventing you from leaving me the best possible rating please let me know and allow me to correct the problem for you. A person should be judged not by ... morethere mistakes but by their willingness to rectify their mistake. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14493ab7e16-0x103-
|
|
Two Vintage Union Hardware Co. Samson Steel Fishing Rods, 5'3" & 6"2", 1 Handle
This is a two rod travel pack. Sharing a single handle. Made by Union Hardware of Torringtom, Connecticut. The handle section has a forward mounted reel seat, not reversible. The reel seat has a trigger style sliding locking ring. The longer rod has three equal sections plus the detachable handle, measuring 6'2" It has an agate stripper guide, an agate tip-top and two two-ring guides, one damaged. The shorter rod has three sections plus the detachable handle measuring 5'3" It has three two ring guides and a three ring tip-top Other than the damaged guide it is in very good condition. A nice vintage item for a fishing collection. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-144b1eeeb10-0xfd-
|
|
Vintage Sunybrook Steel Fly Fishing Rod Union Hardware Co. Torrington , Conn
THIS AUCTION IS FOR A VINTAGE SUNNYBROOK STEEL FLY ROD MADE BY UNION HARDWARE. IT IS IN GOOD CONDITION SOME PAINT LOSS WITH SOME LIGHT SURFACE RUST AS SEEN IN PICS. ALL EYES LOOK TO BE IN GOOD SHAPE. IT MEASURES ABOUT 5 FEET. I ALSO HAVE THE REEL LISTED IN OTHER AUCTION. ANY QUESTIONS PLEASE ASK. THANKS FOR LOOKING AND GOOD LUCK!
|
|
ANTIQUE SAMSON 4-PIECE STEEL ROD WITH CASE. RED AGATE EYELETS UNION HARDWARE CO.
For your consideration I am listing an old antique"SAMSON" 4-piece steel fishing rod with the original case. The rod has four of the old antique red agate eyelets. On the handle it says: SAMSON UNION HARDWARE CO. TORRINGTON. CONN. USA. The rod has it's original finish. 14 day return policy. Buyer has to cover the cost to send it back. Full refund provided item is in same condition it was in when I shipped it out. EBAY PREFERS THAT PAYMENT BE MADE THROUGH PAY PAL. WILL SHIP WORLD WIDE I COMBINE SHIPPING WHENEVER POSSIBLE. Thank you for looking at my auctions.
|
|
One Antique Union Hardware Steel Casting Rod and One Fiberglass Casting Rod
Two antique casting rods. One rod is marked Union Hardware. The other is not marked. The Union is a 5ft, cork handle and is made of steel. The other rod is a 6ft fiberglass casting rod. All guides and wraps are intact but they are very old with some rust on the guides. Two nice collectable rods. Please check all photos. Please don't bid unless you intend to pay.
|
|
Vintage Union Hardware Steel Rod &Vintage South Bend 300 Antibacklash Reel
Up for auction is a casting rod and reel combo. The rod is marked Union Hardware. The Union rod is a 5ft. Cork handle and is made of steel. The reel is a vintage South Bend No. 300 model E anti backlash reel. The reel works fine. No problem with worm gear. Please check all photos. Please don't bid unless you intend to pay.
|
|
VINTAGE NOS UNION HARDWARE 2 PIECE STEEL FLY ROD-NO. A4065-3-8 1/2' LONG
VINTAGE NOS UNION HARDWARE 2 PIECE STEEL FLY ROD-NO. A4065-3-8 1/2' LONG. Please ask this seller with any questions. Buyer pays shipping.
|
|
Union Hardware Collapsible Fly Fishing Rod Metal Steel Pole Telescopic Antique
Extends to 100" long
|
|
Antique "Samson Steel Rod" Telescopic 10ft Fishing Rod, Union Hardware Co, USA
This is an uncommon example of an early 20th century steel telescopic fishing rod from the Union Hardware Company. Torrington, Conn. USA. It is marked as the"Samson Steel Rod" and it does have a great feel to it, it is surprisingly light and flexible. It extends telescopically from a minimum length of 40 inches to a maximum of 10 feet. The cork handle is a little worn as shown but is intact and the rod is fully functional, although it looks as though there should have been a cap on the handle end. Due to the length of the rod it will have to be posted as a parcel rather than a"small package" so the postal rate will differ from country to country. But to give you an idea, the cost of the Globalvalue Parcelforce service to the USA will be £31 total. The delivery cost to UK addresses is quoted and we ask any other international ... morebidders to request a quotation for P&P costs to their country before bidding please. Payment All payments must be in UK Pounds and international or non-UK buyers can only pay by Paypal UK buyers only can pay by Paypal or cash on collection. Personal cheques and Postal Orders are also accepted, but may delay postage while cleared. Packing and Postage Your items will be very carefully packed and sent by the most economical. Safe and insured option depending on the anticipated sales value, size and weight- if the actual postage cost is less than we expected we will refund any excess payment after posting. If you would prefer an enhanced postal service from the one we have selected please ask us for a quotation for the extra cost. We need your full address in clear English but if you send the same details in your own language we will also add this to the label. Please note that the UK postal service will not accept a PO Box number address for"Signed For" post. We are happy to ship anywhere in the world so, if the P&P for your country is not listed, please request a quotation before bidding. Import Duty We have not included any charges related to the impo
|
|
Samson Steel Union Hardware Co. Casting Fly Fishing Rod With Carry Bag Vintage
YOU ARE BIDDING ON A VINTAGE FISHING ROD& REEL. HAS NORMAL WEAR DUE TO AGE& STORAGE. MEASURES AROUND 58" LONG ITEM CONDIITON: IN GOOD SHAPE ROD IS ALL METAL BAG IS ROUGH. All items I Sell are offered“ AS IS. I The Seller make no warranty. Guaranty or representation of any kind. Please read all descriptions. Examine all photos, and make sure the item is right for you before bidding. This Is Another Great Item That Has Been Found. Selling with No Reserve To Highest Bidder. BE SURE TO CHECK OUT MY OTHER VINTAGE ADS.BOOKS,BOOKLETS,CALANDERS,TRADE CARDS,PHOTO'S; DECORS,RARE PEICES, MANY OTHER VINTAGE ITEM'S. PLEASE FEEL FREE TO MESSAGE ME ON ANY& ALL QUESTIONS YOU MAY HAVE ABOUT THIS ITEM. THANKS& HAPPY BIDDING! I Offer Discount Shipping On Multiple Items Purchased By Same Buyer! Bid With 100% Confidence If For Any ... moreReason You Are Not Happy With The Item You Receive I Will Refund Item Cost& Shipping Paid When Item Is Returned In Original Condition Shipped. NOTE) All Return Shipping Is The Responsibility Of The Buyer.
|
|
Classic Union Hardware 8'6" Steel Telescoping Fly Fishing Or Casting Rod
This vintage rod is in very good condition. The tip section slides a little to easily. Can be tightened with a light crimp at the joint, best left to the new owner. This three section rod can be used as a fly or casting rod, simply by reversing the grip and reel seat. The reel seat has an excellent decal.
|
|
Vintage Samson Steel 3Pc. Steel Fly Rod made for Union Hardware Torrington Conn
Nice vintage steel fishing rod. I assembled it and it seemed to fit together good. No obvious damage. Just good vintage wear and tear as shown in the photos. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1471c16ce74-0x103-
|
|
Samson steel fly rod(4 peice-total)VINTAGE almost pocket size/union hardware co.
Vintage Samson steel fly rod. Union hardware co.Torrington conn. USA. 4 piece rod, fits in tackle box or almost anywhere. All complete/working but has some age. Has G.G.W on handle, once again belonged to grandfathers father(or grandfather) very old. will ship priority w/insurance,Good luck.TOM
|
|
Vintage Steel, Pack, Tacklebox, Fishing Rod, Samson, Union Hardware Co.
Vintage Union Hardware Co. Samson Steel Rod. Small 4 piece fishing rod. Perfect pack or tackle box size. Comes with original sock. Missing a small screw on the butt. Unique old fishing rod will make a great addition to your collection. FREE SHIPPING
|
|
Vintage Gephart Steel Rod & Union Hardware Telescoping Rod Fishing Poles (C)
Vintage Gephart Steel Rod& Union Hardware Telescoping Rod Fishing Poles(C) The rods are in used but good overall condition. The handle on the Gephart is cast aluminum and cork with a steel rod. All of the guides are attached. it measures about 40" long. the Union rod also measures about 40" when collapsed, but extends to nearly 9& 1/2 feet. PLEASE SCROLL DOWN TO LOOK AT THE PICTURES AND SEE THE DETAILS) Please ask questions before bidding. We will combine shipping on multiple auctions. We ship worldwide! 7% Sales Tax charged on Florida orders. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Vintage 3 Piece Samson, Union Hardware Co. Steel Fishing Pole Very Good Shape.
I ONLY SHIP TO THE LOWER 48 STATES PLEASE ASK ANY QUESTION'S BEFORE BIDDING. THANK YOU. THE SAMSON UNION HARDWARE 3-PIECE FISHING POLE IS IN GOOD SHAPE AS SEEN IN PHOTO'S. THE CORK HANDLE LOOKS NEW! DOUBLE EYELETS. SINGLE EYELET ON THE TIP OF THE POLE. NICE FISHING POLE FOR THE COLLECTOR OR TO USE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1479a3429f4-0x111-
|
|
de Vintage Samson 5½' Steel Casting Rod in Original Cloth Case Union Hardware Co
Welcome to Beyond the Basement Offering this vintage Samson 5½' steel casting rod in the original cloth storage case. Union Hardware Co. Torrington Conn. Usa Additional photos below. Great condition. View My Other Items For Sale and combine shipping. All Internet payments to be processed through PayPal. Local Pickups Strictly by Cash Only. International Shipping Note: Small Packet Airmail when offered. Remains an economical method of shipping, but to be used solely at your own risk. There is no tracking or insurance available with this service, and we will not be held responsible for any loss or delays within the postal process. All International packages with a value over $100 must be shipped with tracking. Please wait for a revised invoice as Small Packet will no longer be an option. By placing a bid or committing to a purchase. ... moreYou hereby agree to the terms set out above. All our items are purchased or consigned from local estates. And will be delivered to you in gently used condition unless otherwise stated. We encourage reviewing all the photos provided as they are part of our description. And welcome any questions or concerns you may have. Any import duties and taxes are not included in the sale price. And remain the buyer's responsibility. These additional charges can be determined from your local customs office. When combining multiple purchases. Please wait for a revised invoice, as Ebay checkout is not always correct. In the event that you pay prematurely, we will consider the overpayment a tip, and thank you in advance for this. We do ask that all payments be made with 3 days after your invoice has been sent. Thus avoiding any delays in shipping. Thanx for your interest. All the best. Kari. Add me to your Favorite Sellers for future estate finds.
|
|
Lot 5 Vintage Steel Fishing Rods Telescoping Luckie Bristol Union Hardware
For sale is a lot of 5 vintage steel fishing rods. 4 of them are telescoping and one is not. The one piece solid rod I cannot find a maker on. All of the rods are in poor or fair used condition. The cork on many of them has been chewed up or worn down. Most have some level of rust and can be a little difficult to move. Ends on a few of these are also bent. Well worn, but some could still be used or they would be perfect for rustic decorating! Here are some additional details on each rod: One piece rod I am not sure of maker this one is probably in the best shape too. 5' 4" Luckie rod the end piece does not stay in and will pull all the way out. 8' Union Hardware pistol grip end piece also pulls out on this one. 7' 11" Bristol green handle end bent. After the first piece the eyes don't line up, like the other pieces ... morewere rotated 90 degrees. 9' 4" Other Bristol damaged cork handle. 9' 1" I try to describe my items as accurately as possible and if you have any questions please feel free to ask! Thank you for looking! This item is sold"as is. Michigan residents must pay 6% sales tax. Returns are accepted but must be made within 14 days. Buyer will pay return shipping with Delivery Confirmation and refund will be issued when item has been received by me. Item must be in the condition as photographed in the original listing. Buyer must pay within 4 days of auction end. Paypal is the only accepted payment method. If you pay with Paypal E-Check I will ship once the payment has cleared. I ship next day when possible. International Bidders I will gladly ship internationally but since shipping can be quite expensive. You MUST contact me before the auction ends to get a shipping quote. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
|
|
Vintage Union Hardware-5 1/2 ft. Samson Steel Fishing Rod with original sock !!
Vintage Union Hardware 5 1/2 ft. Samson steel fishing rod; comes with the original sock. It has a cork handle and metal shiny chrome on butt end and reel seat. The metal rod is black. Furrows are brass. The eye guides are glass. It measures 5 1/2 ft. long; I assembled it and fits together good. Everying is intact. Very nice rod.
|
|
VINTAGE UNION HARDWARE FLY FISHING POLE+ HOMCO STEEL POLES HOMCO FOR PARTS ONLY
2 VINTAGE TELESCSCOPIC FISHING POLES THE UNION HARDWARE POLE IS IN WORKING CONDITION THE HOMAC HAS EXSPANDING PROBLEMS AND A MISSING GUIDE THE UNION FLY FISHING POLE EXSPANDS TO 8 FT. IF YOU HAVE ANY QUESTIONS I WILL ANSWER ASAP. THANK YOU FOR LQQKING.
|
|
Vintage Union Hardware Co Steel Telescopic Fishing Rod w/ an Executive attached
Very good shape. Cork is chewed a little and the finish has come off the rod quite a bit. But everything is in working order. The full length is 106 3/4" The Executive by Shakespeare is a Free Spool No. 1992 I bought it in an estate auction. I have more vintage fishing equipment that I will be putting on soon so follow me. Thank you
|
|
Vintage Union Hardware Steel Telescoping 9' Fishing Rod Pole Cork Handle
Vintage Union Hardware Steel Telescoping 9 Foot Fishing Rod. Normal wear from regular use over the years.see photos. Needs to be oiled as it is a little stiff when collapsing/expanding the rod. Measures 9' long. 40" when collapsed. All eyelets are good. Cork handle is good. Some wear but no chunks missing(like a lot of them have) If you have any questions please contact me through Ebay messages prior to buying. Please review all photos for condition and item details.
|
|
Vtg Union Hardware Steel Bait Casting Rod Pat. 1933
Vintage Union Hardware steel bait casting rod. Measures 55" long/ Cork handle. Patented 1933(1923035) reel lever type fastener. Looks like stainless steel metal. Cork handle has a chip at bottom. Red glass guides. End guide is broken in middle. Don't know if the end guide had a glass guide at one time. Lever reel lock works great. I just tried a old reel I had to see if it would work. You are bidding on the rod only not the reel. Rod is a pea green in color. I see no other defects other that the cork handle chip& the rod tip broken. Good luck. Shipping and handling would be $10.00 in USA. Foreign shipping would be more. Contact me for a quote. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-148ed953e8f-0x10c-
|
|
Vintage 1940s Union Hardware 3 pc. 5 ft. Steel Fishing Rod U.S.A..
Vintage 1940s Union Hardware 3 pc. 5 ft. Steel Fishing Rod U.S.A. This Vintage per-owned 1940s Steel Fishing Rod is by The Union Hardware Company. Torrington Conn. U.S.A. Not only Collectable but fishable. This Union Rod is in good per-owned C+ condition. You will find surface cosmetic blemishes; the guides and cork handle are good. Fits tight. Review photos. Bid accordingly THANKS FOR LOOKING. CHECK OUT MY OTHER ITEMS. ALWAYS SOMETHING NEW! Sales outside of the U.S.A. will be available upon request excluding China
|
|
Antique Samson Steel Rod Union Hardware Co. Fishing Rod 7.75 Feet C. 1920's
Description: We have recently been fortunate enough to have acquired some terrific antique fishing gear. For bidding is a beautiful American made steel rod. It measures just over 7.75 feet in total length when assembled and is completely black with the exception of the handle. The tube ferrules have a male and female fitting and the handle has a single hand grip made of cork with a metal butt. The reel seat reads"Samson Steel Rod Union Hardware Co Torrington. Conn. USA" and is in good well used condition with some rust and the ferrules are tight when assembled. It comes with original pouch which shows clear signs of wear. A fresh estate find! Payment: Preferred payment method is PayPal however we are willing to accept other forms upon request. Payment for items is expected within 3 days of purchase. Shipping: Shipping is handled ... morethrough USPS unless otherwise specified. Items over $200 will include ship cover insurance and/ or signature confirmation. We ask one day for handling however items paid the day of purchase before 1:00 PM Eastern Standard time are likely to ship that day. Local pick-up is also an option free of charge. About Us: We are a New England company based in Rhode Island and have been working to transition from the traditional brick and mortar into the age of technology. We work mainly on the acquisition and liquidation of estates of all sorts. The majority of the items offered is acquired from New England estates and may vary from jewelry to china or artwork and even electronics on occasion. Contact Us: We do understand the need to speak to a live person occasionally. Our reception hours are Monday- Thursday 10:00 AM-3:00 PM at(401)781-1181. While we are happy to assist with any problems please provide eBay as the reason for the call so that you may be properly directed. IMPORTANT: Terms of Sale: Since our items are from estates they are almost always one of a kind. We do not offer exchange for this reason. Returns are ONLY accepted in the event that the item was GROSSLY misrepresented
|
|
Union Hardware Sunnybrook Steel Rod vintage 4 piece pack rod and sleeve
Neat old steel pack rod for spin casting. Sunnybrook Steel Rod by Union Hardware Co. Torrington CONN. Lightweight rod. 4 1/2 feet long, steel construction, cork handle, cloth sleeve, excellent condition, practically indestructible.
|
|
Vintage union hardware steel rod 3 piece 48" long aget eyelets
Up for bid a vintage Union Hardware 3 piece steel fishing rod with agett eyelets one is loose not in to bad of shape for the age the rod is 48 3/4" long very old please feel free to ask any questions i will try to answer.
|
|
Union Hardware Co. Torrington Conn. Telescopic Steel Casting rod 50"
Offered is a vintage Union Hardware Co. telescopic steel casting rod. The rod when retracted is 18" in length. The rod when extended is 50" in length. It extends and retracts with no problems. I believe these are agate eyes. And all seem to be in good condition. I don't believe the tip is original and is broken and being held on with adhesive. It does have some rust and corrosion. The rod will be shipped priority mail in a Ready Post mailing tube. Please look at the photo's closely and judge for yourself as to the condition of this rod. I DO combine shipping. I"AM NOT AN EXPERT" in the field of fishing lure evaluations. I describe the lures to the best of my ability and my descriptions reflect my personal opinion as to condition. If you are a collector or lure expert and intend to purchase. Please ask all pertinent ... morequestions and request more pictures which would help in your purchasing decisions BEFORE you place your bids or purchase our items. Thanks very much, Richard Check out my!
|
|